LAND ROVER RANGE ROVER L322 2003-2012 FRONT INTERIOR LIGHT CONSOLE 239358

£19.82

Premium Recycled Automotive Components

THEPARTPILOT

LAND ROVER RANGE ROVER L322 FRONT OVERHEAD INTERIOR LIGHT CONSOLE

Name: LAND ROVER RANGE ROVER L322 2003-2012 FRONT INTERIOR LIGHT CONSOLE 239358
Brand: Land Rover
SKU: 206291855179
Price: 19.82 GBP
Availability: InStock

Fits: 2003 - 2012 (03-12)
Photo-verified component identifier: 239358

Precision-matched, factory-origin replacement component for buyers who value proper mounting geometry, correct interior appearance and the right electrical interfaces over weak, poorly fitting low-cost copies.

THEPARTPILOT

25,000+ Parts In Stock

30 Days Seller Warranty

Up To 70% Potential Saving Vs New

Photo First Fitment Verification

THE ACTUAL ITEM YOU ARE BUYING

Range Rover L322 front overhead interior light console 239358 actual item

Actual photographed component. Please inspect the colour, switch layout, apertures, mounting points and overall configuration before ordering.

PHOTO-VERIFIED IDENTITY The component itself visibly carries 239358. This is not a number taken only from the listing title. The photographed moulding also carries a PC/ABS material marking.

Vehicle Range Rover L322

Saleable Fitment 2003-2012 / 03-12

Location Front / Centre / Upper Headliner

Component ID 239358

Visible Material Mark PC/ABS

Visible Colour Ivory / Parchment / Light Beige

Mounting Screws & Retaining Points

Universal Part No

HIGH-RESOLUTION COMPONENT INSPECTION

Range Rover overhead console 239358 part number and PC ABS material marking

Close-up of the photographed moulding showing the 239358 identifier and material marking.

Rear electrical side of Range Rover L322 overhead console 239358

Rear construction showing electrical/contact elements, switch/lamp areas and retaining architecture.

Range Rover L322 front interior roof console detail

Additional actual-item view for trim, switch, lens and cosmetic matching.

CRITICAL FITMENT CHECK Do not order from the vehicle registration, model name or automated compatibility result alone. Compare your existing console with every photograph, including 239358, colour and texture, switch arrangement, lamp apertures, connector positions and retaining points. Similar-looking L322 consoles can have different trim and electrical configurations.

THEPARTPILOT

WHY CHOOSE A FACTORY-ORIGIN RECYCLED COMPONENT?

A properly matched factory-origin component was engineered around the vehicle's original roof trim, mounting positions, electrical connections and interior tolerances.

Mechanical & Fit Advantages

Correct moulded geometry for the intended headliner aperture.
Proper retaining and screw locations when the variant is correctly matched.
Better alignment of switch apertures, lamp areas and trim edges.
Original-style connector positioning and electrical contact architecture.
Reduced risk of loose fit, vibration, squeaks or visibly mismatched trim.
Better chance of matching the surrounding cabin texture and appearance.

Premium Value Without New-Part Cost

High-grade recycled components can offer a major saving compared with purchasing the equivalent component new. Depending on the individual part and market availability, savings can reach up to 70%.

THEPARTPILOT holds over 25,000 parts in stock on our shelves, helping keep proven components in service and vehicles on the road.

2003-2012 L322 VEHICLE REFERENCE

Exterior vehicle images below are supplied only to help identify the L322 generation and its visual evolution across the saleable year bracket. An exterior photograph cannot confirm an overhead-console variant. Always make the final decision from the actual component photographs, connectors and trim configuration.

2003 L322 5-door vehicle-generation reference. Wikimedia Commons public-domain image.

2007 Range Rover L322 facelift 5 door vehicle reference

Facelift-era L322 vehicle reference. Vehicle image is not a component-fitment guarantee.

2010 L322 5-door later-facelift vehicle-generation reference. Wikimedia Commons public-domain image.

COMPATIBILITY & EXACT YEAR GUIDE

PRIMARY FITMENT: RANGE ROVER L322 — 2003 TO 2012 (03-12) This is a variant-sensitive interior electrical/trim component. The year bracket establishes the saleable vehicle generation; it does not replace physical part-to-part verification.

