HONDA JAZZ 2002-2008 LOWER CENTRE CONSOLE PANEL
HONDA JAZZ 2002-2008 LOWER CENTRE CONSOLE PANEL
Honda Jazz GD 5 Door Lower Centre Console / Cup Holder / Handbrake Trim
Important Fitment Verification
This used console must be matched by vehicle generation, 5-door body, centre-console shape, selector opening, handbrake opening, cup-holder layout, mounting points, colour/texture and, where available, the moulded manufacturer part number and 17-character VIN.
The physical item in this listing is recorded as a Honda Jazz GD centre-console component. Research identifies 83403-SAA-G02ZA as the strongest catalogue candidate for this shape and application; however, that number must not be treated as the confirmed number of this individual used item until it is visible on the part itself or verified against the donor VIN.
Actual Used Part - Listing Photographs
These are photographs of the used part offered for sale. Please inspect every image for condition, mounting points, marks, wear and exactly what is included.
Reference Vehicle - Correct GD 5 Door Body Style
The following photographs are vehicle references only. They show the Honda Jazz GD 5-door generation associated with the researched console family. Vehicle colour, wheels, specification and cabin trim may differ from your own car. An exterior photograph alone is never proof of part fitment.
Public-domain vehicle reference photography. Reference images are supplied only to identify the vehicle generation/body style and do not replace VIN or manufacturer-number verification.
Where This Part Is Fitted
This trim assembly is positioned on the lower centre tunnel between the two front seats. It surrounds or sits immediately around the gear-selector area, handbrake area and integrated storage/cup-holder section, depending on exact vehicle specification.
What It Does
The console is primarily a structural and cosmetic interior trim component. It locates and finishes the centre-tunnel area, supports storage/cup-holder features and provides correctly positioned openings around adjacent controls. The plastic console itself does not command the engine, gearbox or braking system. Any electrical socket, switch, illumination component, boot, cover or removable insert is only included where clearly shown in the actual-item photographs.
Fitment Research Chart
| Vehicle / Year | Body / Generation | Research Status | Buyer Action |
|---|---|---|---|
| Honda Jazz 2004 | GD family, 5-door | Candidate console number appears in catalogue applications. | VIN + existing part/shape check required. |
| Honda Jazz 2005 | GD family, 5-door | Candidate console number appears in catalogue applications. | VIN + existing part/shape check required. |
| Honda Jazz 2006 | GD family, 5-door | Candidate console number appears in catalogue applications. | VIN + existing part/shape check required. |
| Honda Jazz 2007 | GD family, 5-door | Candidate console number appears in catalogue applications. | VIN + existing part/shape check required. |
| Honda Jazz 2008 | GD family, 5-door | Candidate console number appears in catalogue applications. | VIN + existing part/shape check required. |
Do Not Assume Fitment To These Vehicles
| Vehicle | Status | Reason |
|---|---|---|
| Honda Jazz 2002 | NOT CERTIFIED | No blanket fitment claim should be made without VIN and part-number confirmation. |
| Honda Jazz 2003 | VIN / REVISION CHECK | Console revisions/specifications exist around this model year. Do not assume all 2003 cars use the same assembly. |
| Honda Jazz 2009 onward | NOT CLAIMED | Later-generation console assemblies must be treated separately. |
| Any different body style | NOT CLAIMED | This research is for the 5-door GD hatchback application shown. |
| Honda Fit GD / import variants | CHECK BEFORE BUYING | Cross-market catalogue overlap exists, but frame/VIN, interior code, transmission and physical console number must all be checked before claiming interchange. |
| Any other Honda model | NOT CLAIMED | A visually similar console is not proof of interchangeability. |
Part Identification Checklist
For the lowest risk of an incorrect order, compare all of the following:
- 17-character VIN.
- Moulded manufacturer part number on the original console.
- Honda Jazz GD 5-door body/generation.
- Manual/CVT selector opening and surrounding trim geometry.
- Handbrake slot and handbrake-cover position.
- Number, position and shape of cup holders/storage recesses.
- Front, side and rear screw/clip mounting points.
- Auxiliary/socket holes and removable inserts.
- Colour, grain and surface texture.
- Any clips, covers, boots or socket assemblies that need transferring from the old console.
Condition & Construction
| Attribute | Details |
|---|---|
| Condition | Used - inspect the actual-item photographs for cosmetic wear and marks. |
| Component | Lower / centre console trim assembly. |
| Location | Centre tunnel between the front seats. |
| Colour | Black / dark interior finish as photographed. |
| Material | Moulded automotive plastic. Exact polymer grade is not claimed unless identified on the physical moulding. |
| Candidate Reference | 83403-SAA-G02ZA - research candidate only until physically/VIN confirmed. |
| Included | Only the components and fittings visibly supplied in the actual-item photographs. |
Symptoms of a Damaged Centre Console
- Cracked, split or heavily damaged plastic.
- Broken mounting tabs or missing clip locations.
- Console feels loose or moves while driving.
- Rattling, vibration or squeaking from the centre tunnel.
- Damaged cup holders or storage sections.
- Poor alignment or excessive gaps against adjoining trim.
- Missing covers or exposed fixings.
- Distortion around the selector or handbrake opening.
Why Choose an Original Manufacturer-Made Used Part?
