Land Rover Discovery 3 L319 05-07 Centre Console Cup Holder FWW500060XXX
Land Rover Discovery 3 L319 05-07 Centre Console Cup Holder FWW500060XXX
⚠️ FITMENT FIRST — PLEASE READ BEFORE ORDERING
Please compare the shape, locating tabs and moulded number in the actual photographs. If you are unsure, message us through eBay with the full 17-character VIN before buying. We will verify fitment from the VIN and part-number information rather than guessing from registration details.
Match the physical shape, opening, locating foot and retaining tabs.
The reverse moulding on this item reads FWW500060XXX BOX.
Discovery 3 direct catalogue range: 5A333229 to 7A999999.
✅ VERIFIED COMPATIBILITY
| Vehicle | Model years | Chassis | VIN range | Part reference | Status |
|---|---|---|---|---|---|
| Land Rover Discovery 3 | 2005–2007 | L319 | 5A333229 to 7A999999 | FWW500060PVJ / moulded core FWW500060XXX | CONFIRMED DIRECT CATALOGUE APPLICATION |
| Land Rover Range Rover Sport | 2005–2007 | L320 | To 7A999999 | FWW500060PVJ | CONFIRMED DIRECT CATALOGUE APPLICATION — VIN CHECK ADVISED |
Model year and registration year can differ. The JLR catalogue VIN break is the controlling fitment reference. If your vehicle is near a break point, send the full VIN before purchase.
⛔ DO NOT ASSUME FITMENT OUTSIDE THE VERIFIED RANGE
| Vehicle / range | JLR catalogue shows | Buying guidance |
|---|---|---|
| Discovery 3 L319 — up to VIN 5A333228 | FWW500042PVJ | Do not order FWW500060 as a confirmed direct fit without VIN/interchange verification. |
| Discovery 3 L319 — VIN 8A000001 to 8A999999 | FWW500120 | Different direct catalogue number. Do not assume reverse interchange. |
| Discovery 3 L319 — from VIN 9A000001 | FWW500160 | Different direct catalogue number. Do not assume reverse interchange. |
| Range Rover Sport L320 — VIN 8A000001 to 8A999999 | FWW500120 | Different direct catalogue number. VIN verification required. |
| Range Rover Sport L320 — from VIN 9A000001 | FWW500160 | Different direct catalogue number. VIN verification required. |
| Discovery 4, Range Rover L322, Freelander 2, Evoque, Defender and any other model | No direct primary-catalogue verification used for this listing | Not advertised as compatible. Send VIN + existing part number for a separate check. |
A later service part superseding an earlier number does not automatically prove that an earlier used component is a correct reverse-fit for a later VIN. That is why this listing is kept to the verified FWW500060 application rather than advertising every vehicle associated with later superseded numbers.
📷 ACTUAL ITEM PHOTOS
Condition is used. Normal age-related cosmetic marks, light scratches and dismantling/storage marks may be present. Please use the photographs as the primary condition reference.
📍 WHERE THIS PART FITS
Reference vehicle/interior images are public-domain Wikimedia Commons images and are included only to show the correct vehicle generation and installation location.
🔧 WHAT THE CUP-HOLDER INSERT DOES
This is the front centre-console cup-holder insert. It is a mechanical trim/storage component. It supports and locates a cup or bottle in the console, helps reduce movement and rattling, and protects the surrounding console from direct contact and spills.
It does not control an electrical or electronic system. There is no programming, coding or diagnostic reset associated with fitting this insert.
Common reasons for replacement
- Cracked or split rim.
- Broken or weakened retaining tabs.
- Insert lifts out or rocks in the console.
- Cup or bottle sits loosely and rattles.
- Original insert is missing.
- Cosmetic wear makes the centre console look untidy.
- Damage allows drinks to move excessively or increases the chance of spillage.
🧩 PART DETAILS & MATERIAL
Front centre-console cup-holder insert.
Black / ebony-style interior trim.
Moulded plastic; reverse moulding is marked PP/PE.
None.
Not required.
One used insert as pictured unless the eBay quantity selector states otherwise.
🛠️ FITTING GUIDE
Tools normally required
- Normally no hand tools are required.
- Optional plastic trim tool for a stubborn old insert.
- Small torch for checking broken tabs or debris.
- Vacuum / soft cloth for cleaning the cup-holder aperture.
Typical installation procedure
💷 STATIC GARAGE LABOUR COST CALCULATOR
eBay does not allow active JavaScript in listing descriptions, so this is a simple static labour guide. Formula: garage hourly rate × billed time.
For this insert, a typical straightforward fitting window is roughly 0.10–0.25 hour (about 6–15 minutes). Garages may apply a minimum labour charge, so an actual invoice can be higher.
| Garage labour rate | 0.10 hour | 0.25 hour | Indicative labour range |
|---|---|---|---|
| £40/hour | £4 | £10 | £4–£10 |
| £60/hour | £6 | £15 | £6–£15 |
| £80/hour | £8 | £20 | £8–£20 |
| £100/hour | £10 | £25 | £10–£25 |
| £120/hour | £12 | £30 | £12–£30 |
⭐ WHY CHOOSE AN ORIGINAL MANUFACTURER USED PART?
- Factory-matched geometry: the shape, locating tabs and trim profile were designed for the original console.
- Factory-style finish: helps retain the correct appearance and texture inside the vehicle.
- Known part-number trail: fitment can be checked against the vehicle VIN and manufacturer catalogue rather than relying on a generic shape claim.
- Used value: a serviceable used original-manufacturer part can provide a substantial saving against purchasing a new replacement. The exact saving varies by part and current new retail price.
- Reuse: keeping a serviceable component in circulation extends its useful life and reduces unnecessary waste.
📦 THEPARTPILOT STOCK, COLLECTION & FITTING
Large on-the-shelf inventory across many makes and models.
Collections can be arranged up to 8pm, including bank holidays, by prior appointment.
Workshop fitting or repair support may be available subject to capacity and prior arrangement.
Parts are picked from UK stock and packed for transport.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
🌍 DELIVERY & CHECKOUT ADDRESS
UK delivery: use the postage option shown on the eBay listing.
International delivery: may be available to eligible destinations through eBay-managed or seller-selected international postage options. The destinations, import charges and delivery price shown by eBay at checkout are the controlling information. Availability can vary by item category, destination and seller settings.
🧾 VAT / GLOBAL ACCOUNTING
This used item is sold under the VAT Margin Scheme / Global Accounting where applicable. VAT is accounted for under the scheme and is not shown separately on the sales invoice. There is therefore no separately stated VAT amount for the buyer to reclaim.
↩️ RETURNS — HELP US GET THE RIGHT PART FIRST TIME
This listing currently offers 30-day returns. Before ordering, please check the VIN range, moulded number and physical shape. If unsure, ask us to verify the full VIN before purchase.
Returns are handled through eBay in line with the listing return policy and applicable consumer rights. No blanket restocking fee is applied. If a returned item comes back materially changed, damaged or incomplete, any deduction will only be handled where eBay policy and applicable law permit it.
♻️ SUPPORT A LOCAL SMALL BUSINESS & KEEP GOOD PARTS IN USE
Thank you for supporting ThePartPilot, a UK small business. Choosing a serviceable used component helps keep useful parts in circulation, reduces avoidable waste and can reduce the demand for newly manufactured replacement components. Every correct-fit reuse is one more part doing the job it was designed to do. 🌍♻️🔧