KIA SPORTAGE MK4 QL 2016-2021 5DR RIGHT REAR COMPLETE DOOR GREY FREE POSTAGE
Kia Sportage Mk4 QL/QLE 2016-2021 5-Door Right Rear Complete Door in Grey
This is the COMPLETE RIGHT REAR DOOR: the rear door on the UK driver's side, fitted behind the driver's seat and immediately in front of the right rear wheel. The safest UK title range is 2016-2021 Kia Sportage Mk4 QL/QLE, 5-door SUV. A vehicle first registered in 2022 must be checked by body code and shape: this part is only suitable where the vehicle is still the older QL/QLE body. It does not fit the fifth-generation NQ5 body.
Actual complete-door photographs
The four photographs below are this listing's own eBay-hosted item images. They are shown without added text, logos, borders or watermarks so the visible condition and included components remain clear.
Item details and supplied condition
Part-number research and matching
| Reference | What it means | Use for this item |
|---|---|---|
| 77004 | Kia catalogue part-code group used for a right rear door panel assembly | Useful family reference only |
| 77004-D9000 | Catalogue reference listed for a right rear Sportage QL door shell in some markets | Comparison reference - not visible on this item |
| 77004-F1000 | European cross-reference seen for a Sportage QL/QLE right rear door/panel | Comparison reference - not confirmed on this item |
| 77004-R2000 | Later NQ5-generation right rear door reference | Different generation - not this part |
| Superseded number | No confirmed superseded number can be verified from the supplied photographs | Do not add one without a label or VIN catalogue check |
Exact compatibility guide
| Vehicle | Years | Body / side | Status | Fitment note |
|---|---|---|---|---|
| Kia Sportage Mk4 QL/QLE | 2016, 2017, 2018, 2019, 2020, 2021 | 5-door SUV; right rear; UK driver side | FITMENT TARGET | Match body shape, fixed quarter-glass outline, paint requirement and supplied hardware before ordering. |
| Kia Sportage Mk4 QL/QLE with a 2022 registration | 2022 only where still QL/QLE | 5-door SUV; right rear | VIN / PHOTO CHECK REQUIRED | Some late registrations may be the older body. Do not order by registration year alone. It must match the QL/QLE guide and actual item photographs below and must not be NQ5. |
| Non-UK / left-hand-drive Sportage QL | Market dependent | Right rear becomes passenger side on LHD vehicles | CHECK BEFORE ORDER | Door shell shape may correspond, but glass tint, locks, wiring, trims and connectors can vary by market and specification. |
| Kia Sportage Mk3 SL | 2010-2015 | Any body/side | DOES NOT FIT | Different door shape, glass frame and body aperture. |
| Kia Sportage Mk5 NQ5 | 2022 onward | Any body/side | DOES NOT FIT | Completely different fifth-generation body. A 2022 plate does not prove QL fitment. |
| Kia Sportage QL left rear / UK passenger side | All | Left rear | DOES NOT FIT | This listing is for the opposite side. |
| Front door or tailgate | All | Front / rear hatch | DOES NOT FIT | Different component and mounting points. |
| Other Kia or Hyundai models | All | Any | NO CONFIRMED CROSS-FIT | No other vehicle model is confirmed from the photographs or catalogue references. Do not buy for a Tucson, Sorento, Niro, Ceed or another model without exact manufacturer catalogue confirmation. |
Vehicle position and generation guide
Use these two static guides together with the actual item photographs. This part is the complete right rear door on a 5-door Sportage QL/QLE: behind the UK driver's door and immediately ahead of the right rear wheel.
Complete right rear door Rear wheel
The rear door is between the front door and rear wheel. It includes the upper window frame and the small fixed quarter-glass section where shown in the actual photographs.
QL/QLE 5-door
FITMENT TARGET
QL/QLE only
VIN/PHOTO CHECK
DIFFERENT DOOR
DOES NOT FIT
Do not order by registration year alone when the vehicle is registered in 2022. Confirm the older QL/QLE body shape and compare the fixed quarter-glass outline, frame, handle and door edges.
Where this part is fitted and what it does
The pressed door structure also provides the correct hinge and latch geometry and contributes to the vehicle's side structure. After impact damage, the surrounding sill, B-pillar, wheel arch, hinges and latch post should be checked by a competent body-repair technician before fitting a replacement door.
Common symptoms and reasons for replacement
- Impact damage, deep dents, creasing, corrosion or distorted mounting points.
- Door difficult to open, close or latch, or visibly uneven panel gaps.
- Wind noise or water ingress caused by a distorted frame or poor seal contact.
- Rattling, window binding or glass alignment problems after door damage.
- Intermittent locking, child-lock, speaker or window operation where the loom or internal hardware is damaged.
A replacement complete door will not cure an electrical or mechanical fault where the vehicle-side wiring, switch, control module or another related component is the true cause. Diagnose the fault and compare the supplied door specification before installation.
Why choose a factory-produced used panel?
