AUDI A1 8X 2011-2018 RHD Centre Console Cup Holder Trim 8X0863243A 8X0862533
AUDI A1 8X 2011-2018 RHD Centre Console Cup Holder Trim 8X0863243A 8X0862533
AUDI A1 8X RHD CENTRE CONSOLE & CUP HOLDER
|
25,000+ parts held across our stock |
RHD right-hand-drive fitment |
PHOTO part number verified |
GSP eligible international delivery |
THE ACTUAL PART FOR SALE
This listing is for the Audi A1 Type 8X interior centre console / centre tunnel assembly with cup-holder section shown below. The photographs are from this eBay listing. Please use them as the primary visual reference for colour, surface finish, mounting shape, openings and included components.
Actual item • underside / mounting reference • THEPARTPILOT
|
Actual close-up • moulded 8X0 862 533 • ABS marking visible
|
ITEM DETAILS & VERIFIED IDENTIFIERS
| Vehicle make | Audi |
| Model family | A1 Type 8X / A1 Sportback Type 8X; S1 8X only where the same number, RHD layout and physical specification are confirmed |
| Part | Interior centre console / centre tunnel trim with cup-holder section |
| Main part number | 8X0863243A / spaced format 8X0 863 243 A |
| Photo-verified moulded number | 8X0862533 / 8X0 862 533 on the cup-holder component |
| Colour-coded catalogue references | 8X0863243A4PK (Soul black reference) • 8X08625336PS (Soul black drinks-holder reference) |
| Superseded / preceding number | 8X0863243 appears as the earlier console reference through 18 October 2010. Do not assume interchange solely from appearance; late-2010 vehicles require number/VIN checking. |
| Interchange Part Number | No additional cross-brand interchange number has been confirmed. Do not order for VW / SEAT / Škoda applications without a matching catalogue number and physical specification. |
| Drive position | RIGHT-HAND DRIVE (RHD) |
| Material | Moulded plastic; the photographed cup-holder component carries a visible >ABS< material marking |
| Colour / finish | Black / Soul-black family. Match the photographs because age, trim specification and surface finish can vary. |
| Placement | Interior centre tunnel between the front seats, surrounding the selector / handbrake / storage and cup-holder area |
| eBay item number | 147476574772 |
| Condition | Pre-owned original manufacturer-marked component. Expect normal age / use marks. Study all actual-item photographs before purchase. |
| Included | Only the components visibly present in the actual-item photographs. Switches, sockets, gaiters, armrest parts, fixings or trim inserts are not implied unless visibly included. |
⚠️ FITMENT FIRST — READ BEFORE ORDERING
Do not rely on registration year or eBay compatibility alone. For this interior part, the safest buying method is: 1) match 8X0863243A, 2) compare the physical shape/openings/mounting points with your current console, 3) confirm RHD, 4) check body style and options, and 5) request a VIN/registration fitment check through eBay messages if anything differs.
PARTS COMPATIBILITY CHART
| Vehicle | Body | Years | Fitment status / checks |
|---|---|---|---|
| Audi A1 8X | 3-door hatchback | 2011–2018 | Confirmed model family. RHD only. Match 8X0863243A, console shape, trim and options. |
| Audi A1 Sportback 8X | 5-door hatchback | 2012–2018 | Confirmed 8X Sportback family. RHD only. Match the current part number and physical layout. |
| Audi S1 8X | 3-door hatchback | 2014–2018 | Cross-referenced application. Order only if RHD and 8X0863243A / identical physical specification are confirmed. |
| Audi S1 Sportback 8X | 5-door hatchback | 2014–2018 | Cross-referenced application. Order only if RHD and 8X0863243A / identical physical specification are confirmed. |
| Late-2010 Audi A1 8X | 3-door | Late 2010 only | Do not assume fit. Catalogue data shows earlier 8X0863243 through 18-10-2010. Buy only after exact number / VIN confirmation. |
- Your car is left-hand drive (LHD).
- Your car is the second-generation A1 Type GB (2019 onward).
- Your current console carries a different part number and you have not confirmed interchange.
- Your openings, mounting points, selector / handbrake arrangement, armrest specification or trim shape differ from the actual photos.
- You have an early-2010 car with the earlier 8X0863243 reference unless a VIN/parts-catalogue check confirms replacement by 8X0863243A.
- You are buying for another Volkswagen Group model solely because the part looks similar.
CORRECT VEHICLE & FITTING-LOCATION REFERENCE PHOTOS
Reference images only — not donor vehicle photographs. These are model/body-style illustrations to help buyers recognise the correct A1 8X generation. Exact bumpers, wheels, trim, gearbox and interior equipment can vary.
A1 8X • 3-door hatchback reference
|
A1 Sportback 8X • 5-door hatchback reference
|
WHAT THIS PART DOES & WHERE IT FITS
The centre console is the large interior trim structure running along the centre tunnel. It locates and supports the cup-holder/storage area and provides the finished surrounding structure around the gear-selector and handbrake zone. Depending on the vehicle specification, adjacent trim may also accommodate sockets, switches, armrest components or other inserts.
Important: this is an interior trim/support component rather than an engine or drivetrain control module. Electrical items nearby may need unplugging during removal, but the console itself does not control engine management.
