Audi A1 8X Sportback 5 Door 2012-2018 N/S Left Rear Door Module 8X0959795D
£18.64
Skip to product information
Audi A1 8X Sportback 5 Door 2012-2018 N/S Left Rear Door Module 8X0959795D
£18.64
THEPARTPILOT
Audi A1 8X Sportback 5-Door Left Rear Door Control Module
Part number: 8X0 959 795 D / 8X0959795D
2012–2018 A1 8X Sportback Vehicle Left Rear / UK N/S/R Actual Used Part PhotographedTHEPARTPILOT • VERIFIED-PART-NUMBER LISTING • THEPARTPILOT
Fitment must be verified before purchase. This module is advertised for the first-generation Audi A1 8X Sportback 5-door, model years 2012–2018, for the vehicle's physical left-rear door (UK near-side rear). Your removed unit should show 8X0959795D, or a VIN-confirmed manufacturer supersession.
Do not rely only on eBay's automated compatibility suggestions. Match the photographed label, connector layout, door position and full part number. Send the complete 17-character VIN and a clear photo of the old module label through eBay Messages when verification is required.
25,000+parts held in stock
30 Daysseller warranty shown on listing
7 Dayscollection by appointment
Up to 8pmpre-arranged collection
Actual Item Photographs
The photographs below show the used module supplied. Compare every label, socket, mounting point and casing feature with your original unit.
Label confirmation: 8X0 959 795 D, hardware H08, Made in Ireland, production marking 04/15.
Donor marking: N/S/R A1 2018, identifying UK near-side rear / physical left-rear use.
Actual used item: normal storage and removal marks may be present; inspect all listing photos.
Correct Vehicle Reference — Audi A1 8X Sportback 5-Door
Reference vehicle only; vehicle colour, trim, wheels, engine and specification do not determine module compatibility. The vehicle must be the 8X-generation 5-door Sportback and the part number/coding must match.
Confirmed and Conditional Compatibility Chart
| Vehicle | Years | Body / position | Fitment status |
|---|---|---|---|
| Audi A1, first generation, type 8X | 2012–2014 | Sportback 5-door; physical left-rear door / UK N/S/R |
Conditional fit Existing module must match 8X0959795D, or VIN must confirm a valid supersession. Coding/equipment must be compatible. |
| Audi A1, first generation, type 8X facelift | 2015–2017 | Sportback 5-door; physical left-rear door / UK N/S/R |
Conditional fit Match full part number, plugs and coding; verify by VIN where uncertain. |
| Audi A1, first generation, type 8X | 2018 | Sportback 5-door; physical left-rear door / UK N/S/R |
Conditional fit Only the outgoing 8X generation. The donor marking on this item states A1 2018. VIN must confirm 8X, not the later GB generation. |
This Part Is Not Advertised To Fit
| Excluded application | Reason |
|---|---|
| Audi A1 3-door hatchback | No fit: the 3-door body has no rear side doors. |
| Audi A1 type GB / second generation, including 2019–2026 | No fit: different vehicle generation and electronics architecture. A 2018 registration alone is not sufficient; decode the VIN. |
| Right-rear door or either front door | Not claimed: this used item is marked N/S/R and is offered for the physical left-rear door. |
| Any vehicle with a different label number, plug arrangement or incompatible coding | Do not order: similar-looking modules are not automatically interchangeable. |
| Audi Q3 8U or Škoda Superb 3T | Some catalogues associate this number with additional group vehicles, but equipment, side assignment and software coding vary. Direct compatibility is not confirmed by this listing; purchase only after VIN and diagnostic verification. |
Possible catalogue cross-reference: 8X0959795B may appear as an earlier or related number. It is not an automatic substitute. Confirm the VIN, installed equipment and coding before ordering.
Part Identification and Specification
| Primary part number | 8X0959795D / spaced format 8X0 959 795 D |
|---|---|
| Part type | Rear door electronics control module / door control unit / window and locking control ECU |
| Door location | Inside the physical left-rear door; UK terminology: near-side rear (N/S/R) |
| Vehicle platform advertised | Audi A1 8X Sportback 5-door, 2012–2018, subject to VIN and label match |
| Visible hardware / production data | H08; 04/15 production marking; Made in Ireland |
| Construction | Moulded engineering-plastic housing, printed circuit electronics and multi-pin electrical connectors. Exact internal material composition is not published. |
| Condition | Used, removed from a vehicle; the actual item is photographed. Expect normal cosmetic marks consistent with removal and storage. |
| Included | Door control module shown in the photographs only. Door card, latch, window regulator, wiring loom, fixings and diagnostic coding are not included unless visibly shown. |
Where It Fits and What It Controls
This module is normally installed within the left-rear door assembly, close to the window regulator/motor and internal door wiring. It communicates with the vehicle network and manages or interfaces with rear-door functions according to the car's factory specification.
- Rear electric-window motor operation, one-touch function and limit learning.
- Central-locking commands and communication with the rear-door latch.
- Door-open / door-closed status reporting to the vehicle network.
- Anti-trap / pinch-protection adaptation for the window system.
- Optional door lighting or electric child-lock functions where the vehicle is equipped.
Important: not every A1 has every optional function. The replacement module may require coding and basic settings so that it matches the installed equipment.
