Actual Complete Door Photographs

These are photographs of the actual complete door offered for sale. Please enlarge and inspect every photograph before ordering.

THEPARTPILOT

Actual complete front-left passenger door exterior. Frameless glass and exterior handle are fitted.

THEPARTPILOT

Rear exterior view of the actual long E92 coupé door. Exterior mirror is not supplied.

THEPARTPILOT

Interior view showing the glass, black door card, silver-colour trim, handle and visible wiring.

THEPARTPILOT

Close interior view. Compare the door card, trim design, switch and speaker area.

THEPARTPILOT

Full interior trim view of the actual complete door assembly.

THEPARTPILOT

Close-up of cosmetic marks. Bodywork preparation, polishing or painting may be required.

THEPARTPILOT

Full side profile showing the correct long two-door E92 coupé door shape.

THEPARTPILOT

Further close-up of the used condition and stock marking.

Full Product Description

BMW 320D M Sport E92 Coupé complete front-left passenger-side door assembly.

This is a complete used door removed from a 2007 BMW 3 Series 320D M Sport E92 two-door coupé. It fits the front-left side of a UK right-hand-drive vehicle, also described as the nearside or passenger side.

The item is supplied complete as shown in the actual listing photographs. The photographs show the metal door structure, frameless window glass, black interior door card, silver-colour trim, exterior handle, interior release handle, window switch area, wiring and other attached parts.

The exterior wing mirror is not supplied. Buyers should not assume that hidden modules, speakers, locking parts, wiring or mechanisms have a particular specification unless they are clearly shown and matched against the original vehicle.

Part Specification

Correct Vehicle Body and Door Location

The correct vehicle is a BMW 3 Series E92 M Sport two-door coupé. The required door is the long front-left door behind the front-left wing. On a UK right-hand-drive vehicle, this is the passenger-side door.

BODY REFERENCE: BMW E92 M Sport two-door coupé. This side profile shows the correct long coupé door shape.

LOCATION REFERENCE: The complete door fits the front-left passenger position on a UK right-hand-drive E92 coupé.

Reference vehicle photographs only. They do not show the donor vehicle or the item for sale. Images credited to nakhon100, CC BY 2.0, through Wikimedia Commons.

Confirmed Compatibility

Other E92 models

Other BMW E92 coupé versions may use the same basic front-left door structure, but this complete assembly is not advertised as a confirmed plug-and-play fit for another engine or trim without a VIN and equipment comparison. Buyers of 318i, 320i, 325i, 325d, 330i, 330d, 335i, 335d or M3 vehicles must verify every attached component before purchase.

Vehicles and Positions This Complete Door Will Not Fit

Part Number Information

How to Confirm Fitment Before Ordering

1. Confirm that your car is a BMW 3 Series E92 two-door coupé.
2. Confirm that the required part is the front-left UK passenger-side door.
3. Compare the long frameless door shape and glass profile with the photographs.
4. Compare the black interior door card and silver-colour trim.
5. Compare the interior handle, window switch position and speaker area.
6. Compare the main electrical connector and terminal layout where accessible.
7. Check whether your vehicle has comfort access, upgraded audio, door lighting, alarm equipment or another option package.
8. Confirm whether your original mirror, lock barrel, module, wiring or trim must be transferred.
9. Do not rely only on registration year, engine size or exterior colour.
10. When uncertain, send the full VIN, registration and photographs of the original door through eBay Messages before purchase.

Where the Door Is Fitted and What It Controls

This complete door mounts to the front-left A-pillar hinge area and closes against the body-side latch. It provides passenger access, weather sealing, window support, locking operation and part of the vehicle’s exterior side structure.

• Front passenger entry and exit
• Door latch and central locking operation
• Exterior and interior release handles
• Frameless window glass movement and alignment
• Window switch and associated wiring
• Interior trim and speaker mounting area
• Weather sealing and water management
• Exterior mirror mounting point
• Correct body panel gap between the wing and rear quarter

Common Symptoms and Reasons for Changing the Door

Benefits of Buying a Used Original Factory Part

• Manufactured to the original vehicle’s hinge, latch and body-aperture dimensions.
• Correct factory pressing, reinforcement and mounting locations.
• Often provides better panel alignment than a low-cost pattern panel.
• Supplied with useful fitted components shown in the photographs.
• Can cost substantially less than a new dealer-supplied assembly.
• Depending on the part and current new retail price, used-part savings can sometimes reach approximately 70%.
• Reusing an existing door reduces demand for new raw materials, manufacturing energy and unnecessary waste.

Required Tools

General Fitting Instructions

1. Compare the original door and the supplied assembly before dismantling.
2. Record the existing panel gaps and glass alignment.
3. Follow the correct battery-disconnection procedure for the vehicle.
4. Protect the front wing, sill and surrounding paintwork.
5. Support the original door using a padded door stand or suitable lifting equipment.
6. Disconnect the door-to-body electrical connector.
7. Release the door check strap and mark the original hinge positions.
8. With a second person supporting the weight, remove the hinge fasteners.
9. Transfer the mirror and any vehicle-specific lock, module, loom or trim components required.
10. Mount the complete door and set the height and panel gaps.
11. Tighten all fasteners to the correct BMW workshop specification.
12. Reconnect the wiring and test the lock, handle, glass, window switch and speaker operation.
13. Initialise the frameless-window function where required.
14. Check the glass drop, rise, weather seals, wind noise and water sealing.

Estimated Repair Time and Labour Cost

Estimated workshop time for a straightforward complete-door change, alignment and testing is approximately 2–4 labour hours.

Allow additional time where the mirror, lock, wiring, door module, glass mechanism, trim or other vehicle-specific parts must be transferred. Painting and body preparation are additional.

Labour estimate = garage hourly rate × labour hours

Professional Fitting Service

A professional fitting service may be available subject to workshop capacity, vehicle condition and prior arrangement. Please enquire through eBay Messages before purchasing or travelling.

Postage, Collection and Dispatch

Tracked next-working-day dispatch is offered for qualifying orders placed before 3pm, subject to courier collection times and the preparation required for oversized body panels.

International postage cost, import charges, eligible countries and estimated delivery dates are calculated and displayed by eBay at checkout.

Collection is available seven days a week, including bank holidays, until 8pm by prior appointment arranged through eBay Messages.

Warranty and Returns

This used part is supplied with a 3-month parts warranty. The warranty applies to the supplied part and does not cover labour, diagnostics, paint, programming, transport or related components.

Buyers must complete the fitment checks in this description before installation. When uncertain, contact us through eBay Messages with the full VIN, registration and photographs of the original part.

The exact door and every supplied component must be returned securely in the same condition in which it was received.

Where permitted by eBay, a refund deduction of up to 50% may apply only when fitting, alteration, missing components, avoidable damage or poor return packaging has caused a genuine loss in value. There is no automatic deduction based only on the return reason selected.

VAT Information

Why Buy from ThePartPilot?

Support a Local Small Business and Help the Environment

Thank you for supporting an independent automotive-parts business. Every suitable used part returned to service helps extend the life of an existing vehicle and reduces the need to manufacture a new component.

♻️ Reusing vehicle parts conserves materials
🌍 Reduces unnecessary manufacturing and waste
🚗 Helps keep repairable vehicles on the road
📦 Supports skilled local jobs and an independent UK business

Choosing a correctly identified used factory part can be both a cost-effective and environmentally responsible alternative to buying new.