COMMON SIGNS YOUR EXISTING CONSOLE MAY NEED REPLACEMENT
| ✓ Cracked or split plastic around mounting points | ✓ Broken cup-holder or storage moulding |
| ✓ Loose movement, rattles or poor panel alignment | ✓ Damaged clips / screw locations causing gaps |
| ✓ Heavy scratches, warping or impact damage | ✓ Poor fit around selector, handbrake or adjoining trims |
WHY CHOOSE AN ORIGINAL MANUFACTURER-MARKED PRE-OWNED PART?
Where the part number and specification match, an original manufacturer-marked component is designed around the vehicle’s intended mounting geometry, clip locations, neighbouring trim interfaces and surface design. Lower-cost copy parts can vary in moulding tolerances, texture, colour and mounting detail.
Choosing a serviceable recycled component can also be substantially less expensive than a new dealer-supplied replacement. The actual saving varies by part and current new-part pricing, so compare like-for-like prices rather than relying on a fixed percentage claim.
The most important benefit is correct identification: matching the number and shape before purchase is far more valuable than ordering by model name alone.
FITTING GUIDE
- Park safely, switch the ignition off, remove the key and protect surrounding trim.
- If fitted, remove / release the centre armrest-related trim and rear console inserts required for access.
- Use a non-marring trim wedge to release the gear-lever / selector surround as applicable. Manual and S tronic trim layouts differ.
- Remove the relevant cup-holder / storage insert and lift any lining mats hiding console fasteners.
- Remove the centre-console securing bolts / screws, keeping each fastener organised for refitting.
- Lift the rear of the console carefully and guide it over / around the handbrake area without forcing the plastic.
- Pull the console rearward from the dashboard interface, lifting it over the selector as required.
- Disconnect any electrical connectors attached to sockets / switches in the console area before fully removing it.
- Transfer only the trim, clips or electrical items required from your existing console, checking every mounting point before installation.
- Refit in reverse order. Confirm all clips are seated, the selector and handbrake operate freely, wiring is not trapped and no fasteners are left loose.
Recommended tools
Non-marring trim/removal wedge • suitable Torx/hex/driver-bit set for the fasteners on your vehicle • small ratchet and extension • small pick/flat trim tool • torch • protective cloth/masking tape • container for fasteners. Verify the exact bit sizes on your vehicle before starting.
ESTIMATED REPAIR TIME & STATIC GARAGE LABOUR CALCULATOR
Planning allowance: approximately 0.75–1.5 labour hours for a competent technician on a straightforward vehicle. This is not a manufacturer book time. Extra time may be required for armrest equipment, damaged clips/fasteners, electrical accessories, trim transfer or previous repairs.
Formula: hourly labour rate × 0.75 to 1.5 hours = estimated labour-only range.
| Garage rate | 0.75 hr | 1.0 hr | 1.5 hr |
|---|---|---|---|
| £50/hr | £37.50 | £50 | £75 |
| £60/hr | £45 | £60 | £90 |
| £70/hr | £52.50 | £70 | £105 |
| £80/hr | £60 | £80 | £120 |
| £90/hr | £67.50 | £90 | £135 |
| £100/hr | £75 | £100 | £150 |
| £120/hr | £90 | £120 | £180 |
| £150/hr | £112.50 | £150 | £225 |
Illustrative labour estimate only; excludes the part, diagnostics, extra repairs, broken fixings, local taxes and any additional workshop charges.
🔧 FITTING SERVICE — SUBJECT TO AVAILABILITY
We may be able to provide fitting / repair assistance subject to workshop capacity, vehicle condition and the exact job required. Please message us through eBay before purchase if fitting is important to your order.
INTERNATIONAL DELIVERY VIA EBAY GLOBAL SHIPPING PROGRAMME
International delivery is available to eligible GSP destinations shown at eBay checkout, subject to item, address and programme restrictions. The checkout result is the final authority because destination coverage can change.
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden; Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Réunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Islands, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.
Any import duties, taxes or destination charges shown by eBay are determined through the programme / destination process and are separate from the item price unless checkout states otherwise.
VAT, ADDRESS & RETURNS INFORMATION
BEFORE YOU CLICK BUY — 60-SECOND MATCHING CHECK
| 1. Part number | Does your original match 8X0863243A or has an Audi parts check confirmed it as the correct replacement? |
| 2. Drive side | Is the vehicle right-hand drive? |
| 3. Generation | Is it an A1 / S1 Type 8X, not the later Type GB? |
| 4. Body / year | 3-door A1: 2011–2018; 5-door A1 Sportback: 2012–2018; S1/S1 Sportback: 2014–2018 subject to exact number/specification. |
| 5. Shape / options | Compare selector opening, handbrake area, cup holder, armrest provision, sockets, clips and mounting points with the actual photos. |
| 6. Still unsure? | Message us through eBay with your registration/VIN and a clear photo of your existing part number / console before ordering. |
📦 THEPARTPILOT — STOCK, PACKING & DISPATCH
We keep more than 25,000 parts across our stock at any one time. Our aim is straightforward: identify the part clearly, show the actual component, give buyers a detailed fitment chart and help the correct part arrive first time.
♻️ SUPPORTING REUSE & A LOCAL SMALL BUSINESS
Thank you for considering ThePartPilot. Choosing a serviceable pre-owned vehicle component keeps an existing part in productive use rather than discarding it unnecessarily, while giving buyers another repair option alongside purchasing newly manufactured replacement parts. Every correct-fit order also supports a local small business centred on dismantling, identifying, storing, packing and supplying vehicle parts.
MATCH THE NUMBER • CHECK THE PHOTOS • BUY THE CORRECT PART FIRST TIME
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.