Mazda 6 2002-2008 ABS Pump Modulator DSC 437-0772 GR1M437A0 6705E0386
Mazda 6 2002-2008 ABS Pump Modulator DSC 437-0772 GR1M437A0 6705E0386
Mazda 6 ABS Pump Modulator
Designed for a clear, search-friendly eBay listing with strong fitment wording, part-number verification, premium layout, and buyer confidence sections.
What this part does
This ABS pump modulator sits in the brake hydraulic system and helps regulate brake pressure during ABS intervention. It is a critical safety component in the Mazda 6 braking and stability system.
Common symptoms of failure
- ABS warning light or DSC / traction warning light illuminated
- Loss of ABS operation under heavy braking
- Intermittent pedal feedback or pump fault codes
- Brake warning messages stored in the module
- Reduced stability control performance
Why replacement matters
- Restores correct brake pressure modulation
- Helps return ABS / DSC functionality to factory-spec operation
- Prevents repeat labour from a poor match or incorrect module
- Reduces the risk of returns caused by fitment confusion
Reference photos
Two public reference images are included below so the customer can recognise the correct vehicle layout and the component position in the engine bay.
Verified fitment summary
The listing title and cross-reference data point to Mazda 6 2002-2008. The visible compatibility grid on the live listing shows 2007-2008 Mazda 6 petrol saloon, hatch, and estate variants with 2.0 / 2.3 / 2.3 AWD / 2.3 350GT Hybrid applications.
| Year range | Body style | Variant / engine | Fitment note |
|---|---|---|---|
| 2002-2008 | Mazda 6 GG / GY | Platform range shown by listing title and cross-reference data | Match part number and compare the module visually before purchase. |
| 2007-2008 | Saloon | 2.0 FWD / AWD, 2.3 FWD | Visible in the compatibility grid on the live listing. |
| 2007-2008 | Hatch | 2.3 FWD | Visible in the compatibility grid on the live listing. |
| 2007-2008 | Estate | 2.0 FWD, 2.3 FWD / AWD, 2.3 350GT Hybrid | Visible in the compatibility grid on the live listing. |
Important: fitment should always be confirmed by the OE references 437-0772 / GR1M437A0 / 6705E0386 / 2067142 and by photo comparison of the connector, mounting points, and pump body. Do not buy by model name alone.
Fitting instructions
Basic workshop process
- Disconnect the battery and secure the vehicle.
- Depressurise the brake system following workshop procedure.
- Remove access panels or intake components if required.
- Unplug electrical connectors and label brake lines before removal.
- Swap the module, torque fasteners correctly, and bleed the brake system.
- Clear fault codes and road test the vehicle.
Recommended tools
- Socket set and ratchet
- Brake line spanners
- Trim tools
- Brake bleeding kit / pressure bleeder
- Torque wrench
- Diagnostic scanner for ABS / DSC faults
Labour cost guide
Estimated garage charge based on a typical 2.5 hour workshop job:
| Hourly rate | Estimated charge | Formula |
|---|---|---|
| £50 / hour | £125.00 | 2.5 x £50 |
| £60 / hour | £150.00 | 2.5 x £60 |
| £75 / hour | £187.50 | 2.5 x £75 |
| £90 / hour | £225.00 | 2.5 x £90 |
For eBay-safe HTML, this is presented as a fixed rate guide rather than a live calculator.
Seller information
Part Pilot service notes
- Over 25,000 parts on the shelf at any one time
- Fitting service available subject to availability
- Collections 7 days a week until 8pm by appointment
- Bank holidays by prior appointment
- Customers must ensure checkout address details are correct
Buyer confidence
- Detailed fitment information to help prevent wrong orders
- Part numbers listed clearly for comparison
- Reduced returns by confirming body style and chassis code
- Used parts can offer major savings versus new replacement units
Dispatch & warehouse images
Collections & contact
How to find us
Scan the QR code to open WhatsApp and message for collection arrangements and fitment help.
This template also suits the premium ThePartPilot brand style with a clean luxury layout and large readable text.