IVECO Daily Mk3 2000-2005 RHD Lockable Dashboard Glove Box 500336593
£22.00
Skip to product information
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
IVECO Daily Mk3 2000-2005 RHD Lockable Dashboard Glove Box 500336593
£22.00
THE PART PILOT
QUALITY VEHICLE PARTS • 25,000+ PARTS IN STOCK
30-DAY SELLER WARRANTY • WORLDWIDE DELIVERY WHERE OFFERED BY eBAY • FITTING SERVICE SUBJECT TO AVAILABILITY
IVECO DAILY III / MK3 • RIGHT-HAND DRIVE
IVECO DAILY 2000-2005 RHD LOCKABLE DASHBOARD GLOVE BOX
Manufacturer Part Number: 500336593
Secondary listing / stock reference: 56712 • eBay item number: 147479020769
⚠ CRITICAL FITMENT CHECK
This is a right-hand-drive passenger-side dashboard glove box assembly. Fitment is restricted to the Iveco Daily III / Mk3 dashboard used in the verified listing range below. Before ordering, compare the overall shape, lock position, lower hinge, rear mounting structure and part number with your original unit. A registration number alone may not identify dashboard trim accurately.
ACTUAL ITEM PHOTOGRAPHS
These are the actual listing images hosted on eBay's secure image network. They show the condition, lock, hinges and rear mountings.
 |
 |
 |
 |
 |
 |
✖ THIS PART WILL NOT FIT
• Left-hand-drive Iveco Daily vehicles
• Daily II / earlier dashboard designs
• Daily IV and later 2006-on dashboard designs
• Any vehicle with a different glove-box shape, lock location, hinge layout or rear mounting frame
• Any vehicle where the original part number does not match 500336593, unless fitment has been independently confirmed by the manufacturer catalogue or a direct side-by-side comparison
• Daily II / earlier dashboard designs
• Daily IV and later 2006-on dashboard designs
• Any vehicle with a different glove-box shape, lock location, hinge layout or rear mounting frame
• Any vehicle where the original part number does not match 500336593, unless fitment has been independently confirmed by the manufacturer catalogue or a direct side-by-side comparison
WHERE IT FITS & WHAT IT DOES
The assembly installs into the front passenger side of the dashboard on right-hand-drive Daily III vehicles. It provides enclosed dashboard storage and uses the front lock / latch, lower hinge and rear mounting frame to keep the compartment closed and aligned with the surrounding dashboard.
Position guide: sit in the passenger seat of a UK right-hand-drive vehicle and look directly ahead at the lower dashboard. The glove box occupies the passenger-side dash panel, opposite the steering wheel. Compare the curved outer edge, long recessed handle, lock barrel position and lower hinge with your existing unit.
COMMON FAULTS & REASONS TO REPLACE
• Lid will not stay shut or opens while driving
• Broken latch, lock barrel, hinge or retaining points
• Cracked mounting tabs causing rattles or poor alignment
• Damaged storage shell allowing contents to fall behind the dashboard
• Severe cosmetic damage affecting the appearance of the cab interior
• Broken latch, lock barrel, hinge or retaining points
• Cracked mounting tabs causing rattles or poor alignment
• Damaged storage shell allowing contents to fall behind the dashboard
• Severe cosmetic damage affecting the appearance of the cab interior
A correctly matched factory-fit component follows the original dashboard contours and mounting pattern. This generally gives more predictable alignment and latch operation than an incorrectly shaped universal or low-cost pattern replacement. The most important advantage is not the label—it is matching the exact part number and moulding shown.
FITTING GUIDE
Estimated repair time: approximately 30-60 minutes for a straightforward direct replacement. Allow 60-90 minutes if the lock barrel, latch parts or surrounding trim need to be transferred or adjusted.
Suggested tools: plastic trim tools, Phillips / Pozidriv screwdriver, small flat screwdriver, assorted Torx bits, 8 mm and 10 mm socket set, torch and magnetic parts tray. Fastener type may vary by build.
- Park safely, switch off the ignition and remove the key. If working near any airbag wiring, follow the vehicle workshop manual before disconnecting the battery.
- Open and support the existing glove box. Remove accessible screws, stops, trim caps and retaining clips without forcing the surrounding dashboard.
- Release the lower hinge / pivot points and withdraw the assembly carefully.
- Compare the removed unit side by side with this part. Confirm 500336593, lock position, outer profile, rear bracket and all fastening points.
- Transfer the original lock barrel, latch or reusable clips if required. A key is not shown with this item.
- Offer the replacement into position, engage pivots and clips, then install fasteners finger-tight before final alignment.
- Open and close the lid several times. Confirm the latch holds, the panel sits flush and no wiring or trim is trapped.
Workshop note: instructions are a general guide, not a substitute for the Iveco workshop manual. Do not overtighten screws into aged plastic.
ORDER-CORRECTLY CHECKLIST
1. Confirm your vehicle is an Iveco Daily III / Mk3 built from 01/2000 to 12/2005.
2. Confirm it is right-hand drive.
3. Match manufacturer part number 500336593 on your original unit or reliable catalogue data.
4. Compare the long recessed handle, lock barrel position, curved side profile, lower hinge and rear metal bracket with the photographs.
5. Check whether you need a key or must transfer your original lock barrel.
6. Send clear photographs of your old unit and any visible number through eBay Messages if you need a visual check before ordering.
2. Confirm it is right-hand drive.
3. Match manufacturer part number 500336593 on your original unit or reliable catalogue data.
4. Compare the long recessed handle, lock barrel position, curved side profile, lower hinge and rear metal bracket with the photographs.
5. Check whether you need a key or must transfer your original lock barrel.
6. Send clear photographs of your old unit and any visible number through eBay Messages if you need a visual check before ordering.
♻ WHY CHOOSE A RECLAIMED FACTORY-FIT PART?
Reusing a serviceable vehicle component can cost substantially less than purchasing a new equivalent, while also keeping an existing part in productive use. Exact savings vary by part and market price, so no fixed percentage is guaranteed. Matching the correct manufacturer part number helps preserve the original dashboard fit and reduces unnecessary returns, transport and waste.
DELIVERY, ADDRESS & RETURNS
• UK and international postage options are shown in the eBay listing and at checkout; postage is not described as free in this description.
• International delivery may be available through eBay's managed shipping programme. eBay determines eligible countries, charges, duties and restrictions at checkout.
• Please make sure your delivery address is complete and correct before paying. We cannot change the checkout address after purchase.
• Returns are handled through the eBay returns process and the return terms shown on the listing. The item must be returned in the condition supplied, with all included components.
• Fitment support is available through eBay Messages before purchase. Please provide your registration / VIN, year, steering position, old part number and clear photographs.
• International delivery may be available through eBay's managed shipping programme. eBay determines eligible countries, charges, duties and restrictions at checkout.
• Please make sure your delivery address is complete and correct before paying. We cannot change the checkout address after purchase.
• Returns are handled through the eBay returns process and the return terms shown on the listing. The item must be returned in the condition supplied, with all included components.
• Fitment support is available through eBay Messages before purchase. Please provide your registration / VIN, year, steering position, old part number and clear photographs.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
SUPPORT A UK SMALL BUSINESS
Thank you for supporting The Part Pilot. Every correctly matched reclaimed component helps reduce waste, conserve materials and keep commercial vehicles working. 🚐🔧♻️📦
THE PART PILOT • 25,000+ PARTS IN STOCK • CAREFULLY CHECKED, PACKED AND DISPATCHED
Vehicle names and part numbers are used only to identify compatibility. This listing is not an endorsement by the vehicle manufacturer. Always verify fitment before purchase.