- Original factory hinge, latch, glass-frame and trim mounting geometry.
- Usually less fabrication and alignment work than a low-cost pattern panel.
- Existing factory apertures and reinforcement locations help retain correct component positioning.
- A used factory panel can be substantially less expensive than buying the equivalent new assembly.
- Selected used parts can offer savings of up to 70% against equivalent new retail prices; actual savings vary by part, condition and market price.
- Reusing a serviceable component keeps material in circulation and reduces demand for manufacturing a replacement from new.
Fitting instructions, tools and repair time
Required tools
Typical fitting sequence
- Confirm QL/QLE body code, right-rear side, paint requirement and exact supplied components before dismantling the vehicle.
- Park on level ground, switch the ignition off and isolate the negative battery terminal in accordance with the vehicle repair procedure.
- Protect the sill, quarter panel and adjacent paint. Support the old door securely with a padded stand or helper.
- Remove the interior trim and moisture barrier only as required. Disconnect the door loom and any lock, speaker, window or handle connections. Photograph routing before removal.
- Mark the original hinge positions. While the door is fully supported, disconnect the check strap and remove the hinge fasteners. Lift the old door away without loading the hinges or body aperture.
- Transfer any required glass, regulator, motor, latch, loom, speaker, trim, seals, clips and fittings. Replace damaged clips and sealing material rather than reusing failed pieces.
- Offer the replacement door to the vehicle, refit the hinges and check strap, reconnect the loom and tighten fasteners to the correct Kia workshop data. Do not guess torque values.
- Align the door for even gaps and flushness, then check latch engagement. Test central locking, child lock, window, speaker, courtesy functions and water sealing before final trim installation.
Times are general workshop estimates only. Corrosion, accident damage, broken clips, wiring faults, paintwork and difficult alignment can add substantial time.
Static garage labour estimator - no JavaScript
Use the row closest to the expected repair time. Calculation: hourly labour rate x labour hours.
| Labour time | £60/hour | £80/hour | £100/hour | £120/hour |
|---|---|---|---|---|
| 1.5 hours | £90 | £120 | £150 | £180 |
| 2 hours | £120 | £160 | £200 | £240 |
| 2.5 hours | £150 | £200 | £250 | £300 |
| 3 hours | £180 | £240 | £300 | £360 |
| 4 hours | £240 | £320 | £400 | £480 |
| 5 hours | £300 | £400 | £500 | £600 |
Labour only. Excludes paint, materials, diagnostics, body correction, replacement clips/seals, collection/delivery, taxes and any additional repairs.
Fitting service - subject to availability
A fitting service may be available by prior arrangement.
- Availability, labour price and timescale must be confirmed before purchase or travel.
- Paintwork, transfer of internal components and body alignment are assessed separately.
- Send the registration/VIN, photographs and required work through eBay Messages.
- Do not travel to us until an appointment has been confirmed through eBay.
Postage, GSP and checkout address
Important address rule: we dispatch only to the delivery address supplied in the completed eBay order. Check the full name, postcode, property number and country before paying. We cannot manually change the checkout address after purchase.
GSP availability: eBay decides item and country eligibility at checkout. Size, weight, category, local import restrictions and programme changes can affect availability. The current eBay GSP country list is:
Other destinations: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
Country and item eligibility can change. The options and price shown by eBay at checkout are the final authority for a particular order.
Returns, condition protection and warranty
- The listing states a 30-day return period and 30-day seller warranty.
- Check fitment before painting, modifying, dismantling or installing the part.
- Returned items should be the exact supplied item, in the same condition, with all security marks and supplied components intact.
- Parts should not be installed, altered, painted, stripped, damaged or returned with missing components unless the return reason and applicable rights require otherwise.
- Any refund deduction is limited to a qualifying loss in value and will only be made where eBay policy and applicable law permit it; it is not an automatic restocking charge.
- For transit damage or a listing issue, contact us promptly through eBay Messages and provide clear photographs of the packaging, item and issue.
Our stock and dispatch process
ThePartPilot focuses on accurate identification, careful handling and clear fitment information so buyers can order the correct component first time.
Final buyer checklist
- My vehicle is a Kia Sportage Mk4 QL/QLE 5-door.
- I need the UK driver's-side RIGHT REAR COMPLETE DOOR.
- My vehicle is not a fifth-generation NQ5.
- The door outline and quarter-glass shape match my original.
- I have checked what is and is not visibly included.
- I understand the paint code/shade is unconfirmed.
- I have inspected all marks in the actual photos.
- I will transfer unconfirmed internal parts if required.
- My eBay checkout delivery address is correct.
- I have requested fitment help through eBay Messages if uncertain.
Support a local small business and reuse quality parts
Reusing a serviceable vehicle component keeps useful material in circulation, can reduce demand for a newly manufactured replacement and helps extend the working life of existing vehicles. Every correct-fit order supports a local specialist business, skilled dismantling, careful stock management and responsible reuse. Thank you for choosing ThePartPilot.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.