Common Symptoms of a Faulty Rear Door Module
- Left-rear electric window is completely inoperative or works intermittently.
- One-touch window operation or anti-pinch protection is unavailable.
- Central locking does not lock or unlock the left-rear door correctly.
- Incorrect door-open warning, interior-light behaviour or alarm-related door status.
- Optional child-lock or door-lighting features stop working on that door.
- Diagnostic scan shows loss of communication with the rear-left door control unit, including faults associated with rear-left door electronics.
These symptoms can also be caused by broken door-jamb wiring, corroded connectors, a failed window motor/regulator, latch faults, low voltage or incorrect coding. Diagnose before ordering; replacing a control module without confirming the cause may not cure the fault.
Why Choose an Original Manufacturer-Marked Used Part?
- Correct physical design: factory connector positions, mounting geometry and casing dimensions are more likely to align with the vehicle's original installation.
- Vehicle-network compatibility: the correct manufacturer part number provides a stronger basis for matching software, coding and installed equipment than a generic low-cost copy.
- Known identification: the photographed label gives you a traceable number to compare with the removed unit.
- Cost control: used vehicle parts can cost up to 70% less than new in some cases. The actual saving varies by part, condition and current new-part price.
- Lower environmental impact: reusing a serviceable part extends its life and can reduce the demand for new manufacturing and waste.
Fitting Guide, Required Tools and Repair Time
Safety: this is a general workshop overview, not a substitute for the manufacturer repair manual. Disconnect the battery only in accordance with the vehicle procedure, retain radio/security information where applicable, protect side-airbag systems and obtain professional assistance when unsure.
Typical Tools
- Non-marring interior trim removal tools.
- Torx driver/socket assortment, commonly including T20, T25 and T30.
- Small ratchet and suitable sockets; pick tool for connector locks.
- Diagnostic equipment capable of VAG module coding, fault clearing and window basic settings.
- Multimeter and wiring information for fault diagnosis where required.
General Installation Sequence
- Confirm the VIN, module label, physical connector layout and door position before dismantling.
- Record a full diagnostic scan and save the coding/adaptation values from the original module where communication is possible.
- Switch off the ignition, remove the key and isolate power following the manufacturer procedure.
- Remove the left-rear door trim carefully; disconnect switches, lamps and cables without stressing the wiring.
- Access the door electronics/window-motor area and inspect the harness and connectors for moisture, corrosion or broken wires.
- Remove the old module, transfer only approved associated components if required, and install this replacement without forcing plugs or fixings.
- Reassemble the door, restore power, code the module to the vehicle where required and perform window limit / anti-pinch basic settings.
- Clear faults and test window travel, locking, door status and all fitted rear-door functions before returning the vehicle to service.
| Work type | Typical time | Notes |
|---|---|---|
| Experienced technician | Approximately 1.0–1.5 hours | Assumes normal access, no seized fixings or wiring repair, and straightforward coding/basic settings. |
| DIY / first-time repair | Approximately 1.5–2.5 hours | Allow additional time for careful trim removal, diagnosis and access to suitable diagnostic equipment. |
Static Labour-Cost Calculator
Formula: garage hourly rate × 1.0 to 1.5 labour hours. Diagnostic, coding, wiring repairs, consumables and VAT treatment by the garage may be additional.
| Garage rate | 1.0 hour | 1.5 hours |
|---|---|---|
| £50 per hour | £50 | £75 |
| £70 per hour | £70 | £105 |
| £90 per hour | £90 | £135 |
| £120 per hour | £120 | £180 |
Fitting service: workshop fitting and diagnostic support may be available subject to vehicle, workload and appointment availability. Ask through eBay Messages before travelling or purchasing fitting-related arrangements.
Workshop, Stock and Dispatch
Workshop support: fitting and repair services are subject to availability and prior arrangement.
Large stockholding: more than 25,000 vehicle parts are held on the shelf at any one time.
Prepared for dispatch: parts are packed for transport using suitable protective materials.
Workshop, warehouse and packaging photographs are illustrative stock/reference images. The actual sale item is shown in the dedicated item photographs above.
Delivery, Collection, Checkout Address and VAT
- UK and international delivery: worldwide delivery is offered to eligible destinations through eBay's Global Shipping Programme. Destination eligibility, total charges, import taxes and delivery options are displayed by eBay at checkout.
- Checkout address: we can dispatch only to the address supplied in the eBay checkout order. Check it carefully before payment because we cannot amend it after purchase.
- VAT: where applicable, used goods are sold under the VAT margin/global accounting scheme. VAT is not separately itemised or recoverable.
-
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Returns, Warranty and Ordering the Correct Part
The listing shows a 30-day seller warranty. Returns and refunds are handled under the stated eBay return policy, eBay rules and applicable statutory rights.
- Do not order by registration year, engine size, colour or visual similarity alone.
- Check the complete part number, suffix letter D, connector layout and physical left-rear location.
- For 2018 cars, decode the VIN to confirm the vehicle is type 8X rather than the later GB generation.
- Ask for VIN verification through eBay Messages before purchase if any detail differs or is unclear.
- Return the item in the same condition received, with identifying marks intact and all supplied components included.
- Any deduction for diminished value will be made only where permitted by eBay rules and applicable law.