Ford B-Max MK1 JK 2012-2017 Right Rear Sliding Door Outer Handle O/S Blue
This listing is for the RIGHT REAR EXTERIOR HANDLE / CARRIER ASSEMBLY fitted to the rear sliding door of a Ford B-Max. Vehicle application range is Ford B-Max JK, 2012-2017. Exact engineering-number revision must still be matched to your original part or verified from your VIN before purchase if there is any uncertainty.
📸 Actual Item Photographs
These are photographs of the actual used part offered for sale. Please compare the handle shape, carrier, mounting points, lever mechanism and colour with the part currently fitted to your vehicle.
🚙 Where Does This Part Fit?
Ford B-Max 5-Door MPV
The handle is mounted externally on the vehicle's right-hand rear sliding door. On a UK right-hand-drive B-Max this is normally referred to as the O/S rear sliding door.
The exterior pull handle mechanically operates the release linkage within the sliding door. Pulling the handle transfers movement through the carrier / lever mechanism toward the door release system so the sliding door can be opened from outside.
✅ Vehicle Compatibility Chart
The chart below identifies the correct Ford B-Max vehicle family and production years. Because Ford used engineering revisions, your original handle number / VIN remains the final check for an exact replacement.
| Make | Model / Platform | Year | Body | Position | Status |
|---|---|---|---|---|---|
| Ford | B-Max JK | 2012 | 5-door MPV / sliding rear door | Right rear | Application family confirmed — verify exact revision |
| Ford | B-Max JK | 2013 | 5-door MPV / sliding rear door | Right rear | Application family confirmed — verify exact revision |
| Ford | B-Max JK | 2014 | 5-door MPV / sliding rear door | Right rear | Application family confirmed — verify exact revision |
| Ford | B-Max JK | 2015 | 5-door MPV / sliding rear door | Right rear | Application family confirmed — verify exact revision |
| Ford | B-Max JK | 2016 | 5-door MPV / sliding rear door | Right rear | Application family confirmed — verify exact revision |
| Ford | B-Max JK | 2017 | 5-door MPV / sliding rear door | Right rear | Application family confirmed — verify exact revision |
- Ford B-Max model years shown as 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 or 2026.
- The left / N/S rear sliding door.
- Either front door.
- The tailgate / boot lid.
- A vehicle requiring a different carrier, mounting arrangement or engineering revision.
- Fiesta, EcoSport, C-Max, S-Max or another Ford model solely because a similar-looking handle is fitted.
- Any other vehicle unless its VIN and original part number establish the same application.
Late registration warning: use the vehicle build specification rather than registration year alone. A car first registered later may have been manufactured earlier. If uncertain, contact us through eBay Messages with your VIN and clear photographs of the existing handle before ordering.
🔎 Part Number / Revision Information
The following Ford B-Max references are useful comparison references for this right-rear handle family:
AV11-R264B16-AC AV11-R264B16-AD 1921304 — associated with AD referenceThe photographs available for this item do not show a sufficiently clear moulded / stamped engineering number. Do not order solely from this reference list. Match your original component or request VIN verification.
We deliberately do not advertise unrelated vehicle applications simply because a catalogue or marketplace search returns a visually similar component. Correct fitment takes priority over gaining extra search impressions.
🧩 Construction & Included Components
The supplied assembly visibly consists of:
- Blue painted exterior pull handle / handle cap.
- Black moulded polymer mounting carrier.
- Metal internal actuation lever / pivot hardware.
- Return spring and associated mechanical linkage components visible in the photographs.
This is a used exterior body component. Expect age-related cosmetic marks, light scratches or storage marks. Study the photographs carefully. The exact Ford paint code has not been verified, so colour matching or refinishing may be necessary for a perfect cosmetic match.
⚠️ Common Symptoms of a Worn or Damaged Rear Door Handle
- Exterior handle feels loose or has excessive movement.
- Handle does not return cleanly after being pulled.
- Sliding door will not release from outside although another release method still works.
- Handle requires excessive force to operate.
- Cracked or broken carrier / mounting points.
- Visible damage to the painted pull handle or cap.
- Mechanical lever or return mechanism is damaged or disconnected.
🔧 Fitting Guide
Installation should be carried out by a competent technician if you are not experienced with vehicle door trim and latch systems. Exact fastener sizes and tightening specifications should be taken from the correct Ford workshop information for your VIN.
