AUDI TT MK1 8N9 2000-2006 REAR RIGHT BUMPER GUIDE BRACKET 8N0807454
AUDI TT MK1 8N9 2000-2006 REAR RIGHT BUMPER GUIDE BRACKET 8N0807454
Audi TT Mk1 8N9 2000-2006 Rear Right Bumper Guide / Support Bracket
Buy the right factory-designed component, once. This rear-right bumper guide is a rigid moulded plastic mounting rail designed to support and align the outer edge of the rear bumper cover against the vehicle body. It is a passive structural guide: it does not electronically, hydraulically or mechanically control any driving system.
Correct mounting geometry, original attachment-point layout and vehicle-specific moulding can reduce the risk of poor bumper alignment associated with unverified low-cost copies. Across selected pre-owned stock lines, buyers may save up to 70% versus comparable new retail pricing; savings vary by part and should be checked against current new-part pricing.
Actual photographs from eBay item 147507396352. Match the shape, mounting points and any visible moulded markings against your existing part before ordering.
| Vehicle brand | Audi |
|---|---|
| Model / generation | TT Mk1 / 8N |
| Verified source chassis | 8N9 Roadster / Convertible |
| Verified source years | 2000, 2001, 2002, 2003, 2004, 2005, 2006 |
| Part | Rear bumper outer guide / support bracket / mounting rail |
| Placement | Rear Right - UK offside / driver side on right-hand-drive cars |
| Material / finish | Black moulded plastic, rib-reinforced construction |
| Manufacturer Part Number | 8N0 807 454 / 8N0807454 - verified catalogue cross-reference; the source eBay item itself currently shows its MPN field as "Does not apply" |
| Interchange Part Number | 8N0807454 formatting variant of 8N0 807 454 |
| Superseded Part Number | No confirmed superseded number verified |
| Country of origin | Germany |
| Warranty | 30 days |
| eBay Item Number | 147507396352 |
| Condition | Pre-owned factory part. Expect normal cosmetic handling / age marks consistent with prior fitment. Please inspect all high-resolution photographs. |
| VAT treatment | Global Accounting / second-hand VAT margin scheme where applicable. VAT is not separately itemised and no reclaimable VAT invoice is available. |
The outer rear bumper-cover edge and keeps it located against the rear body / quarter-panel interface.
Helps maintain the intended bumper-to-body gap and guides the bumper cover into its mounting position.
No sensors, wiring, hydraulic circuits or vehicle electronics are controlled by this bracket.
Typical symptoms of a damaged or missing guide: bumper corner sitting proud, uneven panel gap, bumper edge dropping away from the quarter panel, difficulty clipping the bumper back into position, or repeated movement after prior impact / bumper removal.
Body-style reference image: Mk1 TT Roadster. The source listing's eBay compatibility data verifies chassis 8N9 Roadster / Convertible.
VERIFIED SOURCE FITMENT: 8N9 ROADSTER
2000-2006 Audi TT 1.8 T quattro AWD variants listed in the source compatibility table. Engine-code detail appears below.
8N3 COUPE: NOT CONFIRMED BY THIS LISTING
Do not assume Coupe fitment from appearance. Match the exact old bracket number / moulding and mounting points before ordering.
NO 5-DOOR MK1 TT VARIANT
The correct Mk1 TT body distinction is Coupe 8N3 versus Roadster 8N9, not 3-door versus 5-door. This listing is built around the verified 8N9 data.
