FIAT 500 312 2007-2015 RHD PASSENGER DASH GLOVE BOX CUBBY 735446265
FIAT 500 312 2007-2015 RHD PASSENGER DASH GLOVE BOX CUBBY 735446265
FIAT 500 TYPE 312 PASSENGER DASH GLOVE BOX CUBBY
Fitment-first listing prepared to help you compare the exact shape, mounting points and part number before ordering.
|
99.6% POSITIVE |
25,000+ PARTS Stocked on the shelf |
TRACKED DISPATCH Carefully packed |
FITMENT SUPPORT Message us through eBay |
Registration year alone does not prove fitment. Compare the actual photographs first, then match 735446265, the open-cubby shape, outer lip, fixing holes and mould mark C528. The donor year is not used as the sole fitment test.
ACTUAL ITEM PHOTOGRAPHS
The photographs below show the used part supplied. Please enlarge and inspect the surface, edges, fixing holes and moulding before purchase.
THEPARTPILOT
|
THEPARTPILOT
|
THEPARTPILOT
|
THEPARTPILOT
|
CORRECT VEHICLE & FITTING LOCATION
BODY-STYLE REFERENCE
|
UK RIGHT-HAND DRIVE LOCATION GUIDE
WINDSCREEN / DASHBOARD
Position: lower passenger-side dashboard, on the left side of a UK right-hand-drive Fiat 500 Type 312. |
Vehicle image is a body-style reference only; colour and trim vary. Image credit: Ad Meskens, CC BY-SA 3.0, via Wikimedia Commons.
PART SPECIFICATION
| Specification | Verified detail |
|---|---|
| Part type | Passenger dashboard open storage cubby / glove-box compartment insert |
| Part number | 735446265 — listing cross-reference; match against your original part or a VIN-based catalogue |
| Visible mould mark | C528, visible in the actual photographs |
| Material marking | PP-MD10 — mineral-filled polypropylene moulding |
| Colour / finish | Black / dark charcoal textured dashboard plastic |
| Vehicle orientation | UK right-hand drive; front passenger side / left side |
| Electrical content | None visible; this is a moulded storage and dashboard-trim component |
| Condition | Used. Age-related marks may be present. The photographs show the supplied item. |
EXACT FITMENT TABLE
| Make / model | Years | Body / steering | Fitment requirement |
|---|---|---|---|
| Fiat 500 Type 312 | 2007–2015 | 3-door hatchback, UK RHD | Must have the same open passenger-side cubby; match 735446265, C528, lip and fixing points |
| Abarth 500 Type 312 | 2008–2015 | 3-door hatchback, UK RHD | Only where the original compartment is the identical open-cubby design and number/shape matches |
| Some later Type 312 cars | 2016 onward | Configuration varies | Do not order by year alone. Buy only after matching 735446265 and every visible feature, or after fitment verification through eBay Messages. |
Engine note: engine size does not establish compatibility for this interior trim. Dashboard specification, steering orientation, part number and physical moulding are the deciding factors.
THIS PART WILL NOT FIT
- Left-hand-drive vehicles.
- Fiat 500L, Fiat 500X or New 500 electric / Type 332.
- Fiat Panda, Punto or other models merely because they share an engine.
- A closed-lid or different-style glove-box assembly unless your original inner compartment and all mountings match exactly.
- Any vehicle with a different part number, mounting pattern, outer profile or dashboard opening.
HOW TO CONFIRM FITMENT BEFORE BUYING
- Use the photographs first: compare the front opening, curved outer lip, compartment depth and every fixing hole.
- Check your existing component or a VIN-based parts catalogue for 735446265.
- Confirm the vehicle is a Fiat 500 / Abarth 500 Type 312, 3-door, UK RHD.
- Check the passenger side is the left side and that your dashboard uses this open-cubby design.
- Compare the mould mark C528 where visible. Mould codes support identification but do not replace the main part-number and shape check.
- Still unsure? Send your registration or VIN and a clear photo of the original part through eBay Messages before purchase.
WHAT IT DOES & WHY REPLACE IT
This moulded compartment sits in the lower passenger side of the dashboard. It provides accessible storage and forms part of the visible dashboard finish. It does not control an electronic or mechanical system, but damaged fixings can allow the trim to move or rattle.
| Common symptom | Why replacement helps |
|---|---|
| Cracked, split or heavily marked compartment | Restores the dashboard appearance and usable storage space |
| Broken tabs or enlarged fixing holes | A sound replacement can sit securely and reduce movement |
| Loose trim, vibration or rattling | Correctly matched factory mounting points help retain the panel properly |
| Missing compartment | Completes the lower dashboard and protects the opening behind it |
WHY CHOOSE A USED FACTORY PART?
