Audi A4 B8 2008-2015 NSR Rear Left Door Lock Latch Actuator 8K0839015C
£15.06
THEPARTPILOT
Used original-fit vehicle part | UK stock | 30-day seller warranty
Audi A4 B8 2008-2015 Rear Left / NSR Door Lock Latch Actuator
VISIBLE PART NUMBER: 8K0 839 015 C
THEPARTPILOT | IMAGE AND LISTING BRAND PROTECTION
✓Exact-number checks
25K+Parts in stock
7/7Collection by appointment
30Day seller warranty
Important: buy by part number, position and connector
This listing is for the REAR LEFT door only. On a UK right-hand-drive vehicle this is normally the nearside/passenger-side rear door. The exact number visible on the supplied unit is 8K0 839 015 C. Do not buy using model and year alone. Compare the stamped number, plug, cable layout, body shape and mounting points with your old lock.
This is a used factory-fit electromechanical rear door latch and central-locking actuator assembly. It mounts inside the rear-left door at the trailing edge and secures the door to the body striker while responding to central-locking commands.
Position:
Rear left / NSR / nearside rear on UK vehicles
Part number:
JA6 - 8K0 839 015 C
Operating type:
Electric latch/lock actuator with mechanical cable linkages
Connector:
Catalogue cross-reference indicates a 6-pin electrical connection; physically compare before ordering
Actual item photographs - supplied part
The photographs below are hosted on eBay's own image network and show the used item supplied. Cosmetic marks are expected on a used internal door component. Please inspect every image before purchase.
Actual item - complete latch body and cable arrangement.Actual item - compare electrical plug, bracket and cable routing.Actual item - visible identification includes JA6 and 8K0 839 015 C.
Where this part fits on the vehicle
Audi A4 B8 facelift 4-door saloon reference. The lock sits inside the rear-left door at its rear edge. Photo: Thomas doerfer / Wikimedia Commons, CC BY 3.0.
Audi A4 B8 Avant 5-door estate reference. The same rear-left position is shown; exact number and PR-code confirmation remain essential. Photo: M 93 / Wikimedia Commons, attribution licence.
Location: behind the rear-left door trim and inner carrier/moisture barrier, attached near the door's closing edge. It connects to the inside/outside handle cables and the vehicle's central-locking wiring.
Primary confirmed catalogue fitment
The table below is based on the exact visible number 8K0839015C. Vehicle equipment codes can still change the required latch, so the old part number and connector must match or fitment must be confirmed by VIN and PR codes.
Make / model
Platform
Years
Body / position
Required checks
Audi A4 / S4
B8 / 8K
2008-2015
Saloon or Avant, rear left only
Match 8K0 839 015 C, connector, cable layout and PR equipment
Audi A4 allroad quattro
B8 / 8K
2010-2016
5-door estate, rear left only
Exact number and VIN/PR-code check required
Audi RS4 Avant quattro
B8 / 8K
2013-2016
5-door estate, rear left only
Exact number and vehicle equipment must match
Additional catalogue cross-reference vehicles
Do not order for another vehicle from this table alone.
The number is catalogued across several VAG/Porsche applications, but body style, PR codes, child-lock type, central-locking equipment and connector details can differ. Send your VIN and a clear photograph of your old latch through eBay Messages before purchase.
Vehicle
Platform
Catalogue years
Position / restriction
Audi A3 Saloon or Sportback
8V
2013-2020
Rear left; exact-number and PR-code verification required
Audi A5 / S5 Sportback
8T / 8TA
2009-2016
Sportback rear left only; not the 2-door Coupe or Cabriolet
Audi A8 / S8 quattro
4H
2010-2017
Rear left; verify equipment and connector
Audi Q3
8U
2012-2018
Rear left; exact-number confirmation required
Audi Q5
8R
2009-2017
Rear left; exact-number confirmation required
Audi Q7
4L
2010-2015
Rear left; VIN/PR-code verification required
Audi RS3 Sportback
8V
2016
Rear left; exact-number confirmation required
Audi RS Q3
8U
2014-2018
Rear left; exact-number confirmation required
Porsche Macan
95 / 95B
2014-2018
Rear left; confirm by VIN and old part number
Porsche Panamera
970
2010-2016
Rear left; confirm by VIN and old part number
This part will not fit
Wrong side or position
Not for front doors and not for the rear-right/offside door.
