KIA Stinger CK 2017-2023 Right Side Skirt Sill Moulding Red 87752-J5300
KIA Stinger CK 2017-2023 Right Side Skirt Sill Moulding Red 87752-J5300
Correct manufacturer catalogue number
| Brand | Kia |
| Model | Stinger |
| Chassis / Platform | CK |
| Fitment Years | 2017-2023 |
| Body Style | 5-Door Fastback |
| Part Type | Exterior Side Skirt / Side Sill / Rocker Moulding Assembly |
| Manufacturer Part Number | 87752-J5300 |
| Colour-Specific Reference | 87752-J5300H4R |
| Interchange / Cross Reference | 87754-J5300 |
| Superseded / Replacement Number | 87752-J5300H4R → 87752-J5300 |
| Placement | Right-Hand Side |
| UK RHD Position | Driver Side |
| Colour | HiChroma Red |
| Paint / Colour Code | H4R |
| Visible Construction | Moulded automotive plastic / composite exterior trim with painted body-colour finish. Exact polymer resin grade has not been verified. |
| Source Vehicle | 2017 Kia Stinger GTS, RHD |
| Seller Warranty | 30 Days |
| eBay Item Number | 147507396339 |
Inspect the exact component before ordering
The photographs below show the actual component from the source listing. Please compare the complete exterior profile, reverse fixing arrangement, mounting channels, clips, tabs, colour and end shapes with the part currently fitted to your car.
Where the part fits & what it does
Structural Location
This component mounts along the lower exterior right-hand sill / rocker area, directly beneath the side doors.
On a UK right-hand-drive Stinger, the right side is the driver side.
This is the exterior moulding assembly rather than the welded structural metal sill itself.
Vehicle Systems Controlled
None. This is an exterior body trim component rather than an electrical controller, sensor, actuator or mechanical control unit.
Its role is to complete the vehicle's lower body profile, cover the sill area, support the designed exterior appearance and provide limited shielding against normal road spray and light debris.
STATIC FITMENT POSITION REFERENCE
Diagram is an orientation aid only. Compare the actual product photographs and part numbers before purchase.
Kia Stinger CK = 5-door fastback
Body configuration matters when purchasing long exterior trim. The Stinger CK is a five-door fastback. Do not select a similar-looking sill moulding simply because its overall length or profile appears close.
Kia Stinger CK 2017-2023
| Years | Make | Model | Chassis | Body | Side | Primary Number | Status |
|---|---|---|---|---|---|---|---|
| 2017-2023 | Kia | Stinger | CK | 5-Door Fastback | Right | 87752-J5300 | CATALOGUE FAMILY |
Will Not Fit / Do Not Order If...
- You require the LEFT-hand sill moulding.
- Your existing component carries a different manufacturer number and cannot be cross-verified.
- Your fixing tabs, clips or mounting channels differ from the photographs.
- Your vehicle is not a Kia Stinger CK.
- You are identifying the part solely by colour.
- Your car has an aftermarket side-skirt or modified body-kit system.
- You require the welded structural metal sill.
- You need the left-side 87751-series assembly.
- You expect the existing paint to be a guaranteed invisible colour match without refinishing.
- You have not compared the reverse mounting points.
Correct geometry matters
A factory-produced exterior moulding begins with the panel contours, clip positions, mounting geometry and body interface developed for the vehicle. Low-cost pattern alternatives can vary in material thickness, moulding accuracy, mounting alignment and surface finish.
Choosing a carefully inspected recycled factory component can provide the correct original design geometry while avoiding the cost of purchasing an equivalent replacement brand new.
Automotive components physically stocked on our shelves across a wide range of makes and models.
Designed around the vehicle's original body contours, fixing points and panel relationships.
Potential saving on selected premium recycled components compared with comparable brand-new replacement pricing. Actual saving varies by component and market price.
Workshop fitting available
Recommended tools
Step-by-step fitting overview
Compare 87752-J5300, right-side orientation, overall profile, end shapes and the complete rear mounting arrangement.
Apply low-tack protection around the sill, lower door edges and adjacent painted areas before using trim-removal tools.
If lifting is required, follow the vehicle manufacturer's approved lifting procedure and use correctly rated workshop equipment. Never work beneath a vehicle supported only by a jack.
Identify and remove the relevant lower, front, rear and sill-edge fasteners. Do not assume the exact quantity or head size before inspecting the vehicle.
Use plastic trim tools and clip pliers to disengage one mounting section at a time. Avoid sharply twisting the long moulding.
Check every clip, locating tab, screw point and end profile. Replace broken or weakened retainers before fitting.
Remove road dirt and check mounting apertures, retainers and surrounding paintwork before installing the replacement.
Align the front and rear profiles first. Ensure the moulding sits naturally against the body before engaging clips and reinstalling retaining hardware.
Confirm the panel sits flush, all mounting points are secure and there is suitable clearance around doors and adjacent panels.
Estimated garage labour matrix
Static labour-only examples based on a 1.0-hour estimated fitting time.
| Estimated Time | £40 / Hour | £60 / Hour | £80 / Hour | £100 / Hour |
|---|---|---|---|---|
| 1.0 Hour | £40 | £60 | £80 | £100 |
Figures are illustrations rather than quotations and exclude replacement clips, consumables, body repair, refinishing, additional dismantling and any unforeseen work.
UK & international delivery
📦 Buyer-Paid Delivery
This listing does not advertise free postage. Buyers pay the applicable shipping charge calculated or displayed by eBay at checkout.
Long painted trim components are carefully protected to reduce movement and surface contact during transport.
🌍 International Shipping
Where the listing and destination are eligible, international shipping may be provided through eBay's available international delivery programme, including the Global Shipping Programme where shown by eBay.
Eligible destinations can include the UK, Europe, USA, Canada, Australia and other regions offered at checkout. Availability and cost depend on destination and eBay eligibility.
Protected from shelf to destination
Please verify before ordering
VAT Global Accounting / Margin Scheme
Where this component is accounted for under the applicable VAT Global Accounting / second-hand margin scheme, VAT is not separately itemised and no reclaimable VAT invoice is available.
Incorrect Variant & Change-of-Mind Returns
Please compare the manufacturer number, orientation, photographs and fixing layout before fitting.
Change-of-mind and incorrectly ordered returns are handled in accordance with the return policy displayed by eBay and applicable consumer law.
Returned components should be complete and in the same condition in which they were supplied. If an item is returned fitted, altered, damaged, incompletely returned or inadequately packaged and this causes an actual reduction in value, a deduction may be applied only where eBay policy and applicable law permit, up to the applicable eBay limit.
There is no automatic percentage deduction simply because the wrong variant was ordered.
How to Find Us / Customer Support
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
♻️ Keep Quality Components in Circulation
Choosing a high-grade recycled automotive component gives serviceable material another working life, reduces unnecessary automotive waste and can reduce demand for manufacturing a replacement component from new raw materials. 🌍
It also supports specialist vehicle recycling, skilled local employment and independent UK businesses. Thank you for choosing a practical, economical and more resource-conscious way to keep vehicles on the road. 🔧♻️🇬🇧