Jaguar X-Type X400 2007-2009 Centre Console Ashtray 12V Socket 4X43F044J53AB

Jaguar X-Type X400 2007-2009 Centre Console Ashtray 12V Socket 4X43F044J53AB

£23.34
Skip to product information
Jaguar X-Type X400 2007-2009 Centre Console Ashtray 12V Socket 4X43F044J53AB

Jaguar X-Type X400 2007-2009 Centre Console Ashtray 12V Socket 4X43F044J53AB

£23.34
THEPARTPILOT
Jaguar X-Type X400 Front Centre Console Ashtray / Storage Cubby with 12V Socket
Part number 4X43-F044J53-AB  |  Front centre console  |  Used original Jaguar factory component
ACTUAL ITEM PHOTOGRAPHED PART NUMBER LED FITMENT 30-DAY LISTING WARRANTY 25,000+ PARTS IN STOCK
Actual Item — Inspect Before Ordering
Actual Jaguar X-Type centre console ashtray storage cubby and 12V socket front view
THEPARTPILOT
Actual item: front face, storage aperture, socket and upper trim.
Actual Jaguar X-Type centre console cubby mounting points and front trim
THEPARTPILOT
Actual item: mounting tabs, aperture shape and trim profile.
Actual Jaguar X-Type centre console socket rear and underside connection
THEPARTPILOT
Actual item: rear/underside view for socket and connector comparison.
Condition protection: this is a used interior component. Surface marks, scratches, trim wear and age-related signs may be visible. The photographs form part of the condition description. Check every image at full size before purchase.
Part Identification
Vehicle family
Jaguar X-Type, X400 platform
Part type
Front centre-console ashtray / storage cubby housing with integrated 12V cigar-lighter-style socket
Main number
4X43-F044J53-AB / 4X43F044J53AB
Related reference
4X43-F044J78-A is also associated with this assembly in parts-market cross-references. Treat it as a moulding/reference number and verify the complete assembly before ordering.
Position
Front interior, lower centre console / centre stack, ahead of the gear selector area
Colour / finish
Black or charcoal moulded housing with silver-coloured upper trim, exactly as photographed
Materials
Automotive moulded plastic housing and trim, metal socket body/contacts and electrical connector. Exact polymer grade is not stated.
Included
The photographed assembly only. No additional loom, loose fixings, lighter element, surrounding console, gear trim or tools unless clearly visible in the listing photographs.
Donor information
Listing identifies a 2007 Jaguar X-Type donor. No donor VIN has been supplied in this description.
Fitment — Read Before Buying
Correct verification order: VIN and Jaguar parts catalogue → exact part number → connector and mounting tabs → trim colour/finish → body and transmission layout → visual comparison. The eBay compatibility table is a guide, not a substitute for a VIN check.
Compatibility currently documented for this listing
Year Model / platform Body Engine Fitment status
2007 Jaguar X-Type X400 Saloon — 4 door 2.2D, 2198cc, 107kW / 146hp, QJBA Listed compatible — still match VIN, number and photos
2007 Jaguar X-Type X400 Estate — 5 door 2.2D, 2198cc, 107kW / 146hp, QJBA Listed compatible — still match VIN, number and photos
2008 Jaguar X-Type X400 Saloon — 4 door 2.2D, 2198cc, 107kW / 146hp, QJBA Listed compatible — still match VIN, number and photos
2008 Jaguar X-Type X400 Estate — 5 door 2.2D, 2198cc, 107kW / 146hp, QJBA Listed compatible — still match VIN, number and photos
2009 Jaguar X-Type X400 Saloon — 4 door 2.2D, 2198cc, 107kW / 146hp, QJBA Listed compatible — still match VIN, number and photos
2009 Jaguar X-Type X400 Estate — 5 door 2.2D, 2198cc, 107kW / 146hp, QJBA Listed compatible — still match VIN, number and photos
Additional exact-number evidence — not blanket approval
Documented application What it proves Buying instruction
2004 Jaguar X-Type 2.0 diesel, 96kW, manual donor The exact 4X43-F044J53-AB number has also been recorded on an earlier X-Type donor. Do not assume every 2004–2006 vehicle fits. A VIN, number, connector, console and finish check is required.
Not confirmed / do not order without verification: petrol 2.1, 2.5 or 3.0 variants; 2.0D variants other than the documented donor evidence above; cars outside 2007–2009; left-hand-drive console variants; vehicles with a different part number, connector, socket orientation, mounting tabs, trim finish or centre-console specification; all Jaguar S-Type, XF, XE, XJ, XK, F-Pace and non-X400 models.
Jaguar X-Type X400 four-door saloon body reference
Saloon reference: X-Type X400 four-door body. Exterior specification may vary.
2008 Jaguar X-Type X400 five-door estate body reference
Estate reference: X-Type X400 five-door body. Exterior specification may vary.
Where the Part Fits and What It Does
Jaguar X-Type X400 dashboard and centre-console location reference
X400 interior location reference only. The assembly fits in the lower front centre stack / console area ahead of the gear selector. Year, trim, gearbox and colour shown may differ.
Function
  • Forms the shaped lower centre-console storage/ashtray aperture.
  • Houses the 12V cigar-lighter-style power socket and helps retain it securely.
  • Provides the correct factory contour, mounting points and finish around the opening.
  • It is an interior trim and power-socket housing; it does not control the engine, gearbox or safety systems.
Common reasons for replacement
  • Cracked housing, broken tabs or loose/rattling trim.
  • Scratched, lifting or damaged upper decorative strip.
  • Loose, corroded, heat-damaged or intermittent 12V socket.
  • Plug will not stay secure, accessory loses power, or socket illumination is inoperative.
  • Previous removal damage or an incorrect aftermarket cubby that does not sit flush.
Why Choose an Original Jaguar Factory-Used Part?
  • Correct geometry: factory contours, tabs and aperture shape are designed for the X400 console.
  • Better visual match: ageing, grain and finish are generally closer to the surrounding original trim than a low-cost copy.
  • Electrical integrity: the socket housing and connector layout are built around the vehicle’s original installation.
  • Lower waste: reusing a serviceable component keeps an existing part in circulation and reduces demand for new material.
Depending on the part and current dealer pricing, a quality used component may cost up to 70% less than buying new. This is a potential saving, not a guaranteed percentage for every item.
Fitting Guide
General guidance only — not a replacement for Jaguar workshop information. Interior electrical work should be completed by a competent person. Confirm the correct fuse, connector and polarity before powering the socket.
1
Verify first. Compare 4X43-F044J53-AB, the full shape, finish, tabs, socket position and rear connector with the part removed from your car. Send the VIN through eBay Messages if assistance is needed.
2
Switch off the ignition, remove the key and disconnect the negative battery terminal where the workshop procedure requires it. Be aware that radio settings and stored preferences may be lost.
3
Protect the surrounding veneer and console with a clean cloth. Use plastic trim tools rather than metal levers on visible surfaces.
4
Release the adjacent console trim and any retaining screws/clips in the correct sequence. Do not force the panel; hidden clips can fracture.
5
Withdraw the old assembly carefully and disconnect the 12V socket/illumination connector by its locking tab, not by pulling the wires.
6
Compare both parts side by side. Transfer only any removable insert or small trim piece required by your specification, provided it is serviceable.
7
Connect the replacement, locate all tabs squarely, refit fixings without overtightening and reinstall the surrounding trim.
8
Reconnect power, test with a fused 12V tester or known low-current accessory, then confirm the assembly sits flush and does not rattle.
Typical tools
  • Plastic trim-removal set
  • Torx T20/T25 drivers
  • Small flat screwdriver or pick
  • 8mm/10mm socket, ratchet and extension
  • Multimeter or fused 12V socket tester
  • Protective cloth, gloves and good lighting
Estimated labour time