Wrong A4 generation
Not automatically suitable for A4 B7/8E or A4 B9/8W.
Wrong A5 body
Do not use for a 2-door A5/S5 Coupe or Cabriolet merely because a general catalogue page mentions A5.
Different suffix or equipment
Do not assume 8K0839015D, 8K0839015F, 8K0839015G or another suffix is interchangeable without VIN/PR-code confirmation.
Will not fit if your old unit has a different electrical plug, pin arrangement, cable layout or mounting body.
May not fit vehicles with different child-safety-lock, keyless-entry, soft-close/power-latching or door-control equipment.
Model year, registration number or eBay compatibility alone is not enough for a definitive match.
Five-point buyer fitment check
Confirm the failed lock is in the rear-left door.
Read the full number from your old latch and match 8K0 839 015 C.
Compare the electrical plug shape, keying and pin layout with the actual listing photos.
Compare every cable, lever, bracket and mounting point - not only the plastic housing colour.
If any detail differs, send the VIN and clear photos of both sides of the old part through eBay Messages before ordering.
What this component controls
Mechanical door retention
The latch grips the body striker and keeps the rear-left door securely closed.
Central locking
The integrated actuator changes between locked and unlocked states when commanded by the vehicle.
Handle release
Bowden cables and levers transfer movement from the interior and exterior door handles.
Door-status signalling
Depending on vehicle specification, internal switches can inform the car whether the door is open, closed, locked or safe-locked.
Common symptoms of a failing rear door lock
Rear-left door will not lock or unlock from the remote, keyless system or central-locking switch.
Intermittent operation, repeated clicking or a lock that works only after several attempts.
Door remains shown as open when fully shut, causing a warning, interior light or alarm issue on applicable vehicles.
Inside or outside handle releases inconsistently even though the cable is correctly attached.
Latch sticks, will not release, will not hold the striker or feels mechanically rough.
Child-safety or safe-lock behaviour does not operate as expected, depending on equipment.
A faulty latch can affect vehicle security and safe door closure. Diagnose wiring, fuses, door control modules, broken loom wires and handle cables before replacing the latch, because similar symptoms can have more than one cause.
Construction and part details
Electromechanical latch
6-pin catalogue reference
Rear-left application
Integrated cable linkages
Used original-fit component
The moulded housing carries visible engineering-material markings including PBT-GF30+ASA, with metal latch parts and cable/lever components. The robust factory-fit design is shaped for the vehicle's original door carrier, striker geometry, connector and control system.
Why choose a used original-fit unit instead of a low-cost pattern copy?
Correct factory mounting geometry, cable positions and connector design when the full number matches.
Original striker engagement and door-handle travel characteristics.
A used part can deliver substantial savings compared with dealer-new pricing; savings vary by part and can sometimes reach around 70%.
Reusing an existing serviceable component reduces the demand for new material and manufacturing.
Fitting guide
Safety notice: A door latch is a security and occupant-safety component. The procedure varies by body style and equipment. Professional fitting is recommended. Use manufacturer repair information and torque settings for the exact VIN.
Park safely, raise the window, switch off the ignition and remove the key. Follow vehicle procedures before disconnecting the battery negative terminal where required.
Protect the painted door edge. Remove the rear door-card screws and release the trim clips with plastic tools.
Lift away the door card and disconnect switches, lighting plugs and the interior-handle cable.
Carefully peel back the moisture barrier or remove the inner carrier/access panel as required. Avoid tearing the seal.
Photograph the original cable routing. Disconnect the electrical plug and release the Bowden cables and clips from the latch.
Remove the latch fasteners at the trailing edge of the door using the correct Torx or XZN/triple-square bit.
Withdraw the old latch. Compare part number, connector, levers, cables and mounting points side by side before installing the replacement.
