KIA SPORTAGE QL MK4 1.6 1.7 2.0 CRDi DIESEL FILLER NECK 2016-2021 31030F1900

KIA SPORTAGE QL MK4 1.6 1.7 2.0 CRDi DIESEL FILLER NECK 2016-2021 31030F1900

£24.10
Skip to product information
KIA SPORTAGE QL MK4 1.6 1.7 2.0 CRDi DIESEL FILLER NECK 2016-2021 31030F1900

KIA SPORTAGE QL MK4 1.6 1.7 2.0 CRDi DIESEL FILLER NECK 2016-2021 31030F1900

£24.10
THEPARTPILOT

KIA SPORTAGE QL / MK4
DIESEL FUEL FILLER NECK

2016–2021 UK QL five-door diesel family • 1.6 CRDi • 1.7 CRDi • 2.0 CRDi
Fitment-first listing — VIN verification available through eBay Messages
⚠️ IMPORTANT PART-NUMBER CHECK
This photographed item is a DIESEL fuel filler-neck assembly. Do not match this diesel item using 31030-F1000; that reference belongs to the petrol/unleaded application. The diesel QL catalogue family uses 31030-F1900, but the numeric label on this exact used unit must still be physically or VIN verified before that number is treated as confirmed.
Vehicle Family Kia Sportage QL / Mk4
Body Style Five-door SUV
Fuel Diesel / CRDi
UK Search Years 2016–2021
Part Type Fuel filler-neck assembly / pipe
Condition Used original-production component

Actual Item Photographs

These are photographs from the item listing. Please compare the complete shape, brackets, hose branches, connectors and filler opening with the part currently fitted to your vehicle.

Kia Sportage QL diesel fuel filler neck actual item
ACTUAL ITEM — DIESEL marking visible
Kia Sportage diesel filler neck actual part
ACTUAL ITEM — compare complete pipe shape
Kia Sportage filler neck hose and bracket detail
ACTUAL ITEM — hose / bracket detail
Kia Sportage filler neck material and manufacturer marking
ACTUAL ITEM — moulded material / maker markings

🚗 Where Is This Part Fitted?

The fuel filler neck sits behind the vehicle's rear-quarter fuel-filler opening and routes downward toward the fuel tank. It carries diesel from the filling point into the tank and supports the associated filler / breather routing during refuelling.

Reference Vehicle — Correct QL Five-Door Body Family

REFERENCE VEHICLES ONLY — NOT THE DONOR VEHICLE AND NOT INCLUDED.
The exterior photographs below are included to identify the Kia Sportage QL / Mk4 five-door body generation. An exterior photograph alone cannot prove engine or diesel filler-neck fitment, so final compatibility remains VIN / part-number / physical-shape dependent.
Kia Sportage QL five door side body reference
QL FIVE-DOOR BODY REFERENCE — fuel filler is located in the rear-quarter area
Kia Sportage QL five door exterior reference
KIA SPORTAGE QL / MK4 BODY-GENERATION REFERENCE

What The Fuel Filler Neck Does

Primary Function Routes diesel safely from the external filler opening down to the vehicle's fuel tank during refuelling.
Breather / Vent Routing The assembly works with the associated vent and breather connections so air can be displaced correctly as fuel enters the tank.
Sealed Fuel Path Correct hose, clamp and neck condition helps maintain a properly contained fuel path.
Important This is primarily a mechanical fuel-routing component. It does not electronically control the engine.

Parts Compatibility Chart

✅ FITMENT RULE: Never order using registration year alone. The safest check is the vehicle's 17-character VIN + existing part shape + part-number family. If uncertain, contact us through eBay Messages before ordering.
UK Year / Phase Vehicle Diesel Engine Fitment Position
2016–2018
Pre-facelift
Kia Sportage QL / Mk4
5-door SUV
1.7 CRDi
1,685cc • 115PS
QL diesel family
VIN confirmation required
2016–2018
Pre-facelift
Kia Sportage QL / Mk4
5-door SUV
2.0 CRDi
1,995cc • 136PS
QL diesel family
VIN confirmation required
2016–2018
Pre-facelift
Kia Sportage QL / Mk4
5-door SUV
2.0 CRDi
1,995cc • 185PS
QL diesel family
VIN confirmation required
Late 2018–2019
Facelift
Kia Sportage QL / Mk4
5-door SUV
1.6 CRDi
1,598cc • 114 / 134 BHP
QL diesel family
VIN confirmation required
Late 2018–2019
Facelift
Kia Sportage QL / Mk4
5-door SUV
2.0 CRDi 48V
1,995cc • approx. 182 BHP
QL diesel family
VIN confirmation required
2020–2021
Late QL facelift
Kia Sportage QL / Mk4
5-door SUV
1.6 CRDi 48V
1,598cc • 134 BHP
QL diesel family
VIN confirmation required

