Ford Focus Mk1 1998-2004 Front Left Passenger Side Inner Door Handle

Ford Focus Mk1 1998-2004 Front Left Passenger Side Inner Door Handle

£19.17
Skip to product information
Ford Focus Mk1 1998-2004 Front Left Passenger Side Inner Door Handle

Ford Focus Mk1 1998-2004 Front Left Passenger Side Inner Door Handle

£19.17
THEPARTPILOT

Ford Focus Mk1 (1998-2004) Front Left Passenger Inner Door Handle

Premium Recycled Ford Parts | Global Shipping

Vehicle Reference & Fitment

This part has been expertly removed from and is designed to fit the Ford Focus Mk1 (1998-2004) Hatchback, Saloon, and Estate models. Below is a reference image of the exact vehicle type this part belongs to, alongside the manufacturer logo confirming authenticity.

Ford Focus Mk1 Reference Vehicle
Reference Vehicle: Ford Focus Mk1 (1998-2004)
Ford Manufacturer Logo
Authentic Original Manufacturer Part

Where is this part fitted & What does it control?

This Interior Door Release Handle is located on the Front Left Passenger Side (NSR / Near Side Front for UK Right-Hand Drive vehicles, passenger door interior). It is mounted directly into the interior door card panel and attaches to the mechanical pull cable mechanism. Its primary function is to allow vehicle occupants to unlatch and open the front passenger door from inside the cabin.

Car Door Interior Handle Area
Fitment Location: Interior front passenger door trim panel.
Automotive Interior Trim Component
Context: Mechanical cabin release control for passenger door.

Part Details & Symptoms of Failure

Material & Construction: Manufactured using high-impact automotive polymer with a reinforced pull lever and color-matched finish designed to endure years of passenger use.

Common Symptoms of a Faulty Inner Handle:

  • The inner handle lever snaps, breaks off, or feels completely loose when pulled.
  • Pulling the handle does not unlatch or open the door from the inside (though exterior handle works fine).
  • Visible cracks or broken pivot pins holding the lever inside its surround housing.

The MASSIVE Benefit of Buying Original Parts vs Cheap Copies: Cheap aftermarket replacement handles often use brittle plastic that snaps easily during cold weather or fails to latch correctly onto the Ford door cable clip. Buying an original, factory-removed Ford handle ensures a 100% precise fit and long-term reliability. Best of all, you can save as much as 70% buying our premium used original parts instead of buying new from a main dealer!

Parts Compatibility Chart

Use the chart below to confirm fitment for your vehicle. Always try to verify fitment against the images provided before purchasing.

Vehicle Make & Model Years / Body Style Fitment Status
Ford Focus Mk1 (Hatchback, Saloon, Estate) 1998 - 2004 (Front Left Passenger Side) CONFIRMED FIT
Ford Focus Mk2 (Next Generation) 2004 - 2011 WILL NOT FIT
Ford Fiesta Mk5 2002 - 2008 WILL NOT FIT
CRITICAL FITMENT WARNING: Any parts returned to us under the "Doesn't Fit" or "Item Not As Described" categories due to buyer ordering errors will have a 50% restocking fee deducted. We provide extensive fitment data to prevent wrong orders. If you are unsure, send us a message with your registration/VIN and we will gladly verify it for you!

Note: Customers must ensure their checkout address is correct at the time of purchase. We cannot alter delivery addresses once checkout is complete.

Fitting Instructions & Garage Repair Estimator

Estimated Repair Time: 0.25 to 0.5 Hours (15-30 Minutes)

Required Tools: Phillips screwdriver, plastic trim removal tool, flathead screwdriver.

Brief Fitting Guide: Remove the screw hidden behind the inner door handle cup/surround and any screws along the door card perimeter if needed. Pry the inner handle surround assembly forward or outward to unclip it. Disconnect the metal hook/cable from the rear of the handle lever. Clip the replacement Ford handle onto the cable hook, position the housing back into the door card, and secure the retaining screw.

Garage Labour Cost Calculator

If you prefer a professional to handle the swap, estimate your labour costs below based on a quick standard job:

Garage Type / Hourly Rate (£) Estimated Time Total Estimated Labour Cost
Local Independent Garage (£50.00 / hr) 0.5 Hour £25.00
Specialist Ford Mechanic (£75.00 / hr) 0.5 Hour £37.50
Ford Main Dealer (£120.00 / hr) 0.5 Hour £60.00

*We also offer our own professional fitting and repair service subject to availability! Please contact us for a quote and to check dates.

Professional Mechanic Garage Repairs
Our expert workshop is available for repairs and professional part fitting.

Why Buy From ThePartPilot?

We operate a major, professional automotive dismantling and storage facility with over 25,000 parts in stock and on the shelf at any one time. Your items are stored securely, extensively checked, and prepared for immediate dispatch.

Massive Car Parts Warehouse Stock
Over 25,000 auto parts securely shelved.
Boxed Items Ready For Dispatch
Carefully boxed, labeled, and dispatched daily.

Order Collection, VAT & Shipping Information

  • Flexible Local Collection: We provide local order collection options for customers seven days a week up to 8:00 PM by prior appointment, including on bank holidays!
  • Global VAT Margin Scheme: We operate under the margin scheme. This means absolutely NO VAT is charged on top of your final purchase!
  • Worldwide eBay GSP Shipping: We proudly post worldwide through the eBay Global Shipping Programme. Included countries are the USA, Canada, Australia, France, Germany, Italy, Spain, Ireland, Japan, New Zealand, and all other GSP-supported nations.
🚗 WE BUY CARS FOR CASH! 🚗

Have a vehicle to sell, scrap, or clear off your drive? We offer Nationwide Collection & Same Day Payment. Message us right away for a fast, hassle-free valuation!
🌍 Support Local, Protect the Planet! ♻️

A huge thank you for choosing ThePartPilot! When you buy from us, you are supporting a dedicated, independent local small business that works tirelessly to keep you on the road. 🤝 Choosing high-quality recycled car parts massively cuts global carbon emissions, saves vast amounts of manufacturing energy, and keeps perfectly good components out of landfills. You are doing the world a massive favor! 🌳🚗🇬🇧

How To Find Us & Contact Support

Need to double-check a part number or book a fitting appointment? Scan the QR code below using your smartphone camera to chat with our team directly on WhatsApp!

Scan to WhatsApp ThePartPilot

WhatsApp

You may also like