Kia Sportage 2017-2022 Front Right Driver Side Wing Fender Panel RH O/S

Vehicle registration and automated eBay compatibility information alone are not sufficient for a body-panel purchase. Compare the photographs, mounting points, contours, lamp/bumper interfaces and any stamped identification on your existing panel. Where available, send your 17-character VIN through eBay Messages before purchasing so the application can be checked against vehicle-specific information.

Compatibility Reference

🚙 Body Variant Check

Do not identify this panel simply by counting doors or assuming a visually similar Sportage uses the same front wing. The source listing does not provide verified 3-door/5-door, chassis-code, facelift or VIN-break data.

Use the listing photographs and vehicle VIN to establish the correct application.

WILL NOT FIT / EXCLUSION LIST

This listing should be treated as NOT COMPATIBLE where any of the following differs from the photographed component:

• Left-hand / passenger-side wing required.
• Mounting-hole pattern differs.
• Headlamp or bumper mating profile differs.
• Wheel-arch contour differs.
• Body-line pressing differs.
• Side trim / indicator / moulding provision differs.
• A different stamped part-number suffix is required.
• A VIN-specific parts catalogue identifies a different panel.

No unverified facelift, chassis or engine exclusions are being invented in this listing.

What This Component Does

This is the exterior front-right body wing/fender panel. It forms the outer body surface surrounding the front-right wheel area and interfaces visually and physically with adjacent front-end bodywork.

Its functions include enclosing the wheel-arch area, maintaining the intended exterior body profile and providing the designed mounting/interface points with surrounding body components. Unlike an electronic module, the wing does not electronically control the vehicle's systems.

A factory-manufactured used panel can offer advantages over inexpensive reproduction panels because the original production component was manufactured for the vehicle's intended panel geometry, mounting arrangement and adjoining body-line profile.

♻ Premium Used Component

This is a previously used automotive body component. Used panels may display storage marks, scratches, chips, small dents, previous paintwork or other age-related cosmetic imperfections.

Please inspect every supplied high-resolution listing photograph before ordering. Painting, preparation or refinishing may be required to achieve your desired cosmetic finish.

WHY BUY PREMIUM USED?

Used factory-manufactured components can deliver excellent value while avoiding the compromises sometimes associated with low-cost reproduction parts. Reusing serviceable automotive components also extends their working life and reduces demand for replacement manufacturing.

🔧 Typical Installation Overview

Professional bodyshop installation is recommended. The procedure below is general guidance only; exact fasteners and removal sequence must be confirmed from vehicle-specific repair information.

1. Park securely, switch the ignition off and protect adjacent painted panels.
2. Raise the relevant corner safely where wheel-arch access requires it.
3. Remove the wheel if required for liner access.
4. Remove relevant wheel-arch liner fasteners/clips.
5. Remove obstructing trim components only where necessary.
6. Locate and remove the wing's accessible factory fasteners.
7. Support the panel and carefully release it without damaging adjoining paintwork.
8. Compare the replacement panel against the removed component before final installation.
9. Trial-fit and establish bonnet, door, headlamp and bumper-area panel gaps.
10. Tighten fasteners in accordance with vehicle-specific repair information.
11. Refit liners, trim and wheel where removed.
12. Perform a final alignment, clearance and fastening inspection.

Typical Tools

Metric socket set • ratchet/extensions • trim-removal tools • screwdrivers • Torx tools where applicable • panel protection tape • suitable lifting equipment/axle stands where required • torque wrench.

Estimated Labour Cost Matrix

Illustrative garage labour only, using the 1.5–2.5 hour planning range above.

Estimates exclude paintwork, materials, VAT charged by third-party repairers and additional repairs.

We also offer professional fitting directly at our repair facility, subject to workshop availability. Please contact us through eBay Messages for availability and details.

Engines • gearboxes • body panels • electrical components • interior parts • suspension • drivetrain • trim and much more.

📦 Shipping & Dispatch

Postage is not free. Buyers pay the shipping charge calculated/shown by eBay for the order.

Where available for the destination and listing, international orders are handled through eBay's international shipping facilities. Availability, charges, customs processing and eligible destinations are determined at checkout.

Potential destination regions can include the UK, Europe, USA, Australia and Canada, subject to the shipping service actually offered by eBay for this item and destination.

Returns & Correct-Part Verification

Please prevent unnecessary returns by checking the photographs, side/position, dimensions, mounting arrangement and any visible stamped identification before purchase.

Automated compatibility/item-specific information should be treated as a useful reference rather than a substitute for checking the actual component.

Returns are handled according to the return terms displayed by eBay and applicable consumer law. Where an eligible returned item has been used, altered, damaged or otherwise suffered a loss in value, a deduction may be made from the refund where permitted by eBay policy and applicable law.

VAT Margin Scheme

Where this sale qualifies for the Global VAT Margin Scheme for used goods, VAT is not separately itemised and therefore cannot be reclaimed from the invoice.

♻️ A Smarter, Greener Repair 🌍

Every serviceable high-grade automotive component that returns to the road is one less usable part unnecessarily discarded. Choosing recycled vehicle parts can reduce demand for new raw materials, manufacturing, packaging and associated transport. 🌱

Your purchase also supports a growing UK automotive recycling business and helps us continue recovering, inspecting and reusing valuable components instead of treating them as waste. Thank you for supporting smarter automotive recycling. 💚🔧🚙

Please verify the exact component before purchase. Vehicle production changes can occur within a model year.