Honda CR-V Rear Windscreen Wiper Arm & Blade

Quality used original-specification Honda component removed from a compatible third-generation CR-V. Designed for the rear tailgate windscreen wiper system.

The catalogue application for rear wiper arm part number 76720-SWA-003 covers Honda CR-V 5-door models from 2007 through 2011.

IMPORTANT: Compare the photographs, mounting design and any number moulded/stamped into your existing component before ordering. If you are uncertain, contact us through eBay Messages with your VIN and we can help verify compatibility before purchase.

PART INFORMATION

*Catalogue references should be compared against the photographed item before purchase. The physical part and photographs take precedence where applicable.

✓ VERIFIED APPLICATION CHART

Do not order solely because you own a Honda CR-V.

This listing should NOT be treated as compatible with CR-V models outside the 2007-2011 5-door catalogue application. In particular, do not assume compatibility with the later 2012-on generation, earlier CR-V generations, or other Honda models.

If your existing arm, mounting arrangement or part number differs, please ask us to verify your VIN through eBay Messages before ordering.

WHAT DOES THIS PART DO?

The rear wiper arm connects the rear wiper motor spindle to the wiper blade. Motor movement is transferred through the arm, allowing the blade to sweep across the rear windscreen and remove rain, road spray and dirt.

Maintaining effective rear-screen visibility is particularly important in poor weather, motorway spray, winter conditions and when reversing.

COMMON SIGNS OF A FAULTY WIPER ARM

• Rear blade fails to sweep correctly.
• Wiper arm moves but slips on the motor spindle.
• Arm sits at an incorrect resting angle.
• Blade does not maintain even pressure against the glass.
• Cracked, damaged or distorted arm.
• Corroded or worn spindle mounting splines.
• Excessive movement or looseness at the mounting point.
• Poor rear visibility during rain or road spray.

WHY CHOOSE AN ORIGINAL USED COMPONENT?

An original manufacturer-specification component was engineered around the vehicle's spindle dimensions, blade geometry, sweep angle and tailgate clearance. A correctly matched original used component can therefore offer an excellent combination of fit, appearance and value.

Cheap pattern alternatives can vary in moulding quality, spindle engagement, spring pressure and blade positioning. Correct fitment remains essential regardless of whether a replacement is new or used.

Buying quality used vehicle components can also represent a substantial saving compared with purchasing an equivalent new component. Depending on the individual component and current new retail price, used parts can offer savings of up to approximately 70%.

🔧 BASIC FITTING GUIDE

1. Switch the vehicle off and ensure the rear wiper is parked.
2. Protect the rear glass and surrounding paintwork.
3. Lift/remove the spindle nut cover where applicable.
4. Mark the original resting position of the existing wiper arm.
5. Remove the retaining nut using the appropriate socket.
6. Carefully release the old arm from the splined motor spindle.
7. Clean and inspect the spindle before installation.
8. Position the replacement arm at the correct parked angle.
9. Refit and tighten the retaining hardware to the manufacturer's specification.
10. Operate the rear wiper and verify the sweep before final use.

TOOLS TYPICALLY REQUIRED

• Suitable socket and ratchet
• Small trim tool where required
• Pen or masking tape for marking the parked position
• Penetrating fluid if the old arm is seized
• Wiper-arm puller if required
• Torque wrench where manufacturer torque data is available
• Protective gloves

⏱ ESTIMATED FITTING TIME & LABOUR COST

A straightforward rear wiper-arm replacement is commonly a short workshop operation. Allow approximately 0.25-0.50 labour hours, depending on corrosion, access and whether the old arm is seized.

Labour figures are illustrative estimates only. Actual workshop charges vary.

We hold more than 25,000 vehicle components on the shelf at any one time, covering a wide range of makes and models.

How to find us / WhatsApp

Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

🌍 INTERNATIONAL DELIVERY

Eligible orders can be supplied internationally through eBay's international shipping programme. Availability, postage price, import charges and destination eligibility are determined by eBay at checkout.

Please ensure your delivery address is completely correct before completing checkout. Orders must be dispatched using the address supplied through the eBay transaction and we cannot simply substitute a different delivery address after purchase.

This used component is supplied under the applicable margin scheme. VAT is not separately itemised or reclaimable on the sale price.

↩ RETURNS & CORRECT FITMENT

Our priority is helping customers order the correct component first time. Please use the fitment chart, compare the listing photographs and ask us through eBay Messages if you are uncertain.

Returns are handled in accordance with the return policy shown on the eBay listing and your applicable statutory rights. Please return the supplied component complete and take reasonable care of it while it is in your possession.

🚗 WE ALSO BUY CARS

ThePartPilot also purchases vehicles for recycling and parts recovery, with nationwide collection and same-day payment options subject to vehicle assessment, availability and agreed terms.

Choosing a quality used vehicle component helps keep serviceable parts in circulation, reduces unnecessary waste and extracts more useful life from components that have already been manufactured.

Every purchase also supports an independent UK automotive parts business, our stock operation and the people involved in dismantling, checking, storing, packing and dispatching reusable components. 🌍🔧📦

Correct Part • Clear Fitment • Quality Used Components