When correctly matched, a manufacturer-produced donor component retains the intended mounting geometry, clip locations, aperture positions, moulding shape and cabin texture. Low-cost reproduction mouldings can vary in clip alignment, plastic finish, colour, dimensional tolerance and fit against neighbouring trim.
Reusing a serviceable original part can also provide a substantial saving over buying the equivalent new component. On selected vehicle parts, used components can cost up to around 70% less than new alternatives. The actual saving varies by component, availability and current new-part pricing.
Fitting Guide
Suggested Tools
- Plastic interior trim-removal tools.
- Phillips/JIS screwdriver as appropriate.
- Small socket and ratchet set.
- Small pick for trim clips where required.
- Work light / torch.
- Magnetic tray for screws.
- Replacement trim clips if any existing clips are damaged.
General Installation Sequence
- Park safely on level ground, switch the ignition off, remove the key and secure the vehicle.
- Before dismantling anything, place the replacement beside the existing console and compare every opening, mounting point and contour.
- Protect adjacent trim with suitable non-marking protection.
- Remove removable inserts/covers and only the fasteners that are visibly associated with the console.
- Use plastic trim tools to release clips progressively. If the console will not release, stop and check for a hidden fastener rather than forcing it.
- Carefully manoeuvre the console around the selector and handbrake.
- If your vehicle has an electrical socket or accessory connector in this area, disconnect it only after identifying its retaining mechanism.
- Transfer any required clips, inserts, socket, covers or boots from the old console where they are not supplied with this item.
- Trial-fit before tightening. Confirm all mounting points align naturally with no force.
- Confirm full unrestricted movement of the selector and handbrake before final assembly.
- Tighten plastic-trim fasteners carefully; do not overtighten and crack the mounting bosses.
- Refit covers/inserts, check panel gaps and carry out a final functional inspection.
Estimated Labour Time
A straightforward trim swap can commonly be planned at approximately 0.5 to 1.0 hour. Broken clips, seized fixings, accessories, previous repairs or specification differences can increase the time. This is a planning estimate rather than a fixed labour quotation.
Garage Labour Cost Estimator
No JavaScript is used. Simply multiply your garage's hourly rate by the estimated fitting time. The table below gives quick labour-only examples.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50/hr | £25.00 | £37.50 | £50.00 |
| £60/hr | £30.00 | £45.00 | £60.00 |
| £75/hr | £37.50 | £56.25 | £75.00 |
| £90/hr | £45.00 | £67.50 | £90.00 |
| £100/hr | £50.00 | £75.00 | £100.00 |
| £120/hr | £60.00 | £90.00 | £120.00 |
| £150/hr | £75.00 | £112.50 | £150.00 |
Formula: hourly labour rate x estimated hours. Figures exclude the part itself, diagnosis, damaged/seized fixings and any additional work required.
Fitting & Repair Service
ThePartPilot can also offer fitting and vehicle-repair work subject to workshop availability, vehicle assessment and prior arrangement. Please contact us through eBay Messages before travelling or purchasing specifically on the basis of fitting availability.
Illustrative workshop photograph only - this photograph is not ThePartPilot's premises.
25,000+ Parts In Stock
More than 25,000 vehicle parts stocked and on the shelf at any one time. Our fitment-first approach is designed to help identify the correct component before dispatch and reduce avoidable returns.
Illustrative warehouse photograph only - not a photograph of ThePartPilot's premises.
Collection - By Prior Appointment
Collections can be arranged 7 days a week until 8pm, including bank holidays, subject to prior appointment. Please arrange collection through eBay Messages before travelling so the part can be located and prepared for you.
UK & International Delivery
International delivery may be available through eBay's Global Shipping Programme where this particular listing, item and destination are eligible. Final postage, import charges, destination availability and delivery options are those displayed by eBay at checkout.
Current eBay GSP Eligible EU Destinations
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Current eBay GSP Eligible Non-EU Destinations
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
Important Checkout Address Notice
Orders must be dispatched using the address supplied through eBay checkout. We cannot manually redirect an order to a different address after checkout. If you notice an address error, contact us through eBay immediately so the available eBay cancellation/re-order options can be considered before dispatch.
VAT Information
Where applicable, this used component is sold under the Global Accounting VAT Margin Scheme. VAT is accounted for within the applicable scheme and is not shown separately as a reclaimable VAT amount.
Returns & Fitment Responsibility
Returns are handled according to the return policy displayed by eBay on this listing and applicable consumer law. Please use the fitment information, photographs and verification service before ordering.
There is no automatic fitment restocking charge stated here. Where eBay permits an eligible seller to make a deduction because a returned item has been used, altered, damaged, made incomplete or otherwise lost value, any qualifying deduction is condition-based and processed through the eBay return process.
Reusing Parts Makes Sense ♻️
Buying a serviceable used vehicle component keeps an existing part in productive use, reduces demand for replacement manufacturing and can reduce the amount of usable material entering the waste stream. It can also provide excellent value compared with buying the equivalent component new.
By purchasing from ThePartPilot you are also supporting a local independent vehicle-parts business. We appreciate every order and work hard to identify, inspect, store, pack and dispatch parts accurately. 🛠️ ♻️ 📦
Packed For Dispatch 📦
Used automotive trim needs careful packing to protect clips, mounting tabs, corners and cosmetic surfaces while in transit.
Illustrative dispatch photograph only - not a photograph of ThePartPilot's premises.