Name: Ford Focus Mk2 2005-2011 N/S Left Front Side Skirt End Trim 5M51A10175AC
Brand: Ford
SKU: 206289748170
Price: 23.59 GBP
Availability: InStock

Ford Focus Mk2 2005-2011 N/S Left Front Side Skirt End Trim 5M51A10175AC

£23.59

THEPARTPILOT

USED FACTORY CAR PARTS | DETAILED FITMENT | UK STOCK

Ford Focus Mk2 2005-2011 N/S Left Front Side Skirt End Trim
5M51-A10175-AC / 1420430

ACTUAL ITEM PHOTOGRAPHED FRONT LEFT / N/S 25,000+ PARTS IN STOCK FITMENT HELP VIA EBAY MESSAGES

Important Condition Disclosure

You will receive the used trim shown in the item photographs. Please inspect every image before ordering. The part has normal age-related marks, scuffs, dirt and storage wear. The central fixing boss shows visible wear/material build-up in the close-up photographs. Fixing clips, screws and brackets are included only where clearly pictured.

This is the small front left side-skirt/sill end trim. It is not the complete side skirt, sill panel, front wing or wheel-arch liner.

Actual Item Photographs

Ford Focus Mk2 front left side skirt end trim actual used part front view

THEPARTPILOT

Actual used item - front/outer face

Ford Focus Mk2 nearside front sill moulding actual part side view

THEPARTPILOT

Actual used item - side profile and mounting shape

Ford Focus Mk2 left front side skirt trim reverse mounting points

THEPARTPILOT

Actual used item - reverse and fixing locations

Ford Focus 5M51A10175AC engineering number and PP EPDM material marking

THEPARTPILOT

Close-up - donor notes, moulded number and material marking

Reference Vehicle & Where This Part Fits

FITS LOW DOWN AT THE FRONT LEFT SILL / SIDE-SKIRT END, DIRECTLY BEHIND THE FRONT LEFT WHEEL ARCH

THEPARTPILOT REFERENCE

Reference vehicle: 2009-2010 Focus Mk2 facelift 5-door hatchback. Vehicle image is for model and location guidance only. Public-domain image by OSX.

Side identification: N/S means nearside - the vehicle's left side when seated facing forward, normally the UK passenger side.

Function: this moulded trim finishes and protects the lower front corner of the sill/rocker and side-skirt area. It helps cover body fixings, supports correct trim alignment and reduces direct exposure to road dirt, spray and small debris. It does not control an electrical or mechanical system.

Verified Part Identification

Ford Service Number 1420430

Engineering Number 5M51-A10175-AC
5M51A10175AC

Part Type Front side-skirt end trim / sill moulding / rocker extension / jack-point area cover

Position Front left / N/S / UK passenger side

Material Moulded PP+EPDM automotive thermoplastic blend, as marked on the pictured part

Finish Black textured used trim - inspect photographs for exact colour, texture and wear

Best confirmation method: compare the moulded engineering number 5M51-A10175-AC, the mounting-hole layout and the overall shape with the part removed from your vehicle. A registration lookup alone is not enough where trim level or body-kit differences exist.

Compatibility & Fitment Chart

Vehicle	Years / Generation	Body Styles	Fitment Status	Required Check
Ford Focus Mk2 / C307	2005-2008 Pre-facelift	Hatchback, Estate and Saloon applications appear in Ford compatibility data	Confirmed catalogue family for service number 1420430	Match 5M51-A10175-AC and the photographed mounting shape
Ford Focus Mk2 / C307	2008-2011 Facelift / Mk2.5	Hatchback, Estate and Saloon applications appear in Ford compatibility data; pictured donor note states 2010 5-door	Same engineering number appears in Ford compatibility information and documented facelift donor applications	Exact number and photo match mandatory before ordering
3-door Focus Mk2	Within Mk2 production range	3-door hatchback	Do not buy from year alone because the manufacturer product title does not state door count	Order only when the old part carries 5M51-A10175-AC or we verify clear photographs through eBay Messages

The reference vehicle shown is a 5-door facelift hatchback because the pictured donor marking states 2010 5-door. For any other body style, compare the engineering number and mounting shape before purchase.

No confirmed cross-model fitment

We have not confirmed this part for Ford C-Max, Fiesta, Mondeo, Kuga or any non-Focus model. Do not assume fitment because another vehicle uses a related platform.

Will not fit / do not order for:

Ford Focus Mk1.
Ford Focus Mk3 or later generations, including vehicles first registered in 2011 that are the newer Mk3 shape.
The right-hand / O/S / UK driver side.
A vehicle carrying a different moulded engineering number or different mounting-hole layout.
A non-standard aftermarket side-skirt or body-kit installation unless the original part shape and number are identical.
Buyers requiring the complete full-length side skirt - this listing is for the small front end trim only.

Common Reasons for Replacement

Trim is missing after kerb, jack or road-debris contact.
Broken mounting holes, tabs or fixing points allow the corner to sit loose.
Rattling, vibration or movement from the lower sill area.
A visible gap behind the front wheel arch or poor alignment with the side skirt.
Road dirt and spray reach exposed fixings because the end trim is missing.
The existing trim is cracked, heavily scraped or distorted.

Replacing a damaged or missing piece restores the intended lower-body finish and helps the surrounding trim sit correctly. This is primarily a body-protection and appearance component rather than a safety-critical electronic part.