| Year | Model | Body / Chassis | Drive / Type | Engine Group 1 | Engine Group 2 |
|---|---|---|---|---|---|
| 2000 | Audi TT | Roadster 8N9 | 1.8 T quattro AWD | 1781cc 132kW 180HP - AJQ / ARY / AUQ | 1781cc 168kW 228HP - AMU / BEA |
| 2001 | Audi TT | Roadster 8N9 | 1.8 T quattro AWD | 1781cc 132kW 180HP - AJQ / ARY / AUQ | 1781cc 168kW 228HP - AMU / BEA |
| 2002 | Audi TT | Roadster 8N9 | 1.8 T quattro AWD | 1781cc 132kW 180HP - AJQ / ARY / AUQ | 1781cc 168kW 228HP - AMU / BEA |
| 2003 | Audi TT | Roadster 8N9 | 1.8 T quattro AWD | 1781cc 132kW 180HP - AJQ / ARY / AUQ | 1781cc 168kW 228HP - AMU / BEA |
| 2004 | Audi TT | Roadster 8N9 | 1.8 T quattro AWD | 1781cc 132kW 180HP - AJQ / ARY / AUQ | 1781cc 168kW 228HP - AMU / BEA |
| 2005 | Audi TT | Roadster 8N9 | 1.8 T quattro AWD | 1781cc 132kW 180HP - AJQ / ARY / AUQ | 1781cc 168kW 228HP - AMU / BEA |
| 2006 | Audi TT | Roadster 8N9 | 1.8 T quattro AWD | 1781cc 132kW 180HP - AJQ / ARY / AUQ | 1781cc 168kW 228HP - AMU / BEA |
Rear-left / nearside position. This item is rear-right. Also do not use for later Audi TT Mk2 / 8J applications, which use different 8J-family bumper-guide references.
TT Mk1 Coupe 8N3, front-wheel-drive variants, 3.2 V6 variants, or model year 1999. These may look similar, but this listing's verified compatibility data does not cover them.
Secure HTTPS technical-photo placeholder. Replace with your own workshop image showing the bracket attached behind the rear-right outer bumper-cover edge. Do not use an unverified generic chassis image to imply exact mounting geometry.
Suggested tools
- Trim-removal lever set
- Torx bit set suitable for the fasteners present on your vehicle
- Metric socket set, ratchet and short extension
- Small screwdriver / pick for clips where required
- Protective masking tape for painted bumper edges
- Torque information / workshop data appropriate to your exact variant
Indicative fitting sequence
- Park securely, isolate the ignition and protect painted edges around the rear bumper.
- Remove the rear bumper-cover fasteners and arch / lower fixings necessary to release the right-hand bumper corner. Follow variant-specific workshop information.
- Support the bumper cover and release it carefully from the side guide without twisting the plastic.
- Remove the damaged rear-right guide / bracket from the body mounting points.
- Compare old and replacement parts side-by-side: number, curvature, holes, tabs and orientation must match.
- Install the replacement guide squarely to the original mounting points. Tighten only to the correct workshop specification for the fastener / body location.
- Refit the bumper cover, engaging the outer edge evenly into the guide. Check panel gap and corner alignment before final tightening.
- Recheck all fasteners, trim clips, lamps / sensors disturbed during bumper removal, and confirm the bumper is secure.
| Planning Time | £40 / hr | £60 / hr | £80 / hr | £100 / hr |
|---|---|---|---|---|
| 1.0 hour | £40 | £60 | £80 | £100 |
Illustrative labour only; excludes VAT where applicable, clips, consumables, diagnosis, body repair and any additional work. Professional fitting may also be available at our repair facility, subject to availability. Please use eBay Messages to ask about fitting before purchase.
Professional fitting may be available directly at our repair facility, subject to workshop capacity and vehicle condition. Ask through eBay Messages before purchase so availability and the exact work required can be confirmed within eBay's communication system.
Postage is not free. Buyers pay the delivery fee shown / calculated by eBay at checkout for the selected destination and service.
International shipping: eligible orders can be sent using eBay's managed international-shipping service - Global Shipping Programme or eBay International Shipping depending on current account migration, destination and item eligibility. Typical supported regions can include the UK, Europe, USA, Australia, Canada and many other eligible markets.
Items are packed to protect mounting tabs, corners and moulded edges. International availability, import charges and destination rules are controlled by the eBay programme and may vary by country.
30-day returns apply in line with the listing terms. Please verify the part before installation. A part returned in the same condition in which it was received is handled under the applicable eBay return process and consumer rights.
To avoid returns, compare the exact 8N0 807 454 reference, right-hand orientation, mounting holes, rib pattern and photographs with the part removed from your vehicle before ordering.
Audi TT Mk18N9 Roadster2000-2006Rear Right8N0807454
Overall curvature, length, screw holes, end tabs, moulded ribs, attachment points and any readable moulded number on your old bracket.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.