A factory-produced used component is moulded for the vehicle's original dashboard profile, fixing locations, texture and rigidity. This can avoid the trimming, forcing, poor alignment or mismatched finish sometimes encountered with low-cost copies. Used parts can also cost substantially less than buying new—sometimes up to 70% less, depending on new-part price, condition and availability. Savings are not guaranteed.
FITTING GUIDE
Estimated repair time: approximately 20–45 minutes for an experienced technician; allow 45–90 minutes for a careful first-time DIY installation. Vehicle trim specification and seized/missing fixings can change the time.
Suggested tools: plastic trim-removal tools, Torx T20/T25 bits, Phillips screwdriver, small ratchet with 8 mm and 10 mm sockets, extension bar, torch and magnetic parts tray.
- Park safely, switch the ignition off and remove the key.
- Move the passenger seat back and protect nearby dashboard trim.
- Inspect the old compartment and locate every visible screw, clip and lower-trim fixing. Do not force the panel.
- Remove the necessary lower trim and fasteners using the correct bit.
- Support the compartment while releasing the final clips and pull it straight out.
- Compare the old and replacement parts side by side. Transfer reusable clips or fixings where required.
- Align the locating points, press the panel evenly into position and refit all fasteners.
- Tighten only until secure—over-tightening can crack plastic or strip the mounting point.
- Check the panel is flush, secure and free from rattles.
STATIC GARAGE LABOUR CALCULATOR
No JavaScript is used. Estimated labour is calculated as hourly rate × 0.5 hour, based on a typical 30-minute installation. Diagnostic work, damaged fixings and extra trim removal are additional.
| Garage rate | 0.5-hour estimate | 1-hour upper allowance |
|---|---|---|
| £40/hour | £20 | £40 |
| £60/hour | £30 | £60 |
| £80/hour | £40 | £80 |
| £100/hour | £50 | £100 |
| £120/hour | £60 | £120 |
FITTING SERVICE — SUBJECT TO AVAILABILITY
GARAGE SERVICE
|
Prefer professional installation?Fitting may be available by appointment, subject to workshop capacity and vehicle inspection. Use eBay Messages before travelling so availability, labour and any additional work can be confirmed. Collection: available by appointment. Request directions through eBay Messages after confirming the order or collection arrangement. |
Garage reference image credit: Nenad Stojković, CC BY 2.0, via Wikimedia Commons.
DELIVERY, ADDRESS & INTERNATIONAL ORDERS
- Postage service, price and estimated delivery date are shown by eBay at checkout.
- Eligible international destinations are determined by eBay's international shipping programme at checkout. Import charges and availability vary by destination and item.
- Tracked dispatch is used where shown in the listing. Orders placed before the stated cut-off are processed as quickly as possible.
- Check your delivery address before payment. The address cannot be manually changed after checkout. A cancellation and new order may be required.
- Large or fragile parts may use a different courier or collection service.
WAREHOUSE STOCK & CAREFUL DISPATCH
25,000+ PARTS STOCKED
|
PACKED FOR DISPATCH
|
Warehouse image: CC0. Dispatch image: R. L. Sheehan, public domain. Both via Wikimedia Commons. Images illustrate stock and dispatch processes and are not photographs of this seller's premises.
WARRANTY, RETURNS & TAX INFORMATION
Seller warranty: 30 days, matching the current item-specific warranty. Any revised warranty should also be updated in the eBay item specifics.
Returns: use the eBay return process and return the item complete and in the same condition in which it was supplied. Buyers should complete the fitment checks above before purchase. Nothing in this description limits eBay Money Back Guarantee rights or statutory consumer rights.
Global Accounting Scheme: no separately itemised or reclaimable VAT is shown on this used item. Tax treatment follows the invoice and eBay checkout.
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
SUPPORT A LOCAL SMALL BUSINESS ♻️
Buying a quality used vehicle part supports a local independent business while extending the useful life of an existing component. Reusing serviceable parts can reduce waste, packaging and demand for newly manufactured replacements. Thank you for helping keep usable car parts in circulation. 🚗🔧📦🌍
COMPARE THE PHOTO • MATCH THE NUMBER • BUY THE CORRECT PART FIRST TIME
For fitment help, fitting enquiries or collection directions, contact us only through eBay Messages.
THEPARTPILOT text watermark is included for listing-brand protection. Vehicle and service images are reference images; the four product photographs show the actual supplied part.