Why Choose a Manufacturer-Produced Used Part?

Correct mould geometry
Factory hole spacing, edge profile and locating points are more likely to line up with the original body and adjacent trim than a low-cost copy.

Matching texture and material
The moulded PP+EPDM blend and surface finish are designed for flexibility, weather exposure and the original vehicle's trim system.

Better value and reuse
A used factory part can cost substantially less than buying new - on some car parts the saving can be as much as 70%, depending on the current new price and availability.

Fitting Guide

Safety first: work on level ground, apply the parking brake and use the vehicle manufacturer's approved lifting points. Never work beneath a vehicle supported only by a jack. If you are unsure, use a qualified workshop.

Suggested tools

Plastic trim-removal tool
Torx bit set, commonly T20/T25/T30 as applicable to the vehicle
Small socket set, commonly 7 mm, 8 mm or 10 mm as applicable
Ratchet, extension, torch, gloves and cleaning cloth
Replacement trim clips or screws where the originals are damaged or missing
Trolley jack and axle stands only if extra access is required

Compare the replacement trim with the old part before removing anything. Confirm left-hand orientation, number, shape and fixing positions.

Turn the steering for access or remove the front left wheel if needed. Raise and support the vehicle safely where required.

Remove the existing screws, clips or retainers from the lower front sill/wing corner. Use a trim tool to avoid damaging the surrounding plastic.

Clean the mating area and inspect the wing, sill and side-skirt mounting points. Repair or replace damaged retainers before fitting the trim.

Offer the replacement part into position without forcing it. Hand-start all fasteners before tightening.

Tighten evenly until secure. Do not overtighten into aged plastic. Confirm the trim sits flush and does not contact the tyre or wheel.

Refit the wheel where removed, lower the vehicle correctly and check for movement or rattling after a short drive.

Estimated fitting time: approximately 0.4-0.8 labour hours for a straightforward replacement. Corroded fasteners, broken retainers, previous body repairs or damaged surrounding panels can increase the time.

Garage Labour Cost Calculator - Static eBay-Safe Table

Static estimate: hourly labour rate x 0.4 to 0.8 hours. These figures are guidance only and do not include clips, body repairs, wheel removal charges or VAT charged by the fitting garage.

Garage Rate	0.4 Hour Estimate	0.8 Hour Estimate
£50 per hour	£20	£40
£75 per hour	£30	£60
£100 per hour	£40	£80
£125 per hour	£50	£100
£150 per hour	£60	£120

Fitting & Repair Service

We offer fitting and garage repair services subject to workshop availability. Ask through eBay Messages before travelling or purchasing a fitting appointment.

Collections are available 7 days a week until 8 pm by prior appointment, including bank holidays by prior arrangement.

Illustrative mechanic workshop repair service image

THEPARTPILOT

Illustrative workshop image - fitting and repairs subject to availability

Delivery, Collection & Address Information

UK delivery: dispatched using the postage service shown in the listing.
International delivery: available to eligible destinations offered by eBay's Global Shipping Programme or successor international service. The exact countries, charges, customs fees and eligibility are displayed by eBay at checkout.
Checkout address: buyers must ensure the delivery address is complete and correct before payment. We cannot amend the address after checkout.
Collection: by confirmed appointment only. Arrange the date and time through eBay Messages.
Dispatch: the part will be packed to protect vulnerable corners and fixing points, subject to its disclosed used condition.
How to find us / WhatsApp

Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

Warehouse Stock & Dispatch

Illustrative warehouse shelves containing boxed stock

25,000+ PARTS

Illustrative stock image - more than 25,000 parts held on shelf

Illustrative warehouse staff carrying boxed items for dispatch

THEPARTPILOT DISPATCH

Illustrative dispatch image - boxed items prepared for delivery

Returns & Fitment Checks

Please use the part number, photographs and fitment chart before ordering. When uncertain, send your VIN, registration, a clear photograph of the old part and its moulded number through eBay Messages. We will help verify the match, but the buyer remains responsible for checking the supplied information against the vehicle.

Returns are handled through eBay and the return terms displayed on the listing. Any refund deduction is made only where eBay permits it and only to reflect an actual loss in value, such as installation marks, damage, missing components or inadequate return packaging. This does not limit statutory rights or a valid item-not-as-described claim.

Parts should not be fitted, modified, painted, drilled or damaged when the buyer intends to return them after an inspection.

VAT Information

VAT Margin Scheme - Second-Hand Goods / Global Accounting: VAT is not shown separately on the invoice and is not reclaimable. The total purchase price is the amount shown at checkout.

Support a Small Business & Reuse Car Parts

🚗♻️ Buying a quality used car part supports a local small business, keeps usable components in circulation and reduces the demand for new raw materials, manufacturing energy and unnecessary waste. Every correctly reused part is one less serviceable component sent for disposal.

Thank you for choosing ThePartPilot and for checking the fitment carefully so the correct part is ordered first time.

THEPARTPILOT | BRAND-PROTECTED LISTING

25,000+ used vehicle parts in stock
Fitting service, repair work and late collections available subject to prior appointment.

Vehicle photograph: 2009-2010 Ford Focus (LV) CL 5-door hatchback, author OSX, released to the public domain. Workshop and warehouse photographs are illustrative Pexels stock images. Ford names and part numbers are used only to identify compatibility; no manufacturer endorsement is implied.