Years	Vehicle / Chassis	Body	Required Check Before Purchase
2003-2005 03-05	Range Rover L322	5-Door SUV	Match 239358, trim colour, switch/lamp layout, connectors and retaining points.
2006-2009 06-09	Range Rover L322 facelift period	5-Door SUV	VIN/headliner and console variations exist. Compare the old assembly directly.
2010-2012 10-12	Range Rover L322 later facelift	5-Door SUV	Confirm overhead-console trim and electrical configuration from photographs before ordering.

WILL NOT FIT / EXCLUSION LIST

DO NOT ASSUME FITMENT TO THE FOLLOWING

Range Rover Sport L320.
Range Rover L405 generation from 2013 onward.
Range Rover Evoque.
Discovery, Defender or other Land Rover platforms.
Any L322 with a different overhead-console plug or pin arrangement.
Any L322 with different lamp/switch apertures or roof-control configuration.
Any vehicle requiring a different headliner colour or interior trim code.
Any unit with different screw, clip or retaining locations.
2002 is not included in this listing's saleable fitment.

WHAT THIS COMPONENT DOES

This assembly is installed in the front-centre upper headliner, above the front occupants and close to the windscreen/roof opening.

Its moulded housing locates the front interior-light and reading-light areas and supports the pictured overhead switch-panel arrangement. The rear carries the electrical/contact architecture and connections required by the pictured console configuration.

The component is therefore both visible cabin trim and an electrical interface assembly. Correct fitment depends on much more than the outer shape: connector configuration, switch package, lamp layout, clips, mounting geometry and headliner colour all matter.

MATERIAL & CONSTRUCTION The photographed face moulding is marked PC/ABS. The rear also incorporates black polymer sections and metallic electrical/contact elements. This combination provides a rigid moulded cabin housing around the electrical functions and mounting architecture.

THEPARTPILOT

OVER 25,000 PARTS IN STOCK

Warehouse reference image: Visitor7 / Wikimedia Commons, CC BY-SA 3.0.

From interior trim and electrical components to mechanical assemblies, our stocked inventory gives owners and repairers access to quality recycled components without automatically defaulting to costly brand-new replacements.

TECHNICAL FITMENT LOCATION

The diagram below is a static location guide only and is not an engineering drawing.

ROOF / FRONT HEADLINER

↓

FRONT OVERHEAD CENTRE
LIGHT / SWITCH CONSOLE

↓

FRONT OCCUPANTS / WINDSCREEN AREA

Technical rear reference of Range Rover L322 overhead console

Actual rear view. Use this photograph to compare plug positions, retaining points and electrical architecture with the component already fitted to your vehicle.

FITTING GUIDE

PLANNING TIME: APPROXIMATELY 30 MINUTES / 0.5 HOUR This is a practical estimate for a straightforward like-for-like console swap, not a manufacturer flat-rate promise. Damaged clips, wiring faults, previous repairs or diagnosis can increase the required time.

Recommended Tools

Appropriate screwdriver / bit set matching the fasteners already fitted to the vehicle.
Non-marring plastic trim-removal tool.
Small work light or torch.
Clean trim/headliner protection.
Small electrical pick only where required and used correctly.
Multimeter if electrical diagnosis is required.

Step-by-Step Replacement Overview

Switch the ignition off, remove the key and protect the surrounding headliner and trim.
Open the spectacle/storage holder in the front console.
Remove the two console securing screws using the correct tool for the existing fastener heads.
Carefully release the console from the headliner while supporting its weight.
Disconnect the electrical multiplugs from the lamp/switch assemblies without pulling on the wiring.
Place the removed and replacement units side by side.
Compare 239358, colour, surface texture, switch apertures, lamp layout, connectors, clips and mounting locations.
Transfer any required lamp/switch/retaining components only where appropriate and only if competent to do so.
Reconnect the electrical multiplugs securely.
Where safe and appropriate, function-test the assembly before final seating.
Refit the console into the headliner, reinstall the two retaining screws and close the holder.
Complete a final interior-light and switch-function check.

