Ford Fiesta Mk7 2008-2017 Rear Wiper Arm 3/5 Door 8A61-17406-AA

Ford Fiesta Mk7 2008-2017 Rear Wiper Arm 3/5 Door 8A61-17406-AA

£13.52
Skip to product information
Ford Fiesta Mk7 2008-2017 Rear Wiper Arm 3/5 Door 8A61-17406-AA

Ford Fiesta Mk7 2008-2017 Rear Wiper Arm 3/5 Door 8A61-17406-AA

£13.52
Premium Used Vehicle Parts
THEPARTPILOT
Tested Parts • UK Stock • Worldwide eBay Delivery
THEPARTPILOT
Rear Tailgate Wiper System

Ford Fiesta Mk7 2008–2017 Rear Windscreen Wiper Arm

3-Door & 5-Door Hatchback • Part 8A61-17406-AA
IMPORTANT: Compare the part number, arm shape, spindle fitting and listing photographs with the part currently fitted to your vehicle before ordering.

Actual Item Photographs

Ford Fiesta Mk7 rear wiper arm 8A61-17406-AA actual part
Actual rear wiper arm supplied
Close view of Ford Fiesta rear wiper arm mounting and profile
Compare the shape and spindle mounting point
The item shown in the listing photographs is the item type being described. Review every photograph for condition, markings and included components.

Vehicle & Fitting-Location Reference

This arm mounts externally on the rear tailgate glass of the Ford Fiesta hatchback. It attaches to the splined rear-wiper motor spindle and sweeps the rear window when the rear-wiper switch is operated.

Ford Fiesta Mk7 five-door hatchback rear showing rear wiper location
FITTING POSITION: Rear tailgate window — outside face of the glass

Vehicle reference image: M 93, Wikimedia Commons, CC BY-SA 3.0. Used to illustrate the model and rear-wiper location only. Vehicle not included.

Part Identification

Part type Rear windscreen wiper arm
Engineering number 8A61-17406-AA
Search format 8A6117406AA
Vehicle position Rear / tailgate / rear windscreen
Body application Three-door and five-door hatchback, subject to matching part number
Approximate blade size Approximately 305–310 mm when fitted with the corresponding blade
Typical construction Moulded reinforced automotive plastic with a metal spring/tension insert
Condition Used. Expect age-related marks and cosmetic wear. Inspect photographs.

Confirmed Compatibility Chart

Compatibility is based on the visible part number and physical design. Ford may use different components within the same model year, so the number and photographs take priority over registration-based suggestions.

Make Model Years Body Requirement
Ford Fiesta Mk7 / Fiesta VI 2008–2017 3-door hatchback Must use matching arm 8A61-17406-AA and matching spindle/profile
Ford Fiesta Mk7 / Fiesta VI 2008–2017 5-door hatchback Must use matching arm 8A61-17406-AA and matching spindle/profile
Not confirmed to fit
Fiesta van variants without the same rear-glass arrangement; Ford Fiesta Mk6/earlier shapes; later Fiesta Mk8 models; saloon models; Ford Focus, B-Max, C-Max or other Ford vehicles; and any vehicle carrying a different engineering number, mounting hole, arm profile or blade connection.
Fitment-check service: Send us a clear photograph of your existing wiper arm, its mounting point and any visible number before purchase. Where available, also provide your VIN. We will compare the information, but the buyer remains responsible for completing the final compatibility check.

What This Part Does

The rear wiper arm transfers movement from the electric rear-wiper motor spindle to the wiper blade. Its spring-loading system presses the blade against the curved rear glass so rain, road spray, dirt and light debris can be cleared. Correct pressure and alignment are important for visibility through the rear window during poor weather and when reversing.

Common symptoms of a worn or damaged arm

Wiper motor moves but the arm remains stationary
Arm slips on the splined motor spindle
Blade misses sections of the glass or leaves a broad unwiped area
Weak spring pressure, excessive juddering or repeated lifting
Cracked plastic, damaged blade clip or missing spindle cover
Arm parks in the wrong position or touches the surrounding trim

Why Choose a Matching Used Ford Part?

⚙️
Correct Geometry
Designed around the original tailgate glass, sweep area and spindle position.
💷
Strong Value
A serviceable used component can cost substantially less than a new dealer part.
♻️
Reuse Before Replace
Reusing an existing component extends its useful life and reduces waste.

Cheap replacement arms can vary in spring pressure, spindle dimensions, moulding quality and blade angle. A matching used Ford-manufactured component retains the vehicle-specific shape and fitting arrangement. Savings vary by part and supplier; compare the total cost and condition before purchase.

