MG MG3 2015 5 Door Interior Rear View Mirror Sensor Housing Cover 10039738
The actual photographs and the moulded part number identify this item as a black interior rear-view mirror mounting / sensor housing cover section. It is not an exterior door mirror, wing mirror, mirror glass or complete interior mirror assembly. Please buy from the photographs, stamped number and clip layout rather than any automated item-specific category.
Actual Item Photographs — The Part You Will Receive
Used part. Expect normal storage, handling and cosmetic marks. Compare every photograph with the part already fitted to your vehicle before ordering.
THEPARTPILOT
Actual item — outer face and overall profile.
THEPARTPILOT
Actual item — rear face, retaining tabs and clip geometry.
THEPARTPILOT
Actual item — moulded number 10039738 and material marking.
THEPARTPILOT
Actual stock identification image — MG3, 2015 donor reference.
Verified Part Details
| Detail | Verified information |
|---|---|
| Vehicle make / model | MG MG3 5-door hatchback |
| Confirmed donor year | 2015 |
| Part identification | Interior rear-view mirror mounting / sensor housing cover section |
| Moulded part number | 10039738 |
| Catalogue-format reference | 10039738-ASA |
| Related companion half | 10039739 may be the opposite / mating cover on some mirror installations. It is not included. |
| Position in vehicle | Interior, top centre of windscreen, around / behind the interior rear-view mirror mounting base |
| Colour / finish | Black textured moulded plastic |
| Material marking | PA6-GF15 — nylon 6 reinforced with 15% glass fibre |
| Attachment | Clip / retaining-tab fit. Compare the photographed tabs with your existing part. |
| Included | One housing cover section exactly as photographed |
| Not included | Mirror glass, complete mirror assembly, wiring, rain/light sensor, camera, bracket, adhesive pad, screws or companion cover half |
Vehicle & Fitting-Location Reference
The confirmed donor is a 2015 MG3 five-door hatchback. The interior image highlights the top-centre windscreen area where this trim section is normally fitted.
Correct body style reference
Top-centre windscreen location
Compatibility — Read Before Ordering
| Make / model | Years | Body | Status | Conditions |
|---|---|---|---|---|
| MG MG3 | 2015 | 5-door hatchback | CONFIRMED DONOR | Actual item label, photographs and moulded number 10039738 correspond with this donor application. Still compare your existing part before purchase. |
| MG MG3, second-generation family | 2011–2021 | 5-door hatchback | CONDITIONAL ONLY | Independent cross-reference material associates 10039738 / 10039739 with some models in this range. Order only when your removed part is marked 10039738 or 10039738-ASA, the photographed clip layout is identical, and VIN verification supports the application. |
| Any other vehicle | Any | Any | NOT CONFIRMED | No additional vehicle application is claimed without an authoritative catalogue cross-reference and VIN check. |
This item will not fit / will not replace:
- Any exterior door / wing mirror, mirror glass, indicator, motor, cap or complete mirror assembly.
- A complete interior mirror, mirror glass, dimming mechanism, wiring loom, camera or rain/light sensor.
- Vehicles whose existing cover is marked with a different part number or has a different clip / aperture layout.
- The opposite companion cover half identified as 10039739 where that separate half is required.
- MG3 third-generation / Hybrid+ vehicles introduced from 2024 onward.
- MG3 first-generation estate / SW variants or any model not visually and numerically matched.
- MG6 or other MG models unless a VIN-specific catalogue check explicitly confirms 10039738 for that exact vehicle.
Before ordering, send the full 17-character VIN plus a clear photograph of your original cover, its stamped number and rear clips through eBay Messages. Registration-only matching, automated compatibility and appearance alone are not sufficient for a safety-conscious fitment decision.
What This Part Does
Finishes the mirror base
Conceals the installation
Provides physical protection
Typical signs that replacement may be needed
- Cover is missing, cracked, split or visibly damaged.
- Retaining tabs are broken and the cover hangs loose or rattles.
- The two housing halves separate or leave an unsightly gap around the mirror base.
- Mirror mounting hardware, wiring or sensor area is exposed.
- Interior trim has been damaged during mirror or windscreen work.
Why Choose an Original Production Part?
Correct moulded geometry
Known material specification
Lower-waste repair
Potential value saving
Fitting Guide, Tools & Estimated Time
Recommended tools
- Plastic / nylon trim-removal tool — do not lever against the windscreen with a metal screwdriver.
- Clean gloves, microfibre cloth and a small torch.
- Low-tack masking tape to protect adjacent trim if required.
General fitting sequence
- Park safely, switch the ignition off, remove the key and allow any powered accessories to shut down.
- Before removing anything, compare the replacement number, outer contour, openings and every rear clip with the installed part.
- Protect the mirror, headlining and windscreen. Support the mirror assembly; never use it as a lever.