Vehicles / Applications This Listing Must NOT Be Assumed To Fit

  • Petrol Kia Sportage QL models — 31030-F1000 is a petrol/unleaded reference.
  • Kia Sportage SL / Mk3 — previous generation.
  • Kia Sportage NQ5 / Mk5 — later generation.
  • 2022-on Sportage vehicles should not automatically be treated as QL. If a vehicle has a 2022 registration but is claimed to be a late QL, provide the VIN.
  • Do not assume Hyundai Tucson or other Kia/Hyundai vehicles cross-fit without catalogue/VIN proof.
  • Do not order where the neck shape, branch hoses, mounting brackets or connection positions differ.
  • Do not rely solely on eBay's automatically generated vehicle suggestion or registration year.

Part Number Verification

31030-F1000 DO NOT USE FOR THIS DIESEL LISTING

This catalogue reference corresponds to the petrol / unleaded filler-neck application.

31030-F1900 DIESEL QL CATALOGUE REFERENCE

This is the diesel filler-neck catalogue family reference found during our check. The exact used unit should still be verified from its physical label or donor VIN before this is entered as its confirmed MPN.

No additional vehicle cross-reference or superseded number has been added unless independently verified. We do not guess part numbers.

Physical Construction / Material

Construction Mixed metal fuel-neck tubing with moulded polymer / elastomer sections and vehicle-specific mounting / hose interfaces.
Visible Material Marking The photographed moulded section carries a PA66-EPDM material marking. The precise alloy / grade of the metal tube has not been assumed.

Symptoms A Faulty Filler Neck May Cause

  • Diesel smell around the filler area, especially after refuelling.
  • Visible wetness, seepage or fuel leakage around the neck / hose joints.
  • Corrosion, cracking or physical damage to the filler pipe.
  • Damaged mounting brackets or movement in the filler-neck assembly.
  • Perished, split or loose connected hoses / clamps.
  • Slow or awkward refuelling where the associated vent / breather path is restricted.
  • Fuel nozzle repeatedly shutting off during filling where a venting fault is present.
⛽ SAFETY: A confirmed fuel leak should be treated seriously. Avoid driving a vehicle with an active leak and have the fuel system inspected / repaired by a competent technician.

Why Choose A Correctly Matched Original-Production Used Part?

Vehicle-Specific Geometry Designed around the original mounting points, tube routing, filler opening and tank connection.
Correct Interfaces Helps preserve the intended hose diameters, branch positions, brackets and connection layout when matched to the correct VIN.
Used-Part Value A serviceable used component can offer substantial savings compared with buying a new equivalent. Compare current prices for the same verified part number.

Low-cost aftermarket replacements can vary in construction, routing and bracket detail between manufacturers. That does not make every alternative unsuitable, but it makes part-number and physical-shape verification especially important.

🔧 Fitting Information

General workshop guidance only. Fuel-system work should be carried out by a competent technician using the appropriate Kia workshop information for the exact VIN.

Typical Tools Required

  • Vehicle lift or correctly rated jack and axle stands
  • Wheel chocks
  • Metric socket / spanner set
  • Screwdrivers
  • Trim / arch-liner clip tools
  • Hose-clamp pliers
  • Inspection lamp
  • Drain tray / fuel-safe absorbent material
  • Suitable gloves and eye protection
  • Correct workshop information for the VIN

