30744966 Volvo C30 S40 V50 Front Bumper Impact Absorber Crash Beam 2006-2012
30744966 Volvo C30 S40 V50 Front Bumper Impact Absorber Crash Beam 2006-2012
Volvo C30 S40 V50 Front Bumper Impact Absorber Crash Beam 30744966 2006-2012
Used Volvo factory front bumper impact absorbing support beam for the front bumper area. Designed to help position and support the bumper assembly and absorb/distribute low-speed front impact energy. Please match the part number, shape, mounting points and vehicle body style before ordering.
What You Are Buying
This listing is for a front bumper impact absorbing beam / bumper support absorber for Volvo C30, S40 and V50 models using matching part number 30744966. It fits behind the front bumper cover, in the front crash/bumper support area.
Important Fitment Rule
The best way to confirm fitment is by checking the part number and photos, not only the eBay compatibility dropdown. If your old part shows 30744966 and the mounting points match, this is the correct type of part to compare against.
Need Help?
Send us your registration, VIN, old part number and a photo of your existing part before ordering. We can help verify fitment so you buy the correct part first time and avoid return delays.
Key Part Details
Possible related numbers seen in parts catalogues and dismantler references can include 30744965 and 30744964. These are not automatic substitutes. Please match your old part number, mounting points and body style before buying.
Compatibility Table - Cars This Part Is Intended To Fit
Fitment has been written conservatively to reduce wrong orders. Please use this table together with the part number 30744966, your vehicle body style and a photo comparison of your old part.
| Status | Make | Model | Body Style | Years | Engine / Variant Notes | Must Match |
|---|---|---|---|---|---|---|
| Will fit when matched | Volvo | C30 | 3-door hatchback | 2006-2012 | Petrol and diesel variants including 1.6, 1.8, 2.0, 2.4i, T5, 1.6D, 2.0D and D5 where the original part matches. | Part number 30744966, same front bumper support shape and mounting points. |
| Will fit when matched | Volvo | S40 II | 4-door saloon | 2006-2012 | Petrol and diesel P1 platform vehicles where the bumper support/absorber number and shape match. | Part number 30744966, same body/front bumper layout. |
| Will fit when matched | Volvo | V50 | 5-door estate | 2006-2012 | Petrol and diesel estate models where the original front bumper absorber/support beam matches. | Part number 30744966, same mounting points and front panel layout. |
Cars / Parts This Listing Does Not Fit Without Verification
| Do Not Order For | Reason | What To Check |
|---|---|---|
| Volvo V40 2012-on, S60, V60, V70, S80, XC60, XC90 | Different model platform and bumper structure. | Only buy if your old part number, shape and mounting points are identical. |
| Rear bumper beam / rear crash bar | This listing is for the front bumper area only. | Confirm front placement before purchase. |
| Painted bumper cover / bumper skin | This is the hidden support/absorber behind the bumper cover, not the painted exterior bumper. | Compare the actual part photo and mounting shape. |
| Headlight brackets, slam panel, grille, fog lights or parking sensors | These are separate parts and are not included unless clearly shown in the item photos. | Ask us to confirm what is included before ordering. |
| S40/V50 early years or facelift variations outside this listing range | Some catalogue references can overlap, but bumper equipment and part revisions may differ. | Send your VIN, registration and old part photo for checking before purchase. |
Fitment Verification - Please Read Before Buying
To reduce wrong orders and avoid returns, please check:
- Your vehicle is a Volvo C30, S40 or V50 in the listed year range.
- Your body style matches: C30 3-door hatchback, S40 saloon, or V50 5-door estate.
- Your old part number matches 30744966, or your part visually matches this listing.
- The mounting holes, fixing points, shape and bumper layout match your original part.
- The delivery address at checkout is correct. We must dispatch to the address supplied on the eBay order and cannot change it afterwards.
Buyer-error returns where the customer has not checked part numbers, photos, body style or fitment may be subject to a restocking/handling deduction where permitted by eBay policy. If you are unsure, contact us before ordering and we will help verify compatibility.
Where The Part Fits
This front bumper impact absorber/support beam is fitted behind the painted front bumper cover. It sits in the front bumper structure area and helps locate/support the bumper assembly.
This part does not electronically control anything. Its job is structural: supporting the front bumper layout, helping maintain front-end alignment and contributing to impact energy absorption in the bumper area.
Faulty / Damaged Part Symptoms
- Front bumper sits low, uneven or loose.
- Uneven gaps around headlights, bonnet or front wings after a knock.
- Rattling or movement from the front bumper area.
- Visible cracks, bends, broken fixings or crushed absorber section.
- Bumper cover does not clip back correctly after removal.
- Repair needed after light front impact or cosmetic front-end damage.
Why Buy A Factory Volvo Used Part?