- Use a plastic trim tool or fingertips to release the damaged cover in the same direction as its retaining tabs. Work gradually and do not force brittle clips.
- Inspect the mirror bracket, mating cover half, sensor/camera housing and wiring. Stop if anything is loose, damaged or under tension.
- Align the replacement tabs precisely, then press evenly by hand until the cover sits flush. Excessive force means the part or orientation may be wrong.
- Confirm the mirror adjusts normally, the cover is secure and there are no warning lights, rattles or trapped wires.
Garage Labour Cost Estimator
Static eBay-safe calculation: hourly labour rate × booked labour time. The hands-on trim task may take 5–15 minutes, but many garages apply a minimum booking charge of 0.5 or 1.0 hour.
| Garage hourly rate | 0.25 hour | 0.50 hour | 1.00 hour minimum |
|---|---|---|---|
| £50 / hour | £12.50 | £25.00 | £50.00 |
| £70 / hour | £17.50 | £35.00 | £70.00 |
| £90 / hour | £22.50 | £45.00 | £90.00 |
| £120 / hour | £30.00 | £60.00 | £120.00 |
| £150 / hour | £37.50 | £75.00 | £150.00 |
Illustrative labour only; diagnosis, broken clips, damaged mating parts, sensor work, VAT and local pricing can change the final charge. A fitting service may be available subject to technician capacity and prior appointment. Arrange through eBay Messages.
Workshop, Stock & Dispatch
Fitting support
Large stockholding
Prepared for dispatch
Workshop, warehouse and packaging photographs above are illustrative stock photography and do not depict this exact item or necessarily show our premises.
Delivery, Collection & Checkout Address
The order can only be dispatched to the address supplied through eBay checkout. We cannot manually change the delivery address after purchase. Cancel and repurchase with the correct checkout address where eBay permits.
- International delivery is offered through the eBay programme where the item, destination and buyer are eligible.
- Destination availability, import charges, exclusions and final shipping price are controlled by eBay and shown at checkout.
- eBay is transitioning UK sellers from the Global Shipping Programme to eBay International Shipping; checkout is therefore the authoritative destination check.
- Collection is available 7 days a week until 8pm by prior appointment, including bank holidays by prior agreement.
- Collection instructions and the collection-point address are supplied through eBay Messages after the order is placed and an appointment is confirmed.
Current eBay programme destination reference
Subject to eBay checkout, programme transition, item restrictions and temporary country suspensions.
- Antigua and Barbuda
- Aruba
- Australia
- Austria
- Bahamas
- Bahrain
- Bangladesh
- Barbados
- Belgium
- Belize
- Bermuda
- Bolivia
- Brazil
- Brunei Darussalam
- Bulgaria
- Cambodia
- Canada
- Cayman Islands
- Chile
- China
- Colombia
- Costa Rica
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Dominica
- Dominican Republic
- Ecuador
- Egypt
- El Salvador
- Estonia
- Finland
- France
- French Guiana
- Germany
- Gibraltar
- Greece
- Grenada
- Guadeloupe
- Guatemala
- Guernsey
- Honduras
- Hong Kong
- Hungary
- Iceland
- Indonesia
- Ireland
- Israel
- Italy
- Jamaica
- Japan
- Jersey
- Jordan
- Kuwait
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Macau
- Malaysia
- Maldives
- Malta
- Martinique
- Mexico
- Monaco
- Montserrat
- Netherlands
- New Zealand
- Nicaragua
- Norway
- Oman
- Pakistan
- Panama
- Paraguay
- Peru
- Philippines
- Poland
- Portugal
- Qatar
- Reunion
- Romania
- Russia
- Saint Kitts and Nevis
- Saint Lucia
- Saudi Arabia
- Singapore
- Slovakia
- Slovenia
- South Africa
- South Korea
- Spain
- Sri Lanka
- Sweden
- Switzerland
- Taiwan
- Thailand
- Trinidad and Tobago
- Turks and Caicos Islands
- Ukraine
- United Arab Emirates
- United States
- Uruguay
- Vietnam
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Returns, Condition & VAT Information
- This is a used part. Study the actual item photographs for marks, finish, clip condition and what is included.
- Fitment must be confirmed from the VIN, part number, identical shape and identical rear clip layout before installation.
- Returns are handled under the return terms shown on the listing, eBay rules and applicable consumer law. Statutory rights are not affected.
- Do not modify, paint, glue, cut or force-fit the part until compatibility has been confirmed.
- Sold under the VAT margin / global accounting scheme where applicable. VAT is not shown separately and is not reclaimable as input tax.
Support a Local Parts Business & Reuse More ♻️ 🚗 💚
Buying a correctly matched used vehicle part supports a local small business, keeps a serviceable component in use and can reduce the demand for new material, manufacturing, packaging and disposal. Careful fitment checking also prevents unnecessary shipping and returns — better for the customer, the vehicle and the environment.