INSTALLATION NOTE Interior electrical work should be carried out by a competent person. Never force a connector that does not match. A differing plug or switch configuration is a fitment warning, not something to modify merely to make the part fit.

PROFESSIONAL FITTING SERVICE

Workshop reference image: Shixart1985 / Wikimedia Commons, CC BY 2.0.

THEPARTPILOT also offers a professional fitting service at our repair facility, subject to technician and workshop availability. Please contact us through eBay Messages before travelling so availability can be confirmed.

Static Labour-Cost Planning Matrix

Estimated Time	£40/hr	£60/hr	£80/hr	£100/hr
0.5 Hour / 30 Minutes	£20	£30	£40	£50

Labour-planning illustration only. It does not represent a quotation from THEPARTPILOT or any third-party garage and excludes diagnosis, additional repairs, consumables, damaged hardware and other chargeable work.

THEPARTPILOT

SECURE SHIPPING & DISPATCH

Dispatch and packing reference image — Wikimedia Commons.

UK & Worldwide Delivery

Postage is not free. Buyers pay the calculated shipping fee shown at eBay checkout for the destination and selected service.

International shipping is available through the eBay Global Shipping Programme where eligible. Supported destinations can include the UK, Europe, USA, Canada, Australia and other regions made available by eBay. Final delivery availability, import charges and destination costs are those displayed by eBay at checkout.

IMPORTANT DELIVERY ADDRESS NOTICE

Important: Customers must ensure their checkout address is correct prior to paying. Due to strict eBay Seller Protection regulations, we are entirely unable to alter or change your delivery address after purchase.

VAT MARGIN-SCHEME INFORMATION

VAT MARGIN / GLOBAL ACCOUNTING Where this eligible previously owned component is sold under our applicable second-hand-goods margin-scheme treatment, VAT is accounted for under that scheme and is not separately itemised on the sales invoice. There is therefore no separately stated VAT amount for the buyer to reclaim from that invoice.

BUY THE CORRECT VARIANT FIRST TIME

We strongly recommend verifying this component against the high-resolution photographs and the exact visible part identifier rather than relying solely on automated registration, compatibility or item-specific dropdown information.

BEFORE ORDERING, CHECK ALL OF THE FOLLOWING 239358 • face colour • surface texture • lamp apertures • switch arrangement • roof-control configuration • electrical connectors • plug positions • retaining clips • screw locations.

Returns & Condition Protection

Returns are handled in accordance with the live eBay return policy and applicable consumer law. A change of mind or ordering the wrong variant does not automatically create a fixed restocking deduction.

Where a returned component has been installed, used beyond what is reasonably necessary for inspection, damaged, altered, returned incomplete or otherwise suffers a demonstrable loss in value, any refund adjustment will reflect the actual loss in value and will only be made where permitted by applicable law and eBay policy, up to the applicable eBay maximum.

Please protect both the component and yourself from an avoidable return by carrying out the photo-and-number comparison before installation.

HOW TO FIND US / CUSTOMER SUPPORT

For fitment questions, order support or fitting-service enquiries, please message THEPARTPILOT directly through eBay Messages.

Our registered business contact information and physical-address details are displayed by eBay in the Business Seller Information / Business Details section of the listing.

WhatsApp QR for Fitment Help / Appointment Enquiries

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.

For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.

THEPARTPILOT

QUALITY PARTS. ANOTHER LIFE. LESS WASTE. ♻️

Choosing a high-grade recycled automotive component keeps a serviceable part in circulation, reduces demand for newly manufactured replacement material and helps avoid unnecessary manufacturing, packaging and disposal. It also supports a local UK small business working every day to keep useful vehicle parts out of the waste stream. 🔧🚗💚

Thank you for choosing THEPARTPILOT and helping us keep quality components — and the vehicles they belong to — in service for longer.

LAND ROVER RANGE ROVER L322 2003-2012 FRONT INTERIOR LIGHT CONSOLE 239358

LAND ROVER RANGE ROVER L322 FRONT OVERHEAD INTERIOR LIGHT CONSOLE

THE ACTUAL ITEM YOU ARE BUYING

HIGH-RESOLUTION COMPONENT INSPECTION