Approximately 0.5–1.0 hour for a competent technician, depending on trim specification, previous damage and access.

Diagnostic time, wiring repair, broken clips, seized fixings and additional dismantling are not included.

Static Garage Labour Calculator — No JavaScript

Estimated labour cost = garage hourly rate × estimated 0.5–1.0 hour fitting time.

Garage rate 0.5 hour 0.75 hour 1.0 hour
£50/hour £25.00 £37.50 £50.00
£65/hour £32.50 £48.75 £65.00
£80/hour £40.00 £60.00 £80.00
£100/hour £50.00 £75.00 £100.00
£120/hour £60.00 £90.00 £120.00
£150/hour £75.00 £112.50 £150.00

Estimate only: parts, VAT where applicable, diagnostics, wiring repairs and additional work are excluded. We offer fitting and general repair services subject to workshop availability.

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

ThePartPilot — Stock, Fitting and Dispatch
Reference image of automotive components arranged in a workshop
25,000+ parts held in stock and on the shelf at any one time.
Reference image of mechanic working in an automotive repair garage
Fitting and mechanical repair service available subject to capacity and prior booking.
Reference image of boxed goods being loaded for dispatch
Parts are securely packed for tracked UK and eligible international dispatch.
Collections

Collection is available 7 days a week until 8pm by prior appointment, including bank holidays by prior arrangement. Use eBay Messages to arrange collection and wait for confirmation before travelling.

Vehicle purchasing service

We also purchase cars for cash, with nationwide collection and same-day payment subject to inspection, ownership checks, agreed terms and availability. Enquiries must remain through eBay Messages where the conversation begins on eBay.

Worldwide Delivery through eBay Global Shipping Programme

Eligible international buyers see postage, import charges and delivery estimates at checkout. Availability is controlled by eBay and can vary by item, destination, dimensions and local restrictions.

EU destinations currently listed by eBay:
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Non-EU destinations currently listed by eBay:
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
Ordering, VAT, Address and Returns
Buy the correct part first time
  • Check your full 17-character VIN against a Jaguar parts catalogue.
  • Match 4X43-F044J53-AB exactly where possible.
  • Compare the connector, tabs, aperture, socket side and trim colour with the actual photographs.
  • Ask through eBay Messages before purchase when any detail differs.
Delivery address

The checkout address must be complete and correct before payment. For transaction security, we cannot redirect the parcel or change the delivery address after checkout.

Global Accounting VAT treatment

Where applicable, VAT is accounted for under the Global Accounting VAT margin scheme. VAT is not shown separately on the sales invoice and no separately itemised input VAT is available to reclaim.

Returns

Returns are handled under the return terms displayed on the eBay listing and eBay buyer-protection rules. The exact item must be returned complete, unaltered, securely packed and in the condition received. Parts must not be installed for a test fit and then returned as unused.

A refund deduction is considered only where eBay permits it and only to reflect documented loss in value caused by use, installation, damage, missing parts or poor return packaging.

Support a Local Parts Business — Reuse Before Replacing

🚗 Buying a quality used component supports a specialist local business, keeps usable parts in circulation and helps reduce the energy, raw materials, packaging and transport associated with manufacturing a new replacement.

♻️ Every correctly matched part is a practical step towards lower waste. Thank you for choosing reuse, supporting skilled dismantling and helping keep vehicles on the road.

You may also like