Jaguar XF X250 2008-2015 Saloon Rear Right Complete Door Free Postage C2Z2013
Fits the right-hand rear door aperture when viewed in the normal direction of travel.
UK right-hand-drive vehicle: rear driver side / offside / OSR.
Left-hand-drive vehicle: rear passenger side, still the vehicle's right-hand side.
The reference vehicle is the correct X250 four-door saloon body style. It is not a Sportbrake estate.
| Vehicle Make / Model | Jaguar XF, first generation X250 |
| Exact UK Registration Years | 2008, 2009, 2010, 2011, 2012, 2013, 2014 and 2015 — X250 only |
| Body Style | Four-door saloon only |
| Placement | Rear right / offside / OSR |
| Part Type | Complete door assembly as shown in the listing photographs |
| Catalogue Panel Reference | C2Z2013 — Jaguar catalogue reference for the RH rear four-door saloon door panel assembly |
| Manufacturer Part Number | No complete-door assembly number is visible in the supplied photographs. C2Z2013 is the body-panel catalogue reference, not a guarantee that every attached electrical or trim component shares one number. |
| Interchange Part Number | No cross-model interchange number confirmed |
| Superseded Part Number | No confirmed superseded number for the complete assembly |
| Related Door-Skin References | C2Z2015 to VIN U22370 and C2Z30219 from VIN U22371 — skin references only, not the complete assembly |
| Colour Marking | Silver / pale blue-grey appearance. Exact Jaguar paint code is not visible or verified. Colour matching is not guaranteed and refinishing may be required. |
| Interior Trim | Black trim with gloss wood-effect insert as pictured. Exact trim code is not verified. |
| Visible Components | Door shell, exterior handle, moving glass, fixed quarter glass, inner trim/card, bright trim, weather seals, speaker grilles and wiring connector are visible. Unseen internals are not separately identified or guaranteed beyond the photographs. |
| Visible Stock Marking | D6002 written on the glass — this is a stock/yard marking, not a Jaguar part number |
| Condition | Previously fitted recycled factory part. Visible dust, storage marks, scratches and scuffs are present; inspect every photograph before ordering. |
| Warranty | 30 days, subject to the listing terms |
| eBay Item Number | 147412109590 |
| VAT Information | Sold under the VAT Global Accounting / second-hand margin scheme. VAT is not separately itemised and no reclaimable VAT invoice is available. |
| Make | Model / Chassis | Body | Years | Position | Fitment Guidance |
|---|---|---|---|---|---|
| Jaguar | XF X250 | 4-door saloon | 2008 | Rear right | Body-panel fit confirmed; match attached trim/electrics |
| Jaguar | XF X250 | 4-door saloon | 2009 | Rear right | Body-panel fit confirmed; match attached trim/electrics |
| Jaguar | XF X250 | 4-door saloon | 2010 | Rear right | Body-panel fit confirmed; match attached trim/electrics |
| Jaguar | XF X250 | 4-door saloon | 2011 | Rear right | Body-panel fit confirmed; match attached trim/electrics |
| Jaguar | XF X250 | 4-door saloon | 2012 | Rear right | Body-panel fit confirmed; transfer/match trim and wiring if required |
| Jaguar | XF X250 | 4-door saloon | 2013 | Rear right | Body-panel fit confirmed; transfer/match trim and wiring if required |
| Jaguar | XF X250 | 4-door saloon | 2014 | Rear right | Body-panel fit confirmed; transfer/match trim and wiring if required |
| Jaguar | XF X250 only | 4-door saloon | 2015 | Rear right | Confirm X250 chassis; does not fit the newer X260 introduced in 2015 |
Uses a different rear door panel assembly.
Different generation, body shell and door shape.
No cross-model interchange confirmed.
This listing is for rear right only.
Transfer your matching loom, lock, regulator, speaker, handle, glass or trim where necessary.
Paint fades and shades vary; use the colour code and expect refinishing for a perfect match.
The rear-right door closes and secures the passenger compartment, supports the moving window and fixed quarter glass, carries the exterior and interior handles, houses the latch/lock system and provides mounting points for the regulator, wiring, trim and speaker equipment where fitted.
Correct fit and alignment are important for passenger access, central locking, window operation, weather sealing, wind-noise control, drainage, side protection and consistent panel gaps.
Dents, creases, corrosion, impact damage or poor previous repair.
Latch, actuator, handle or alignment problems can prevent secure closure.
