Chevrolet Captiva C100 06-11 Glovebox Dashboard Trim Moulding 96436515
Chevrolet Captiva C100 06-11 Glovebox Dashboard Trim Moulding 96436515
Actual Item Photographs
Correct Vehicle Generation
Reference vehicle: first-generation Chevrolet Captiva C100 five-door SUV. The photograph identifies the vehicle generation only and is not the donor vehicle.
Vehicle reference image: Wikimedia Commons. Used to illustrate the relevant first-generation five-door Captiva body style.
Product Details
| Manufacturer | Chevrolet / GM original-manufacturer component |
| Part number | 96436515 |
| Part type | Dashboard / glovebox decorative moulding trim |
| Position | Front passenger-side dashboard, around or above the glovebox area |
| Vehicle orientation | Right-hand-drive vehicle |
| Material | Textured moulded automotive interior plastic |
| Colour | Dark grey — compare the photographs with your existing trim |
| Condition | Used; normal age-related cosmetic wear may be present |
| Electrical function | None — this is a decorative/protective interior finishing component |
Compatibility and Fitment Chart
| Vehicle | Generation | Years | Body / steering | Requirement |
|---|---|---|---|---|
| Chevrolet Captiva | C100 / first generation, pre-facelift dashboard | 2006–2011 | 5-door SUV, right-hand drive | Must carry or cross-reference to 96436515 |
This Part Must Not Be Purchased for the Following Without Further Verification
- Chevrolet Captiva C140 facelift vehicles with a different dashboard design.
- Later-generation Captiva models.
- Left-hand-drive Captiva dashboards.
- Vauxhall/Opel Antara unless the installed part independently matches 96436515.
- Any vehicle with different mounting clips, length, colour, grain or profile.
- Vehicles selected only by registration lookup where the physical part does not match.
Five Checks Before Ordering
Locate the number on the back of your original trim and match 96436515.
Compare the complete length, contour and ends of the moulding.
Compare every locating peg, clip position and mounting tab.
Interior grey shades and surface grains can vary between specifications.
This listing is intended for the passenger side of a right-hand-drive vehicle.
Where It Fits and What It Does
This moulding is installed on the front passenger side of the dashboard in the glovebox area. It finishes the visible dashboard surface, conceals joints and fixing points, and helps the interior retain its factory appearance.
Common reasons for replacement
- Cracked or split trim following impact or removal.
- Broken locating clips causing movement or poor alignment.
- Visible gaps between the trim and dashboard.
- Rattling or vibration from a loose moulding.
- Heavy scratches, discolouration or previous adhesive damage.
- Missing trim after glovebox or dashboard repair work.
This component does not control an electrical system. Replacement restores the appearance and secure finish of the dashboard and can eliminate rattles caused by damaged mounting points.
Why Choose a Used Original-Manufacturer Component?
Designed around the original dashboard dimensions, contours and mounting positions.
Original surface texture and styling generally match the surrounding factory trim more closely than a low-cost reproduction.
A used component may offer substantial savings compared with purchasing an equivalent new dealer-supplied component.
Depending on the component and current new-part price, purchasing used can sometimes save up to 70%. This is a general potential saving rather than a guaranteed comparison for every individual part.
General Fitting Guide
Suggested tools
- Plastic interior trim-removal tools
- Small flat plastic pry tool
- Torx or screwdriver set if adjacent panels require removal
- Protective cloth or masking tape
- Inspection light
Installation sequence
- Switch off the ignition and remove the key.
- Protect the surrounding dashboard surfaces with a clean cloth.
- Inspect the replacement trim to identify each clip and locating peg.
- Starting at an accessible end, release the old trim using a plastic removal tool.
- Work gradually along the moulding; do not bend or twist the dashboard panel.
- Remove any broken clip fragments remaining in the dashboard.
- Compare the removed component directly with the replacement.
- Align all locating points before applying pressure.
- Press evenly along the trim until every clip is correctly seated.
- Check alignment, glovebox operation and surrounding panel gaps.
Estimated workshop time: approximately 0.25–0.50 labour hours, depending on access, clip condition and whether surrounding panels require removal.
Garage Labour Cost Estimator
Active calculators require JavaScript and are not permitted in an eBay description. Use the static table below. Estimated labour cost equals the garage hourly rate multiplied by 0.25–0.50 hours.
| Garage rate | 15 minutes / 0.25 hr | 30 minutes / 0.50 hr |
|---|---|---|
| £50 per hour | £12.50 | £25.00 |
| £75 per hour | £18.75 | £37.50 |
| £100 per hour | £25.00 | £50.00 |
| £125 per hour | £31.25 | £62.50 |
We may also offer fitting and vehicle-repair services, subject to workshop availability. Contact us through eBay Messages before travelling.
Fitting and Repair Support
Workshop image is illustrative. Fitting and repairs are subject to appointment, technician availability and prior confirmation through eBay.
More Than 25,000 Parts in Stock
ThePartPilot carries more than 25,000 used vehicle components on the shelf at any one time. Our stock includes interior trim, electrical modules, switches, engine components, body panels, lighting and many other vehicle parts.
Seven days a week until 8pm by prior appointment, including bank holidays.
Eligible international orders are handled through eBay's available international shipping programme at checkout.
We also purchase suitable vehicles for cash, with nationwide collection and same-day payment subject to inspection and agreement.
Delivery and Address Information
- Orders are dispatched to the address selected during eBay checkout.
- Customers must check the full delivery address and postcode before paying.
- We cannot manually redirect an order to a different address after checkout.
- International availability, charges, customs and destination eligibility are shown by eBay at checkout.
- Oversized, restricted or destination-excluded components may not qualify for international delivery.
- How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Returns and Fitment Responsibility
Buyers are responsible for checking part number, shape, mounting points, dashboard version, colour and vehicle configuration before purchase. Registration-based compatibility information should be treated as a guide where model changes overlap.
Returns are handled according to the return terms displayed by eBay and the buyer's applicable statutory rights. An eligible deduction may be made where eBay permits it and a returned item has suffered a demonstrable loss in value because it has been damaged, incompletely returned, fitted carelessly or returned in a materially different condition. No deduction overrides an eligible buyer's legal rights or the eBay Money Back Guarantee.
Sold under the applicable Global VAT/margin accounting arrangement stated by the seller. VAT is not separately charged or shown as a reclaimable amount on this item.
Support a Small Business and Reuse Quality Parts
Purchasing a serviceable used vehicle component supports an independent automotive business while extending the useful life of an existing part. Reuse can reduce demand for new raw materials, manufacturing and unnecessary disposal. Thank you for helping keep usable automotive components in circulation.
Carefully Prepared for Dispatch
Components are checked against the listing, packed appropriately for their size and prepared for collection by the selected delivery service. Image is illustrative.