Audi A4 B6 B7 2002-2008 S4 2004-2008 RS4 2007-2008 Right Mirror Trim 8E0857506B
Audi A4 B6 B7 2002-2008 S4 2004-2008 RS4 2007-2008 Right Mirror Trim 8E0857506B
Audi A4 / S4 / RS4 B6 B7 Front Right Door Mirror Lower Trim Cover
Manufacturer reference 8E0 857 506 B / 8E0857506B / black finish reference 8E0857506B4PK
Actual item for sale
The first three photographs show the actual used trim supplied. Please inspect the face, rear retaining point, moulded reference and overall shape before ordering.
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
What this part is and where it fits
This is the textured black front-right door mirror lower trim / mounting-area cover. It sits at the front-right door mirror base, where the exterior mirror assembly meets the front door and window-frame area.
UK side terminology: OSF, offside front, driver-side front. For overseas buyers, use the physical position: right side when seated in the vehicle and facing forwards.
What it controls: this is a trim component and has no electronic control function. It covers and finishes the mirror mounting area, protects the exposed gap and helps the assembly sit with the intended factory appearance. It will not repair mirror heating, electric adjustment, folding, indicator or glass faults.
LOCATION REFERENCE: fitted at the base of the front-right door mirror.
Compare the actual part photographs and your old trim.
THEPARTPILOT REFERENCE
Vehicle image is a public-domain model reference and is not the donor vehicle or item supplied.
Part identification
Verified compatibility chart
Compatibility below is based on the manufacturer reference and catalog mapping. Registration years can overlap during model changes, so the reference number, side, shape and locating points must all match.
| Make | Model / platform | Catalog years | Body style covered | Position / checks |
|---|---|---|---|---|
| Audi | A4 B6 / B7, including A4 quattro | 2002-2008 | Saloon and Avant variants listed by catalog | Front right only. Match 8E0857506B and the photographed shape. |
| Audi | S4 B6 / B7 | 2004-2008 | Saloon and Avant variants listed by catalog | Front right only. Confirm the clip, contour and lower edge. |
| Audi | RS4 B7 | 2007-2008 | Catalog-listed RS4 applications | Front right only. VIN/reference verification recommended before purchase. |
Reference body styles
THEPARTPILOT REFERENCE
THEPARTPILOT REFERENCE
- Check your old part for 8E0 857 506 B or 8E0857506B.
- Confirm the physical side is front right; do not rely only on “driver” or “passenger” wording because this changes by market.
- Compare the long pointed profile, broad lower edge, rear central fixing point, foam pad and locating tabs with the actual photographs.
- Check the vehicle platform is B6/B7 8E rather than relying only on registration year.
- When uncertain, send your VIN and a clear photograph of the old part through eBay Messages before ordering.
- Front-left trim; the opposite side uses a different reference.
- Audi A4 B5 or Audi A4 B8 and later platforms.
- A5, A6, TT or other Audi ranges that may look similar.
- Any vehicle with a different moulded reference, fixing point, contour or mirror-base design.
- Cabriolet and 2009 overlap applications are not included in the guaranteed table above unless the VIN and exact old-part reference have been verified.
- No non-Audi cross-make application is confirmed for this listing.
Symptoms of damaged or missing trim
- Cracked, split, faded or visibly damaged trim at the mirror base.
- Broken retaining point causing the panel to sit loose, lift away or rattle.
- Uneven gap between the mirror mounting area, door and window frame.
- Exposed fixing or foam area where the trim is missing.
- Water, dirt or wind-noise concerns around the area after adjacent trim has been damaged or disturbed; check seals separately because this cover is not a substitute for a failed weather seal.
Why choose a used factory-original trim
Designed for the original contour
Factory trim is shaped around the original door, mirror base, locating points and surrounding gaps. A copy can look close in a photograph while differing at the clip, edge radius or surface texture.
Correct visual finish
The original textured finish is more likely to match the neighbouring aged trim than a new low-cost reproduction with a different grain or shade.
Lower-cost repair
Depending on the part and current new price, buying a used original component can cost up to 70% less than buying new. Compare current prices because savings vary by item.
Reuse before replacement
Reusing a serviceable vehicle component keeps an existing part in circulation and reduces demand for new material, manufacturing and disposal.
Fitting guide, tools and estimated time
Suggested tools
- Nylon trim-removal tool and a thin plastic wedge.
- Low-tack masking tape to protect the painted and glass-adjacent edges.
- Work light, clean gloves and a soft cloth.
- Small Torx set only if adjacent trim or mirror access must be loosened on the specific vehicle.
Typical installation sequence
- Park safely, switch off the ignition, remove the key and open the front-right door.
- Compare the replacement with the old trim before removal: number, profile, side, tabs and central retaining point must match.
- Protect nearby paint and glass edges with low-tack tape. Use a nylon tool at the accessible broad edge rather than levering the pointed end.
- Support the trim and release the retaining point gradually. Do not twist the long pointed section or use a metal screwdriver against visible surfaces.
- Clean the seating area and inspect the receiving clip, foam and adjacent seal. Transfer only matching reusable pieces where the design requires it.
- Locate the hooked or shaped edges first, align the central retaining point, then press evenly until the trim sits flush without a forced gap.
- Close the door carefully, check window travel and confirm the mirror assembly and trim do not foul each other.
Estimated repair time: approximately 15-30 minutes for an experienced fitter where no adjacent damage or seized fixings are present. Allow 0.25-0.50 labour hour. This is an estimate, not a manufacturer book time.
Static garage labour estimator - no active content
Formula: hourly labour rate multiplied by estimated time. Parts, VAT treatment, diagnostics, broken clips and additional work are not included.
| Garage rate | 0.25 hour estimate | 0.50 hour estimate |
|---|---|---|
| £50 per hour | £12.50 | £25.00 |
| £70 per hour | £17.50 | £35.00 |
| £90 per hour | £22.50 | £45.00 |
| £120 per hour | £30.00 | £60.00 |
Workshop, stock and dispatch
Repair support
Workshop fitting and repair work may be available by prior arrangement. Illustrative stock image; not the actual listed item or a representation of a confirmed booking.
25,000+ parts in stock
Large used-parts inventory held for rapid picking and dispatch. Illustrative stock image.
Careful dispatch
Items are selected, checked against the order and packed for transport. Illustrative stock image.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Delivery, collection, VAT and ordering information
UK and international delivery
International delivery is available for eligible items and destinations through eBay's Global Shipping Programme. eBay shows destination eligibility, postage, taxes and import charges at checkout. Because eligibility and exclusions can change, the checkout page is the final confirmation rather than a fixed country list in this description.
Checkout address
Collection
Collection may be available by prior appointment seven days a week up to 8pm, including bank holidays, subject to availability. Arrange and confirm collection through eBay Messages before travelling.
Global Accounting VAT Margin Scheme
Where this used item is sold under the Global Accounting VAT Margin Scheme, VAT is accounted for on the seller's margin. VAT is not shown separately on the sale and is not reclaimable by the buyer. No additional VAT is added to the displayed item price.
Returns and fitment responsibility
Returns are handled under the eBay return policy displayed on this listing and applicable statutory rights. Please use the reference number, side, platform and actual photographs to verify compatibility before ordering. Any eBay-permitted refund deduction can only reflect an actual loss in value when an item is returned used, damaged, incomplete or in a different condition; it is not an automatic restocking charge.