Fitting Guide

Suggested tools

Protective gloves, masking tape, small trim tool or flat plastic lever, suitable socket and ratchet for the spindle nut, penetrating fluid where necessary, torque wrench if the manufacturer’s torque specification is available, and a dedicated wiper-arm puller for seized arms.

Installation sequence

1. Switch off the ignition and confirm the old arm is in its normal parked position.
2. Mark the original blade position on the glass using masking tape.
3. Lift the spindle-nut cover carefully without damaging it.
4. Remove the retaining nut using the correctly sized socket.
5. Rock the arm gently at its base. Use a wiper-arm puller if it is seized. Do not lever against the rear glass.
6. Clean the spindle splines and inspect them for wear or damage.
7. Position the replacement arm against the tape mark and press it squarely onto the spindle.
8. Refit and tighten the nut to the correct Ford workshop specification. Do not overtighten.
9. Refit the cover, wet the glass and test one complete sweep. Check that the blade does not contact the bodywork or travel beyond the glass.
Estimated fitting time: approximately 15–30 minutes for a straightforward replacement. A corroded or seized spindle may increase the time.

This is general guidance rather than a substitute for the Ford workshop manual. Stop if the spindle, motor or glass appears damaged. Professional fitting is recommended where you do not have the correct tools or experience.

Estimated Garage Labour Cost

eBay blocks JavaScript calculators. Use this compliant table instead: hourly rate × time in hours = estimated labour charge.

Garage hourly rate 15 minutes 30 minutes 45 minutes 1 hour
£50/hour £12.50 £25.00 £37.50 £50.00
£70/hour £17.50 £35.00 £52.50 £70.00
£90/hour £22.50 £45.00 £67.50 £90.00
£120/hour £30.00 £60.00 £90.00 £120.00
ThePartPilot may offer fitting and vehicle repair services subject to workshop availability, vehicle condition, location and prior appointment. Contact us for availability before travelling.

ThePartPilot Stock & Service

📦
25,000+ Parts

A large range of used vehicle components held in stock and ready for processing.

🔧
Fitting & Repairs

Workshop fitting and repair services may be available by prior arrangement.

🚚
Prepared Dispatch

Orders are checked, packaged and dispatched to the address supplied at checkout.

Delivery, Collection & Checkout

UK delivery: Orders are dispatched using the service shown in the eBay postage section. Delivery times are estimates and may vary.
International delivery: Available destinations are controlled by eBay’s current international shipping programme, carrier restrictions, item eligibility and the buyer’s delivery address. Enter your destination at checkout for the definitive availability, import charges and delivery estimate.
Collection: Collection may be available seven days a week until 8pm by prior appointment, including bank holidays where agreed in advance. Do not travel until the collection time has been confirmed.
Checkout address: Ensure the full delivery address is correct before paying. For account security and seller-protection reasons, we cannot redirect an order or replace the checkout address after payment.

Collection & Fitment Enquiries

Scan the QR code to contact ThePartPilot on WhatsApp. Please include the eBay item number, your vehicle registration, VIN where available, and photographs of your existing component.

WhatsApp QR code for ThePartPilot 07495 972152

Contact and collection are subject to eBay communication rules and prior confirmation.

Returns & Correct-Part Responsibility

Please complete all compatibility checks before installation. Do not rely only on eBay’s automated vehicle checker because variations can exist within the same year and model. Match the number, mounting point, arm profile and photographs.

Returns are handled according to the return terms displayed on this eBay listing, eBay’s rules and applicable consumer law. The buyer may be responsible for return postage where permitted. A deduction may be made where legally allowed if an item is returned installed, damaged, incomplete or in a condition that reduces its value. This does not affect the buyer’s statutory rights or eBay Money Back Guarantee.

Test and inspect the component before full installation. Keep all packaging and do not modify, paint, cut or dismantle the part until fitment has been confirmed.
VAT Information

Sold under the applicable margin/global VAT scheme. VAT is not separately itemised or reclaimable on this item.

We Buy Cars for Cash

Nationwide collection and same-day payment may be available, subject to vehicle checks, ownership verification, valuation and agreed terms.

🌍 ♻️ 🚗

Support a Small Business — Give a Quality Part Another Journey

Buying a serviceable used vehicle component supports an independent automotive parts business while helping useful materials remain in circulation. Reusing parts can reduce demand for new manufacturing, packaging and premature disposal. Thank you for supporting ThePartPilot and responsible automotive recycling.

THEPARTPILOT
Correct Part • Careful Packaging • Helpful Fitment Information
Manufacturer names and vehicle models are used only to identify compatibility. ThePartPilot is an independent used-parts seller and is not presented as an authorised representative of the vehicle manufacturer.
THEPARTPILOT

You may also like