- Park the vehicle securely and fully open the right rear sliding door.
- Protect the painted door edge and surrounding trim with suitable masking protection.
- Remove the relevant internal trim covers and door trim panel using plastic trim tools.
- Carefully release the moisture / vapour barrier without tearing it.
- Locate the exterior handle carrier from inside the door.
- Photograph the existing linkage routing before disconnecting anything.
- Release the handle linkage / mechanical connection from the carrier.
- Remove the carrier retaining fasteners while supporting the exterior handle.
- Release and withdraw the old exterior handle / carrier assembly.
- Compare both assemblies side-by-side before installation: mounting points, carrier shape, levers and revision markings must agree.
- Install the replacement assembly and reconnect the linkage exactly as removed.
- Before refitting trim, repeatedly test exterior opening, interior opening, latching and locking.
- Re-seal the moisture barrier correctly and reinstall all trim clips and panels.
- Perform a final door-opening, closing and locking check before returning the vehicle to service.
🧰 Suggested Tools
💷 Garage Labour Cost Guide
No JavaScript is used in this listing. Estimate labour using: garage hourly rate × billed hours = estimated labour charge.
| Garage Rate | 45 Minutes | 60 Minutes | 90 Minutes |
|---|---|---|---|
| £50 / hour | £37.50 | £50.00 | £75.00 |
| £75 / hour | £56.25 | £75.00 | £112.50 |
| £100 / hour | £75.00 | £100.00 | £150.00 |
| £125 / hour | £93.75 | £125.00 | £187.50 |
Labour figures are examples only and exclude the part, diagnosis, additional repairs, consumables and any taxes charged by the chosen repairer.
Please contact us through eBay Messages before travelling or making arrangements.
🏆 Why Choose a Factory-Spec Used Part Instead of a Low-Cost Copy?
A correctly matched original-spec component was designed around the vehicle's original mounting geometry, linkage position, clearances and surrounding trim. This is particularly important on a sliding-door handle because small differences in carrier geometry or lever movement can affect how the release mechanism operates.
Reusing a serviceable used component can also provide a substantial saving compared with buying the equivalent component new. Actual saving varies according to the component, condition and current new-part price, so compare like-for-like before purchase.
🏭 THEPARTPILOT — Parts On The Shelf
For collection or fitting enquiries please use eBay Messages. Seller contact and business-location information is supplied by eBay through the appropriate Business Seller Information area.
🌍 International Delivery — eBay Global Shipping Programme
This item can be offered internationally through eBay's Global Shipping Programme where the item, destination and buyer are eligible. eBay calculates applicable international postage, customs charges, taxes and import charges at checkout.
EU destinations currently listed by eBay:
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Non-EU destinations currently listed by eBay:
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize,
Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China,
Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador,
French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland,
Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia,
Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman,
Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis,
Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland,
Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay,
USA and Vietnam.
Destination availability is ultimately controlled by eBay and can depend on item eligibility, account settings, restrictions and buyer location. The checkout result takes precedence.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
↩️ Returns & Fitment Verification
We make the application information as clear as possible to help customers order correctly the first time. If you are uncertain about fitment, please ask us to check before purchase rather than relying solely on a registration year or marketplace compatibility message.
Returns are handled through the eBay returns process, the return terms displayed on the listing and applicable consumer rights. If an item arrives faulty, damaged or materially different from its description, use the appropriate eBay return process.
send your VIN plus clear photographs of the original handle, carrier and any visible engineering / reference numbers through eBay Messages.
🧾 VAT Information
Qualifying used-part sales may be accounted for under the Global Accounting VAT margin arrangement. Where applicable, VAT is not shown separately on the sales invoice. International customs duties, import VAT and other charges applicable to Global Shipping Programme orders are calculated by eBay at checkout.
♻️ Reuse Parts • Support a Small UK Business
♻️ Choosing a serviceable used component gives an existing automotive part another useful life instead of automatically replacing it with a newly manufactured component. Reuse can reduce waste and helps make better use of parts already in circulation.
❤️ Every order also supports an independent UK automotive-parts business. Our aim is simple: provide clear identification, useful technical information and enough fitment detail to help you buy the correct component the first time.
📦 Parts are stored, selected, checked and packed for dispatch from our stocked inventory. Thank you for choosing THEPARTPILOT.