Audi A4 B6 B7 2001-2008 NSR Rear Left Passenger Interior Door Handle 8E0839019C
Audi A4 B6 B7 2001-2008 NSR Rear Left Passenger Interior Door Handle 8E0839019C
Audi A4 B6 B7 Rear Left Interior Door Handle
UK nearside rear / passenger-side rear • part-number family 8E0 839 019 • black and silver finish
BUY BY PART NUMBER, POSITION, SHAPE AND COLOUR — NOT BY REGISTRATION YEAR ALONE. Rear left means the left side when seated in the vehicle facing forward. On a UK right-hand-drive car this is the nearside rear passenger door.
Actual Item You Will Receive
Used factory-fit Audi rear-left interior door pull and release-handle assembly. The donor marking identifies the item as NSR. Please study every image and compare the complete moulded number, trim colour, mounting points and cable or illumination specification with the part removed from your vehicle.
THEPARTPILOT
Actual front view — black carrier with silver-effect release lever.
THEPARTPILOT
Actual angled view — compare surface condition and profile.
THEPARTPILOT
Actual reverse view — donor marked 2.5 TDI V6 and NSR door handle.
THEPARTPILOT
Actual rear mechanism and mounting points — match before purchase.
Part Identification and Specification
| Part description | Rear left interior door pull / release handle and carrier assembly |
|---|---|
| Vehicle position | Left rear / UK nearside rear / NSR passenger-side rear |
| Visible number family | 8E0 839 019 / 8E0839019 |
| Matched service reference | 8E0 839 019 C / 8E0839019C; black trim reference is commonly catalogued as 8E0839019C7PE |
| Earlier reference | 8E0839019B7PE is listed as an earlier or superseded reference. Only buy when shape, colour and equipment match. |
| Colour / finish | Black or dark housing with silver-effect inner release lever. Compare photographs because trim shades and soft-touch finishes vary. |
| Construction | Moulded automotive plastic carrier with metal spring and pivot hardware and a silver-finish release lever |
| Function | Provides the interior hand pull and operates the rear-door latch release through the Bowden cable |
| Included | Only the complete used assembly shown in the actual photographs. Door card, Bowden cable, switches, lamps, screws and clips are not included unless visibly attached. |
| Condition | Used item with age-related marks. Inspect the close-up photographs for cosmetic condition before ordering. |
Exact Position — Where This Part Fits
This assembly mounts inside the rear-left door card. It is the long interior pull section surrounding the release lever. It does not replace the exterior handle, window regulator, central-locking actuator or child-lock mechanism.
Different part
Different part
THIS PART
Different part
Correct vehicle-generation reference photographs
Audi A4 B6 Avant, 5-door reference. The part fits the rear-left side door when the number and trim match.
Audi A4 B7 Avant, 5-door reference. Saloon compatibility is also listed below.
Vehicle reference photographs: Rudolf Stricker, CC BY-SA 3.0, via Wikimedia Commons. Reference vehicles identify the generation and body type; the vehicles pictured are not included.
Compatibility and Fitment Table
Fitment is chassis-, door-position-, colour- and part-number-dependent. Engine size does not determine this interior handle. The buyer must compare the original part before ordering.
| Make / model | Generation / body | Years / build range | Fitment status | Required checks |
|---|---|---|---|---|
| Audi A4 | B6 / 8E2 Saloon, 4-door | 2001–2005 registrations; B6 build period begins late 2000 | Fits rear left | Match 8E0 839 019 family, colour, lever shape and mountings |
| Audi A4 | B6 / 8E5 Avant, 5-door | 2001–2005 | Fits rear left | Match full reference and trim or equipment code |
| Audi A4 | B7 / 8EC Saloon, 4-door | Late 2004–2008; commonly 2005–2008 model years | Fits rear left | Match 8E0839019C family, colour and attachment points |
| Audi A4 | B7 / 8ED Avant, 5-door | 2005–2008 | Fits rear left | Match full reference, finish and any illumination provision |
| Audi S4 | B6/B7 Saloon or Avant with rear side doors | 2003–2008 | Part-number check required | Must use the same 8E0 839 019 left-rear assembly and matching interior colour |
| Audi RS4 | B7 Saloon or Avant only | 2006–2008 | Part-number check required | No Cabriolet fitment; match full number and trim before purchase |
| SEAT Exeo | Saloon 3R2 | 2009–2013 | Confirmed cross-reference, exact match only | Buy only when the old part reads 8E0839019C7PE and all features match |
| SEAT Exeo ST | Estate / 5-door | 2009–2013 | Confirmed cross-reference, exact match only | Full number, rear-left position, colour and mountings must be identical |
Symptoms of a Faulty Interior Door Handle
- The rear-left door opens from outside but will not release from inside.
- The silver lever feels loose, floppy, stiff or does not return normally.
