FIAT 500 / 500C ABS PUMP & CONTROL MODULE

Used original-equipment specification Bosch ABS hydraulic pump / electronic control assembly. Please match the numbers printed on your existing unit before ordering.

Do not order using registration, model year or vehicle shape alone. ABS pumps can differ according to engine, braking system, ESP configuration and vehicle specification.

The safest check is to compare the numbers physically printed on the ABS assembly removed from your vehicle.

Unsure? Request a fitment check through eBay Messages before ordering. VIN verification is strongly recommended.

🔧 PART DETAILS

🚗 VERIFIED APPLICATION GUIDE

The following applications have documented use of the 51880815 / 0265232840 part family. This is an application guide — the number on the customer's existing ABS assembly remains the primary check.

❌ DO NOT BUY THIS UNIT IF...

• Your existing ABS pump carries a different Bosch hydraulic-unit number unless compatibility has first been confirmed.
• Your electrical connector or hydraulic pipe arrangement differs from the pictured item.
• Your vehicle uses a different ABS/ESP specification.
• You are relying only on the registration year or eBay compatibility checker.
• You have not compared the physical unit and identification numbers.

Similar-looking ABS pumps are not necessarily interchangeable.

🛑 WHAT DOES THE ABS PUMP DO?

The ABS hydraulic modulator forms part of the vehicle's anti-lock braking system. Working with wheel-speed sensors and the electronic control system, it regulates hydraulic brake pressure during conditions in which wheel lock is detected.

By rapidly controlling pressure to individual brake circuits, the system is designed to help retain directional control under heavy braking. Depending on vehicle specification, the assembly may also interact with traction and stability-control functions.

Because this is a safety-critical braking component, correct identification, installation, bleeding and diagnostic procedures are essential.

⚠️ POSSIBLE ABS UNIT FAULT SYMPTOMS

• ABS warning lamp illuminated
• Traction/stability warning lamp where equipped
• Diagnostic communication faults with the ABS controller
• ABS pump motor running unexpectedly or continuously
• Pump motor or hydraulic pressure fault codes
• Wheel-speed related faults after sensor/wiring faults have been excluded
• Loss of ABS intervention
• Stored CAN communication faults

These symptoms can also be caused by sensors, wiring, power supply, hydraulic faults or other components. A professional diagnostic scan should be performed before replacing an ABS assembly.

★ WHY CHOOSE AN ORIGINAL-EQUIPMENT USED PART?

A quality used original-equipment component gives you the opportunity to replace a failed component with a part manufactured to the specification used on the vehicle rather than choosing an unknown low-cost reproduction.

Correctly identified used components can offer substantial savings against purchasing an equivalent new replacement. Depending on the component and current new-part price, savings on recycled automotive parts can be significant — in some cases up to approximately 70%.

The key advantage is not simply price: matching the manufacturer's identification numbers, connector configuration and vehicle specification helps reduce incorrect orders and unnecessary returns.

🔩 FITTING INFORMATION

Typical tools/equipment required

• Suitable socket and ratchet set
• Brake pipe / flare-nut spanners
• Torque wrench
• Brake-fluid handling equipment
• Pressure or diagnostic bleeding equipment where required
• Compatible diagnostic scan tool
• Protective gloves and eye protection
• Correct specification brake fluid

Typical procedure overview

1. Confirm the replacement unit's numbers against the original unit and VIN.
2. Follow the manufacturer's battery-disconnection procedure.
3. Gain safe access to the ABS hydraulic assembly.
4. Protect surrounding components from brake-fluid contamination.
5. Identify and carefully disconnect the electrical connector.
6. Identify each hydraulic brake line before removal.
7. Disconnect hydraulic pipes using the correct flare-nut tooling.
8. Remove the mounting hardware and original assembly.
9. Install the replacement unit and tighten all connections to manufacturer specifications.
10. Refill and bleed the braking system using the correct procedure.
11. Use diagnostic equipment where an ABS actuator bleed procedure is required.
12. Carry out any coding/configuration required for the vehicle.
13. Clear fault codes, inspect for fluid leaks and verify brake operation before road use.

Estimated workshop time: approximately 1.5–3.0 hours is a reasonable planning allowance, but actual labour time depends on diagnosis, corrosion, access, bleeding and any coding/configuration required.

💷 GARAGE LABOUR ESTIMATOR

No JavaScript or active content is used. Find your garage's hourly rate below and compare the estimated labour range.

Estimates are illustrative labour calculations only and exclude diagnosis, fluids, consumables, coding and additional repairs.

THEPARTPILOT can also offer fitting and repair services subject to workshop availability and prior arrangement.

Please use eBay's permitted communication facilities for enquiries relating to your purchase.

📦 25,000+ PARTS IN STOCK

THEPARTPILOT carries more than 25,000 automotive parts in stock and on the shelf at any one time.

Our extensive recycled-parts inventory helps motorists, garages and repairers source replacement components while keeping usable automotive components in circulation.

WhatsApp QR for Fitment Help / Appointment Enquiries

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.

For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.

🌍 INTERNATIONAL DELIVERY

International shipping is available through eBay's supported international shipping programme where the item and destination are eligible.

Destination availability is controlled by eBay and may change. The countries shown as available at checkout for this listing take precedence.

📍 IMPORTANT DELIVERY ADDRESS NOTICE

Please check your delivery address carefully BEFORE completing checkout.

Orders must be dispatched using the address supplied through the eBay transaction. We cannot manually change the delivery address after checkout. If the address is incorrect, follow the options provided through eBay.

↩️ RETURNS & CORRECT PART SELECTION

We provide detailed part-number and compatibility information specifically to help customers order correctly first time.

Please compare the photographs, connector, hydraulic layout and identification numbers before fitting the part. If uncertain, request a compatibility check before purchase.

Returned items must be returned in accordance with the listing's eBay return policy and in the condition required by eBay. Where an eligible returned item has been installed, altered, damaged or otherwise returned in a condition that causes loss of value, any permissible refund adjustment will be handled strictly in accordance with eBay's applicable return and seller-protection rules.

There is no automatic restocking deduction simply because a buyer makes a return.

Used parts are supplied under the applicable margin scheme where relevant. VAT is not separately shown or reclaimable on margin-scheme goods.

THEPARTPILOT also purchases vehicles for recycling, with nationwide collection and same-day payment services available subject to assessment and arrangement.

♻️ SUPPORT REUSE • SUPPORT SMALL BUSINESS

Thank you for supporting an independent automotive parts business. Purchasing a correctly selected recycled vehicle component can extend the useful life of an existing part and reduce the demand for unnecessary replacement manufacturing.

Reusing serviceable automotive components also helps reduce material waste and keeps valuable metal, electronics and engineered components in productive use for longer. 🌍♻️🚗

Better identification. Fewer incorrect orders. More parts reused.

📦 CAREFULLY PACKED FOR DISPATCH

Parts are prepared and packaged for transport with the aim of protecting connectors, mounting points and vulnerable components throughout delivery.