General Replacement Sequence

  1. Verify first: compare the replacement with the removed unit and confirm VIN, filler opening, bracket pattern, hose branches and tank connection.
  2. Work with the vehicle cold in a well-ventilated area away from flames, sparks and ignition sources.
  3. Reduce fuel level where appropriate and isolate the vehicle in accordance with the correct service procedure.
  4. Raise and support the vehicle safely. Remove the wheel / arch-liner components if required for access.
  5. Photograph or mark the original filler, vent and breather routing before disassembly.
  6. Release the relevant clamps, hoses and mounting fasteners without damaging adjoining lines.
  7. Remove the old neck and directly compare all bends, ports, hose sizes and mounting points.
  8. Inspect connected hoses, seals and clamps and renew any degraded items where required.
  9. Install using the original routing. Use manufacturer workshop torque values for the exact VIN; no generic torque figure is assumed here.
  10. Reassemble the arch / trim components and perform a careful leak check before returning the vehicle to use.
Estimated workshop labour: approximately 1.0–1.5 hours under normal access / fastener conditions. Corrosion, damaged hoses, seized clamps or additional diagnosis may increase labour. This is a planning estimate, not a Kia factory flat-rate time.

Garage Labour Cost Calculator — No JavaScript

Formula: hourly labour rate × estimated 1.0–1.5 hours. Labour only; parts, diagnosis, VAT where applicable and consumables are additional.

Garage Rate Approx. 1.0 hr Approx. 1.5 hrs
£50 / hour £50 £75
£60 / hour £60 £90
£75 / hour £75 £112.50
£90 / hour £90 £135
£100 / hour £100 £150
£120 / hour £120 £180
£150 / hour £150 £225
25,000+ PARTS IN STOCK
7 DAYS COLLECTION BY APPOINTMENT
🔧 FITTING SUBJECT TO AVAILABILITY
Workshop / Fitting Service We also offer fitting and repair services subject to workshop availability. Please enquire through eBay Messages before travelling or purchasing specifically on the basis of fitting availability.

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

📦 Delivery, Checkout & International Shipping

Professionally prepared for dispatch from our stocked parts operation.
CHECK YOUR DELIVERY ADDRESS BEFORE PAYMENT.
We can only dispatch to the delivery address selected during eBay checkout. Please check it carefully before completing the order. We cannot manually change or redirect the checkout address after purchase.

International Delivery

International delivery is offered through the eBay international-shipping programme available to the buyer at checkout. eBay is transitioning UK sellers from the Global Shipping Programme to eBay International Shipping, so the destination and service displayed at checkout are always the final authority. Individual item, carrier or seller restrictions can override the general programme list.

Published GSP destination coverage includes:

Europe: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

Other supported destinations: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Islands, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.

Important: availability changes and individual listing restrictions apply. If a destination is not shown as available during eBay checkout, we cannot override the eBay shipping service from the description.

Returns & Fitment

Returns are handled in accordance with the return policy displayed on this eBay listing. Please return the same item in the condition supplied, complete with any security identification and components originally included.

Where eBay permits it, a deduction of up to 50% may apply only where the returned item has suffered an actual loss in value because it has been used, altered, damaged, returned incomplete or inadequately packaged. This is not an automatic restocking charge.

To avoid an incorrect order, please request a VIN / image / part-number check through eBay Messages before purchase whenever there is any uncertainty.

VAT Information

Where this qualifying used part is sold under the VAT Global Accounting / second-hand margin scheme, VAT is accounted for under the applicable margin rules and is not shown as a separately reclaimable VAT amount.

♻️ Buy Used • Reuse More • Support Small Business

A correctly matched serviceable used component keeps an existing part in productive use and can reduce the need for another newly manufactured replacement.
🌍 Reuse & Recycling Choosing a serviceable used vehicle component helps keep usable material in circulation for longer and helps reduce avoidable automotive waste.
🤝 Supporting A UK Small Business Your order supports an independent UK automotive-parts business focused on supplying correctly identified used parts and helping customers buy the correct component first time.
📦 Stocked & Ready With more than 25,000 parts stocked and on the shelf at any one time, our goal is efficient identification, preparation and dispatch.
✅ Fitment Before Guesswork Vehicle registration data and marketplace item specifics can be wrong. We prioritise the VIN, physical item photographs, visible part number and component shape.
NOT SURE IT FITS?
Send the vehicle's complete 17-character VIN through eBay Messages before purchase. Where useful, also send a clear photograph of the original part / label. We would rather verify first than send the wrong component.

You may also like