- The handle carrier is cracked around a mounting point or cable retainer.
- The Bowden cable repeatedly detaches because the retaining feature is damaged.
- The pull handle moves excessively, rattles or separates from the door card.
- The soft-touch surface or trim is badly worn and requires a cosmetic replacement.
Replacement restores the intended internal release and provides a secure handhold for closing the rear door. A damaged release can become a safety and convenience issue, particularly for rear-seat occupants. Confirm that the latch, Bowden cable and child lock are functioning correctly before assuming the handle alone is at fault.
Why Choose a Factory-Original Used Part?
Correct factory geometry
Original mounting points, cable position, lever travel and door-card contour are designed around the vehicle's factory trim.
Better visual match
A matching used part is more likely to blend with the existing grain, shade and surrounding trim than a low-cost universal-style copy.
Lower cost than new
Used original parts can offer substantial savings and may cost up to 70% less than a new equivalent in some cases. Compare current prices because savings vary.
Reuse reduces waste
Reusing a serviceable component keeps useful material in circulation and reduces demand for newly manufactured replacement parts.
Fitting Guide, Tools and Repair Time
Estimated professional fitting time: approximately 45–90 minutes. Allow longer for first-time DIY work, seized fixings, damaged clips or additional diagnosis.
Commonly required tools
- Plastic trim-removal tools
- Torx drivers, commonly T20, T25 and T30 depending on vehicle specification
- Small flat trim tool or pick
- Quarter-inch ratchet, extension and suitable sockets where required
- Magnetic parts tray, torch, gloves and replacement door-card clips
General fitting sequence
- Switch the ignition off, remove the key and lower the window. Follow the Audi workshop procedure for electrical isolation before disconnecting any door wiring.
- Remove the concealed Torx screws from the armrest or handle area and the lower door-card positions.
- Use a plastic trim tool to release the door-card clips from the bottom and sides. Do not pull the panel away violently.
- Lift the door card upward from the window ledge and support it while disconnecting plugs and the interior release cable.
- Release the original handle or carrier from the rear of the door card, noting cable routing and the position of any light guide or trim pieces.
- Transfer only compatible components, install the replacement assembly and confirm that all retaining tabs and screws are secure.
- Reconnect the release cable and required electrical plugs. Test the internal and external opening functions before fully refitting the panel.
- Refit the door card from the top edge downward, align every clip and tighten screws without overtightening the plastic mountings.
Static Garage Labour Cost Calculator — No Active Content
Use the table as a quick labour-only estimate. Formula: garage hourly rate × charged hours. It excludes parts, clips, diagnosis, consumables, taxes and any minimum workshop charge.
| Garage rate | 0.75 hour | 1.0 hour | 1.5 hours |
|---|---|---|---|
| £40/hour | £30 | £40 | £60 |
| £60/hour | £45 | £60 | £90 |
| £80/hour | £60 | £80 | £120 |
| £100/hour | £75 | £100 | £150 |
| £120/hour | £90 | £120 | £180 |
ThePartPilot Stock, Workshop and Dispatch
ThePartPilot stocks more than 25,000 used vehicle parts at any one time. Parts are selected, photographed, stored and packed for dispatch. Collection can be arranged 7 days a week until 8pm by prior appointment, including bank holidays subject to availability. Arrange collection only through the eBay order and eBay Messages.
Illustrative warehouse reference — organised stock and handling environment. Not a photograph of the specific premises.
Illustrative workshop reference — fitting and repair services are subject to technician and booking availability.
Illustrative service photographs are used under the Unsplash licence and do not depict the specific item or premises.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Ordering, Address, VAT and Returns
- Checkout address: ensure the delivery address is correct before payment. We can only dispatch to the address supplied to eBay at checkout and cannot manually substitute another address.
- Fitment help: send the VIN, full old-part number and clear photographs through eBay Messages before ordering when uncertain.
- VAT: eligible second-hand goods are sold under the VAT margin or global-accounting scheme. VAT is not separately itemised on the invoice.
- International postage: eligible destinations and charges are displayed by eBay at checkout through its Global or International Shipping service.
- Returns: returns are handled under eBay policy. The exact part must be returned complete, unaltered and in the same condition. Where eBay permits, a deduction of up to 50% may be applied only to reflect actual loss in value when an item is installed, used, damaged, incomplete or returned in a different condition. There is no automatic restocking deduction simply because the buyer selected a particular return reason.
Support a Small Business and Keep Good Parts in Use
🚗♻️ Buying a tested, serviceable used component supports a UK small business, helps extend the useful life of vehicles and keeps reusable parts out of the waste stream. Every correctly matched recycled part represents material and manufacturing that does not need to be replaced unnecessarily. Thank you for choosing ThePartPilot and for checking fitment carefully before purchase. 📦🔧🌍