Glass stuck, dropping, rattling, moving slowly or failing to seal.
Damaged frame, seals, alignment or glass channels may cause leaks and noise.
Window, speaker, lighting or locking faults can result from door wiring damage.
Worn hinges, check strap, loose trim or misalignment can create knocks and rattles.
- Confirm specification first: compare shell shape, side, glass, trim, handle, lock, speaker, wiring connector and options before removing your original door.
- Prepare the vehicle: park on level ground, switch off the ignition, keep the key away from the vehicle and disconnect the battery negative terminal in accordance with the vehicle workshop procedure.
- Protect all surfaces: cover the sill, quarter panel, B-pillar and adjacent paintwork with padded blankets and masking tape.
- Support the door: position a padded door stand or lifting table under the door. Do not rely on one person to hold the assembly.
- Disconnect electrics: release the body-to-door multi-pin connector without pulling on the wires. Inspect both connectors for damage, moisture or bent pins.
- Mark alignment: mark the hinge positions with masking tape or a paint-safe marker so the original alignment can be used as a starting point.
- Release the check strap and hinges: remove the check-strap fixing and hinge fasteners while the door is fully supported.
- Transfer parts where required: move your matching loom, lock/latch, regulator, motor, speaker, handle, glass, seals or trim if the supplied equipment differs from your VIN specification.
- Install and align: fit the replacement door, set even panel gaps and adjust the striker only where necessary. Tighten all fixings to the Jaguar workshop-manual specification; no torque values are guessed here.
- Reconnect and test: reconnect the battery and check latching, central locking, window travel, anti-trap/one-touch operation, speaker, lights, weather seals, drainage and door-open indication. Carry out the approved window initialisation procedure if required.
- Final inspection: water-test the seals and recheck hinge/striker tightness, panel gaps and cable clearance after the first road test.
Padded stand, lifting table or two-person lift.
Metric socket/spanner set, ratchet and extensions.
Plastic trim levers, Torx-bit set and screwdrivers.
Torque wrench and the correct workshop specifications.
Masking tape, paint-safe marker and measuring rule.
Multimeter/diagnostic equipment where required.
Typical time guide: approximately 1.5-2.5 hours for a like-for-like complete-door swap and alignment. Allow approximately 3-5 hours where trim, lock, regulator, glass, wiring or other components must be transferred. Paint and body preparation are additional.
| Labour Time | At £60/hr | At £80/hr | At £100/hr | At £120/hr |
|---|---|---|---|---|
| 1.5 hours | £90 | £120 | £150 | £180 |
| 2.0 hours | £120 | £160 | £200 | £240 |
| 2.5 hours | £150 | £200 | £250 | £300 |
| 3.0 hours | £180 | £240 | £300 | £360 |
| 4.0 hours | £240 | £320 | £400 | £480 |
| 5.0 hours | £300 | £400 | £500 | £600 |
Illustrative labour only. Garage rates, diagnosis, paint, materials, seized fasteners, coding and additional repairs vary. This is not a fixed quotation.
Designed around the X250 saloon aperture, hinges, latch position, glazing and seals.
Retains the mounting points and component layout developed for the vehicle.
Depending on current retail prices, a recycled assembly may save up to 70% versus sourcing new components separately. Paint and labour are additional and savings are not guaranteed.
A complete assembly as pictured can reduce the number of separate parts needed, subject to specification matching.
Photographs, body style, side, VIN and connector checks help avoid low-cost pattern-part alignment problems.
Keeps a serviceable vehicle component in use and reduces unnecessary waste.
Free UK postage: included where shown on the eBay checkout for this listing. International postage and any import charges are calculated by eBay and are not free.
eBay Global Shipping Programme: offered only where this item remains eligible and the buyer's destination is shown at checkout. Availability can depend on packed dimensions, weight, destination and eBay restrictions.
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.
The country list and item eligibility are controlled by eBay and can change. The destination and charges displayed in the buyer's checkout take priority.
Check the full delivery address before paying. Orders can only be dispatched to the address supplied by eBay at checkout. The address cannot be manually changed after payment; an incorrect order may need to be cancelled and repurchased.
Returns are handled under the listing's eBay return settings and applicable law. The item must be returned complete and in the same condition. Any refund deduction is considered only where eBay permits it and only to reflect actual loss in value where an item is returned altered, fitted, damaged, incomplete or in a different condition.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.