Install the replacement, route cables without kinks and tighten fasteners to the manufacturer's specified torque.
Before refitting the trim, test central locking, interior and exterior handles, child safety lock, door-open indication and alarm behaviour.
Re-seal the moisture barrier completely, refit the door card and clear/check diagnostic fault codes if necessary.
Tools normally required
Plastic trim-removal tools
Torx T20 / T25 / T30 set
Appropriate XZN/triple-square bits
Ratchet, extensions and small sockets
Small pick or flat trim screwdriver
Torque wrench and vehicle repair data
Protective tape, gloves and magnetic tray
Diagnostic scan tool where needed
Butyl sealant if the moisture barrier requires resealing
Estimated fitting time and garage labour calculator
Typical estimated labour: approximately 1.5 to 2.5 hours for an experienced technician. Corroded fasteners, damaged trim clips, carrier-panel access, diagnostics or wiring repairs can increase the time.
Simple calculation: your garage hourly rate multiplied by 1.5 to 2.5 hours. This is a guide only and excludes parts, VAT where applicable, diagnostics and additional repairs.
Garage rate
1.5 hours
2.0 hours
2.5 hours
£50 per hour
£75
£100
£125
£60 per hour
£90
£120
£150
£70 per hour
£105
£140
£175
£80 per hour
£120
£160
£200
£90 per hour
£135
£180
£225
£100 per hour
£150
£200
£250
Fitting and repair service: available subject to workshop capacity and vehicle inspection. Please arrange through eBay Messages before travelling.
Condition, supply and warranty
Condition: used. Normal storage, removal and age-related cosmetic marks may be present.
Supply: exactly the latch assembly and attached components shown in the actual item photographs. No extra fixings, trim or modules are included unless pictured.
Warranty: 30-day seller warranty as stated in the listing. Installation or diagnostic labour is not included unless agreed separately.
Before fitting: compare the received part with the original before dismantling further, and retain all packaging until function and fitment are confirmed.
Delivery, international shipping and address checks
UK dispatch
Professionally packed from UK stock. Dispatch speed and service are shown in the eBay postage section.
International delivery
Available through eBay's eligible international shipping programme where the destination is offered at checkout. Countries, item eligibility, import charges and service availability are controlled by eBay and can change.
Delivery address: customers must ensure the checkout address is complete and correct before payment. We cannot manually change the address after purchase; cancellation and a new order may be required.
Collections, workshop and customer support
Collection available 7 days a week until 8pm by prior appointment, including bank holidays, subject to availability.
Do not travel without a confirmed collection appointment.
For fitment checks, collection arrangements or fitting availability, contact us through eBay Messages.
Bring your VIN and, where possible, the old part for a physical comparison.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Returns and fitment responsibility
Returns are handled in accordance with the return settings shown on this eBay listing, eBay protections and applicable consumer law. The item must be returned in the condition received, with security markings and supplied components intact where applicable.
To prevent a wrong order, do not rely on registration, model name or year alone. Compare the exact part number and photographs, or ask us to check the VIN and old-part images through eBay Messages before purchase.
VAT information
This used item is sold under the Global Accounting VAT margin scheme. VAT is not shown separately on the invoice and is not reclaimable as input tax.
25,000+ parts in stock and workshop support
Warehouse reference: organised automotive parts stock. Photo: Visitor7 / Wikimedia Commons, CC BY-SA 3.0.
Workshop reference: fitting and vehicle repairs are available subject to availability. Pexels licensed image.
THEPARTPILOT holds more than 25,000 used vehicle parts in stock at any one time. Our goal is to identify, photograph, store and dispatch the correct component efficiently while giving buyers the information needed to compare it accurately.
Supporting a small business and responsible reuse
♻ Reuse more. Waste less.
Buying a serviceable used vehicle part supports a local small business, keeps an existing component in productive use and can reduce the materials, energy and packaging associated with manufacturing a new replacement. Thank you for supporting vehicle-part recycling and our UK team.
Careful packing and dispatch
Dispatch reference: parts are packed for transport with suitable protection. Pexels licensed image.
