MINI R56 Hatch 2006-2013 R55 Clubman 2007-2014 Fuel Flap Door 51177148883
MINI R56 Hatch 2006-2013 R55 Clubman 2007-2014 Fuel Flap Door 51177148883
MINI R56 Hatch / R55 Clubman Fuel Filler Flap
Used MINI-marked exterior fuel door cover • Part number 51 17 7 148 883 / 51177148883 / 7148883
Sale item: one used, painted fuel filler flap/door cover exactly as shown. The locking actuator, filler cap, hinge carrier, fuel neck, screws and any separate decorative trim are not included unless physically visible in the photographs.
Actual Part Photographs
These are photographs from this listing. Inspect every image for paint marks, scratches, edge wear, clip condition and overall used condition before ordering.
Reference Vehicles and Fitting Location
The flap fits in the exterior rear quarter panel at the fuel filler opening. The R56 reference photograph visibly shows the circular flap position above the rear wheel area. Vehicle photographs are model/body-style references only; the sale item is the photographed loose part.
_1.jpg){kind=link}
Verified Part Identification
Parts Compatibility Chart
Primary verification is the stamped part number, not registration lookup or a generic model description. Production transitions can overlap. A VIN check and comparison with the existing flap remain the safest method.
| Vehicle | Chassis / body | Catalogue production coverage | Listing-year guide | Fitment status |
|---|---|---|---|---|
| MINI Hatch | R56, 3-door hatch | Approx. 11/2005 to 08/2010 | 2006-2010 | Fits where existing flap is 51177148883 / 7148883 |
| MINI Hatch facelift | R56 LCI / R56N, 3-door hatch | Approx. 03/2009 to 11/2013 | 2010-2013 | Fits where existing flap is 51177148883 / 7148883 |
| MINI Clubman | R55, Clubman estate | Approx. 10/2006 to 07/2010 | 2007-2010 | Fits where existing flap is 51177148883 / 7148883 |
| MINI Clubman facelift | R55 LCI / R55N, Clubman estate | Approx. 03/2009 to 06/2014 | 2010-2014 | Fits where existing flap is 51177148883 / 7148883 |
Potential trim and engine variants within those chassis
One, Cooper, Cooper D, Cooper S, Cooper SD and John Cooper Works variants may share the underlying flap within R55/R56 applications. Engine badge alone is not a fitment check. Decorative outer trim, colour and carrier condition must be compared, and VIN verification is recommended before ordering.
Will Not Fit / Do Not Order For
| Excluded vehicle or part | Reason |
|---|---|
| BMW 1 Series E81 / E82 / E87 / E88 | Not the application identified by photographed number 51177148883 |
| BMW 3 Series E90 / E91 / E92 / E93 | Not the application identified by photographed number 51177148883 |
| MINI Convertible R57, Coupe R58 or Roadster R59 | These body styles use a different fuel-flap application; do not buy from shape alone |
| MINI Countryman R60 or Paceman R61 | Different body and fuel-flap application |
| MINI R50 / R52 / R53 | Earlier generation; different component |
| MINI F54 / F55 / F56 / F57 and later models | Later generation; different component |
| Vehicles whose existing flap has a different number or different clip layout | Do not force-fit. Request a VIN check through eBay Messages |
What This Part Does
Covers the filler recess
Completes the exterior panel opening around the fuel filler, helping shield the recess from road dirt, spray and direct exposure.
Important lock distinction
This outer flap does not itself control the central-locking function. A failure to lock or release can be caused by the separate actuator, latch or carrier, which is not included.
Common signs replacement may be needed
- Flap is missing, cracked or heavily scratched.
- Rear mounting tabs or clips are broken and the flap feels loose.
- Flap sits proud, drops out of alignment or will not stay seated on the carrier.
- Paint damage makes the panel unsuitable cosmetically.
- If the flap will not unlock, diagnose the actuator and carrier first; this cover alone may not cure the fault.
Why Choose a MINI-Marked Used Part
Factory-shaped geometry
Correct contour, moulded clip positions and panel interface are important on a visible exterior component.
Lower-waste repair
Reusing a serviceable manufacturer-marked component keeps an existing part in circulation and can reduce demand for a newly manufactured replacement.
Cost-effective
A used part can be substantially less expensive than buying new. Savings vary by item, condition, finish and current new-part pricing.
Fitting Guide
Typical tools
- Plastic trim-removal tool
- Small pick or fine flat-blade tool with the surrounding paint protected
- Masking tape or low-tack protective tape
- Work gloves and clean microfibre cloth
- Good lighting; no diagnostic equipment is normally required for the outer flap alone
Typical installation sequence
- Park safely, switch off the vehicle and open the existing fuel flap.
- Protect the painted quarter panel and photograph the existing clip orientation before removal.
- Compare the existing reverse profile, tabs and stamped number with the sale item. Do not proceed if they differ.
- Using a plastic trim tool, carefully release the outer flap from its carrier one clip at a time. Avoid twisting the carrier.
- Transfer any separate decorative trim only where it is designed to be transferred and remains serviceable.
- Align all tabs on the replacement and press evenly until each clip is fully seated. Never force a misaligned tab.
- Open and close the flap several times. Confirm even panel gap, secure retention and correct latch/actuator operation.
- If it sits proud or does not lock, inspect the separate carrier, hinge and locking actuator before assuming the flap is faulty.
Estimated fitting time: approximately 15-30 minutes for a straightforward outer-flap transfer, excluding paint preparation, refinishing, broken-carrier repair or actuator diagnosis.
Fitting service: may be available by prior appointment, subject to vehicle, workload and part condition. Ask through eBay Messages before travelling or purchasing for fitting.
Garage Labour Estimate — No JavaScript
eBay descriptions do not support an interactive script calculator. Use the formula below with your garage's quoted hourly rate.
| Garage rate | 15 minutes / 0.25 h | 30 minutes / 0.50 h |
|---|---|---|
| £50 per hour | £12.50 | £25.00 |
| £70 per hour | £17.50 | £35.00 |
| £90 per hour | £22.50 | £45.00 |
| £110 per hour | £27.50 | £55.00 |
| £130 per hour | £32.50 | £65.00 |
Illustrative labour only. Diagnosis, paintwork, materials, VAT charged by the repairer, seized/broken components and minimum workshop charges can increase the total.
Stock, Workshop and Dispatch
More than 25,000 parts are held in stock and on the shelf at any one time. The photographs below are licensed representative stock images and do not depict our exact premises, staff or your parcel.
Delivery, WhatsApp and Address Checks
International delivery
International delivery is offered through eBay's Global Shipping Programme where the item and destination are eligible. eBay displays eligible countries, charges, import information and delivery options at checkout; availability can vary by destination and item.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Returns and Correct Ordering
- Study all actual-item photographs and the full compatibility chart before purchase.
- Do not rely only on registration suggestions, item specifics, colour appearance or a visually similar flap.
- Where unsure, request a VIN and existing-part-number check through eBay Messages before ordering.
- Do not paint, modify or fit the item until identification and condition have been checked.
- Returns are handled through eBay in accordance with the listing's stated return policy and applicable law.
- A deduction may be made only where eBay and applicable law permit it for loss in value caused by installation, painting, damage, missing components or inadequate return packaging.
Support a Local Small Business
🛠️ Every correctly matched used part supports skilled local work, keeps serviceable components in circulation and helps reduce avoidable waste. By checking the VIN, part number, photographs and body style before purchase, you help us send the correct component first time, reduce unnecessary transport and minimise returns. ♻️🚗