- Designed for Volvo mounting points and bumper layout.
- Better fit and alignment than many cheap copy parts.
- Can save as much as 70% compared with buying new from a main dealer.
- Reusing original parts helps reduce waste and keeps vehicles on the road.
- Inspected, stocked and ready to dispatch from ThePartPilot.
Condition Notes
This is a used car part. Please expect normal age-related marks, storage marks, road dirt, surface scratches, minor corrosion or cosmetic wear. The part is sold as a functional replacement part, not a brand-new showroom item.
Material and finish can vary by vehicle specification and part revision, so please compare the shape, fixing points and part number shown on your existing part. This listing is for the front impact absorber/support beam only unless extra parts are clearly shown in the listing photos.
Fitting Instructions - Guide Only
Professional fitting is recommended. Exact procedure can vary depending on engine, bumper type, fog lights, headlamp washer system, parking sensors and trim level.
- Park safely on level ground, apply the handbrake and disconnect the battery if electrical bumper equipment will be unplugged.
- Raise the front of the vehicle safely using a ramp or jack and axle stands. Never work under a vehicle supported only by a jack.
- Remove lower undertray fixings, wheel arch liner fixings and lower bumper fixings as required.
- Remove grille/upper bumper fasteners where fitted and carefully release the bumper cover from the side clips.
- Disconnect fog lights, parking sensors, headlamp washer pipes or temperature sensor wiring if fitted.
- Remove the damaged front absorber/support beam fixings and lift the old part away.
- Offer up the replacement part, align all locating points and install fixings by hand first to avoid cross-threading.
- Tighten fasteners to the correct workshop manual specification and check that the bumper cover aligns correctly.
- Reconnect all wiring/washer pipes, refit arch liners and undertrays, then check lights, sensors and panel gaps.
Required Tools
- Socket set, commonly including 8mm, 10mm and 13mm sockets.
- Torx bit set.
- Trim clip removal tools.
- Flat and Phillips screwdrivers.
- Pliers.
- Jack and axle stands or workshop ramp.
- Gloves and eye protection.
- Torque wrench recommended for final tightening.
Estimated Repair Time
Typical fitting time is around 1.5 to 2.5 hours for a competent DIY mechanic or around 1.0 to 1.8 labour hours in a garage, depending on vehicle specification and condition of fixings.
Vehicles with parking sensors, headlamp washers, fog lights, seized fixings or previous accident damage may take longer.
Fitting Service Available
We may be able to offer a fitting service subject to availability. Please contact us before purchase if you would like us to check fitting availability for your vehicle.
Garage Labour Cost Calculator - No JavaScript
Use this simple static guide to estimate garage labour cost. Formula: hourly labour rate × estimated labour hours = labour cost. Parts, VAT, fluids, clips and extra repair work are not included in this estimate.
| Garage Labour Rate | Estimated 1.5 Hours | Estimated 2.0 Hours | Estimated 2.5 Hours |
|---|---|---|---|
| £50 per hour | £75 | £100 | £125 |
| £60 per hour | £90 | £120 | £150 |
| £75 per hour | £112.50 | £150 | £187.50 |
| £90 per hour | £135 | £180 | £225 |
| £120 per hour | £180 | £240 | £300 |
Delivery, Collection & VAT
- UK delivery: Dispatched to the checkout address supplied on eBay.
- Address rule: Please make sure your checkout address is correct. We cannot change the delivery address after purchase.
- Worldwide postage: Available through eBay Global Shipping Programme where eligible.
- Collections: Collections available 7 days a week until 8pm by appointment, including bank holidays by prior appointment.
- VAT: Sold under the Global VAT Scheme. No VAT is charged separately and no VAT amount is shown separately.
eBay Global Shipping Programme Countries
Eligible GSP destinations listed by eBay UK include: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Islands, United Arab Emirates, Ukraine, Uruguay, USA and Vietnam.
Final international postage cost, customs handling and eligibility are controlled by eBay at checkout.
Scan the QR code to contact ThePartPilot on WhatsApp for fitment help, collection appointments or fitting service availability.
WhatsApp number. Please include your registration, VIN, part number and clear photos of your old part.
All eBay purchases must be completed through eBay. Collection and fitting are strictly by prior appointment.
We Also Buy Cars For Cash
ThePartPilot also buys cars for cash with nationwide collection and same-day payment available. Damaged, non-running, accident damaged or end-of-life vehicles considered. Contact us with your vehicle details for a fast quote.
Why Buy From ThePartPilot?
- More than 25,000 used vehicle parts in stock and on the shelf.
- Part number and photo-led compatibility checks to reduce wrong orders.
- Premium used parts at a fraction of new dealer prices.
- Worldwide postage through eBay GSP where eligible.
- Collection appointments available 7 days a week until 8pm.
- Friendly fitment support before purchase.