Hyundai i40 VF Saloon 2012-2019 Rear Glass Aerial Antenna Amplifier 96270-3Z000
Hyundai i40 VF Saloon 2012-2019 Rear Glass Aerial Antenna Amplifier 96270-3Z000
| Manufacturer | Hyundai |
| Exact Part Number | 96270-3Z000 |
| Number Without Hyphen | 962703Z000 |
| Part Type | Rear glass radio aerial / antenna signal amplifier module |
| Vehicle Family | Hyundai i40 VF |
| Body Style Claimed Here | 4-door Saloon / Sedan |
| UK Model Range Reference | 2012-2019 — exact part-number or VIN confirmation still mandatory |
| Label / Supplier Marking | INFAC Elecs marking visible on photographed module |
| Construction | Metal outer housing / mounting bracket with insulated electrical connections and internal electronics |
| Condition | Used — please inspect all listing photographs for cosmetic condition |
| Warranty | 30 days, subject to the listing terms |
| Vehicle | Years | Body | Fitment Status |
|---|---|---|---|
| Hyundai i40 VF | 2012-2015 UK range | 4-door Saloon / Sedan |
CATALOGUE APPLICATION Order only when 96270-3Z000 matches the old module or VIN lookup confirms it. |
| Hyundai i40 VF | 2015-2019 UK range | 4-door Saloon / Sedan |
PART-NUMBER CONTINUITY DOCUMENTED Exact part-number or VIN confirmation remains mandatory. |
| Hyundai i40 Tourer / CW / Estate | 2011-2019 | 5-door Estate / Wagon |
DO NOT ASSUME COMPATIBILITY Separate antenna configurations/hardware are catalogued. Order only if a VIN-specific lookup explicitly returns 96270-3Z000. |
| Other Hyundai / Kia models | Any | Any |
NOT CONFIRMED Manufacturer markings on the module are not proof that it interchanges into another model. |
This module forms part of the rear-window glass radio aerial system. On glass-antenna-equipped i40 vehicles, the AM/FM antenna elements are incorporated into the rear window glass.
The amplifier conditions and boosts the radio-frequency signal from the glass antenna before that signal reaches the vehicle audio system. The module is therefore associated with radio reception rather than engine, transmission or vehicle-control functions.
- Weak or reduced AM/FM reception
- Fewer radio stations found during an automatic scan
- Static, interference or noisy reception
- Reception that fades or drops out intermittently
- Only strong local stations being received reliably
Correctly matched factory-spec components retain the original connector arrangement, physical mounting design and electrical characteristics intended for the vehicle's antenna system. Matching the exact number reduces the risk of improvised adapters, unsuitable electrical characteristics or mounting differences that can occur with low-cost pattern copies.
Buying a quality used manufacturer-branded component can also provide substantial value compared with buying a new replacement. On selected used vehicle parts, savings may be up to 70% compared with equivalent new replacement pricing, depending on the part, vehicle and current market price.
- Plastic interior trim-removal tools
- Small ratchet and socket/spanner sized to the fastener actually fitted to your vehicle
- Torch or inspection light
- Soft protective cloths for trim and glass
- Multimeter / electrical test equipment if diagnosis is required
- Suitable radio reception test or station scan after installation
- Verify the existing number first. Confirm 96270-3Z000 before dismantling the vehicle.
- Switch the ignition and audio system off and follow the vehicle workshop procedure for electrical work.
- Identify the original rear-glass antenna amplifier and photograph its connector/wiring routing before removal.
- Carefully release the necessary rear trim using non-marring trim tools. Do not force trim clips.
- Disconnect the electrical/radio feeder connections from the original amplifier without pulling on the wiring.
- Remove the amplifier mounting fastener and note the exact orientation of the original module.
- Install the replacement in the same position and orientation, reconnect all plugs securely and check wiring is not trapped.
- Test AM/FM reception and perform a station scan before completely refitting all removed trim.
- If your access route involves SRS/airbag trim or wiring, stop and follow the correct VIN-specific workshop procedure or use a qualified repairer.
This is an independent planning estimate, not a manufacturer flat-rate time. Diagnosis, seized fittings, damaged trim clips or additional wiring faults can increase labour time.
eBay descriptions cannot use an active JavaScript calculator, so use this static lookup table. Formula: hourly labour rate × workshop time = estimated labour cost.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50/hr | £25.00 | £37.50 | £50.00 |
| £60/hr | £30.00 | £45.00 | £60.00 |
| £75/hr | £37.50 | £56.25 | £75.00 |
| £90/hr | £45.00 | £67.50 | £90.00 |
| £100/hr | £50.00 | £75.00 | £100.00 |
| £120/hr | £60.00 | £90.00 | £120.00 |
| £150/hr | £75.00 | £112.50 | £150.00 |
ThePartPilot also offers a fitting and repair service subject to workshop availability. Please message us through eBay before purchase if fitting is required.
We hold more than 25,000 automotive parts in stock and on the shelf at any one time, with stock changing daily. If you require another component for the same vehicle, check our other eBay listings or message us through eBay.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
We can only dispatch to the delivery address supplied with the eBay order. Please correct your address before checkout. We cannot change the eBay order address for you after purchase.
UK Delivery: dispatched using the delivery service shown on the eBay order.
International Delivery: available to eligible destinations through the eBay Global Shipping Programme where the option is offered to your delivery address at checkout. Destination availability, international charges, customs processing and item eligibility are determined by eBay.
Collection: available by prior appointment 7 days a week, up to 8pm, including bank holidays by prior arrangement and subject to availability. Please arrange collection through eBay Messages. Collection location/details are supplied as part of the agreed appointment.
Our aim is to help you identify the correct part before it is installed. Please compare the complete part number, connector layout, mounting arrangement and listing photographs before purchase. If unsure, send your VIN through eBay Messages and request a compatibility check.
This qualifying used item is sold under the Global Accounting VAT Margin Scheme. VAT is accounted for within the applicable margin and is not shown separately on the sale. There is therefore no separately stated VAT amount for the purchaser to reclaim on this item.
Buying used automotive parts supports a local small business while giving serviceable components another useful life. Reusing parts can reduce demand for new raw materials, manufacturing, packaging and unnecessary disposal. Every suitable component kept in circulation is one less serviceable part going to waste.
