Honda CR-V Mk3 07-12 Diesel Brake Fluid Reservoir Tank 0204255770
Honda CR-V Mk3 07-12 Diesel Brake Fluid Reservoir Tank 0204255770
Honda CR-V Mk3 (2007-2012) Diesel Brake Fluid Reservoir Tank (0204255770)
Premium Recycled Auto Parts | Global VAT Scheme | Worldwide Delivery
Vehicle Reference & Fitment Location
This part is removed from and specifically designed to fit the Honda CR-V Mk3 (2007-2012) 2.2 i-CTDi / i-DTEC Diesel models. Below is a reference image of the exact vehicle type this part belongs to, along with the manufacturer logo to guarantee authenticity.
Where is this part fitted & What does it do?
This brake fluid reservoir tank is mounted in the engine bay on the bulkhead (driver's side / offside) directly sitting atop the master brake cylinder and clutch master cylinder interface. It holds hydraulic brake fluid under atmospheric pressure, supplying the braking system and ensuring consistent pedal pressure.
Part Details & Symptoms of Failure
Material: Translucent, chemical-resistant automotive polymer designed to handle brake fluid (DOT 4) corrosion and engine bay heat cycles.
Common Symptoms of a Faulty / Damaged Unit:
- Visible cracks, weeping, or fluid leaks around the reservoir base or rubber grommets.
- Brake fluid level dropping consistently without external caliper leaks.
- Discolored or heavily contaminated plastic obscuring fluid level checks.
- Faulty fluid level warning sensor triggering dashboard brake warnings.
Why buy a factory original part? Aftermarket brake reservoirs can suffer from brittle plastic molding and poor rubber seal mating, leading to dangerous fluid leaks. Original Honda parts guarantee correct bracket alignment and fluid security. Buying quality recycled parts saves you up to 70% off main dealer prices!
Vehicle Fitment & Compatibility Chart
Please use this chart to confirm fitment. Note: Specifically configured for Diesel models (2.2 i-CTDi / i-DTEC). Always verify part number 0204255770.
| Vehicle Model & Engine Spec | Years | Fitment Status |
|---|---|---|
| Honda CR-V Mk3 2.2 i-CTDi / i-DTEC Diesel | 2007 - 2012 | CONFIRMED FIT |
| Honda CR-V Mk3 2.0 Petrol (Different Layout) | 2007 - 2012 | WILL NOT FIT |
| Honda CR-V Mk2 (Previous Generation) | 2002 - 2006 | WILL NOT FIT |
Fitting Instructions & Garage Repair Estimator
Estimated Repair Time: 30 - 45 Minutes
Required Tools: Pliers, turkey baster (to extract old fluid), clean lint-free rags, socket set (10mm).
Brief Instructions: Extract existing brake fluid from the old reservoir using a syringe/baster. Disconnect the fluid level sensor electrical plug. Carefully unclip or unbolt the reservoir from the master cylinder master body, pulling upwards out of the rubber sealing grommets. Replace the rubber grommets if worn, push the new reservoir firmly into position, reconnect the sensor, refill with fresh DOT 4 brake fluid, and bleed the system if air entered the master cylinder.
Garage Labour Cost Calculator
If you prefer a professional to fit this, use our static calculation table below to estimate your labour bill (based on a 0.5-hour estimated time):
| Garage Hourly Rate (£) | Estimated Time | Total Estimated Labour Cost |
|---|---|---|
| £50.00 / hr (Local Independent) | 0.5 Hour | £25.00 |
| £75.00 / hr (Specialist) | 0.5 Hour | £37.50 |
| £120.00 / hr (Main Dealer) | 0.5 Hour | £60.00 |
*We also offer a professional fitting service subject to availability. Please contact us to book!
Why Buy From ThePartPilot?
We are a professional facility with more than 25,000 parts in stock and on the shelf at any one time. Our parts are securely stored, comprehensively tested, and ready for immediate dispatch.
Shipping, Collection & VAT Policies
- Global VAT Scheme: We operate under the global VAT margin scheme. No VAT is charged on top of this purchase!
- Shipping: Standard shipping rates apply. We securely package all items to ensure safe transit.
- Worldwide Shipping via eBay GSP: We proudly post worldwide through the eBay Global Shipping Programme. Included countries: USA, Canada, Australia, France, Germany, Italy, Spain, Ireland, Japan, and many more!
- Local Collection: We offer local order collection options for customers seven days a week up to 8:00 PM by prior appointment (including Bank Holidays).
Returns Policy
We provide exhaustive fitment data, compatibility charts, and high-resolution images. Because of this, any parts returned under the "Doesn't Fit" or "Item Not As Described" categories due to buyer error will have a 50% restocking fee deducted. If you are unsure about fitment, please message us before buying—we are happy to verify it for you using our exact images and part numbers!
We offer nationwide collection and same-day payment. Got a car to sell or scrap? Contact us today.
When you choose to buy from ThePartPilot, you aren't just saving money—you are supporting a hard-working local small business. 🤝 Even better, by choosing premium recycled parts, you are actively reducing global carbon emissions, saving energy, and keeping perfectly good materials out of landfills. Thank you for making an eco-friendly choice! 💚 🚘
How To Find Us / Contact Us
Need to verify a part number or arrange a fitting? Scan the QR code below with your smartphone camera to message us directly on WhatsApp!