Mitsubishi Outlander MK3 2012-2021 Front Right Complete Door White W37 Free P&P
Mitsubishi Outlander MK3 2012-2021 Front Right Complete Door White W37 Free P&P
Mitsubishi Outlander MK3 2012-2021 Front Right Complete Door White W37
Critical fitment check - read before ordering
This is a front-right / right-hand door for the Mitsubishi Outlander third-generation 5-door body family shown below. On a UK right-hand-drive vehicle, front right is the driver's side. On a left-hand-drive vehicle, the same physical right-hand door is the passenger side.
Do not order by year alone. The outer body shape may be shared across the generation, but wiring plugs, keyless-entry handle type, lock, window equipment, mirror wiring, speaker wiring, trim finish and PHEV/non-PHEV specifications can differ. Compare every photograph and the plug layout with your original door before purchase.
The photographed item does not show a readable assembly number. Catalogue numbers further down are research references only and are not claimed as the stamped number on this particular door.
01. At-a-glance item details
02. Actual item photographs
These are the listing photographs for the door being sold. ThePartPilot watermark is applied as text within the template for brand protection.
03. What is included - and what is not
| Component | Status from photographs | Buyer action |
|---|---|---|
| Painted steel front-right door shell | Shown | Inspect all six photos for dents, marks, lower-edge wear and paint condition. |
| Door window glass and channels | Shown | Check tint, markings and condition against your original glass. |
| Exterior handle | Shown | Match keyless/button style and lock arrangement before ordering. |
| Door wiring loom and multiple connectors | Shown | Compare plug shape, colour, pins and wire count. A year match alone is not enough. |
| Moisture/sound barrier | Shown, previously opened/creased | Reseal correctly during installation to help prevent water ingress. |
| Door mirror | Not shown / not included | Transfer your compatible mirror and mounting trim. |
| Interior door card / trim panel | Not shown / not included | Transfer your original trim, clips and switch surround. |
| Speaker | Not shown / not included | Transfer a compatible speaker and fasteners. |
| Window/lock switch pack | Not shown / not included | Transfer your compatible switch pack and confirm connector type. |
| Regulator, motor, latch and hidden internal hardware | Not fully visible behind the barrier | Only components physically supplied with the item are included. Treat hidden equipment as unverified until confirmed through eBay Messages. |
04. Condition and colour guidance
This is a pre-owned body panel. The photographs show dirt along the lower edge, general storage/road marks, surface scratches and a rust-coloured/chipped area near a lower corner. These points are visible so the buyer can assess the panel before purchase. Cleaning, polishing, touch-in work, rust treatment or professional paint preparation may be required depending on the finish expected.
Colour: the listing identifies the panel as White Solid with code W37. A painted panel can fade, weather or have previous refinishing, so the same code does not guarantee a perfect shade match. Check the paint code on your own vehicle and allow for blending or repainting where a showroom-level match is required.
Before installation: inspect hinge and latch areas, lower seams, glass, seals, wiring and all included components. Report any transit issue through eBay Messages before fitting or modifying the item.
05. Vehicle reference - correct 5-door body style
The two images below are licensed reference photographs of the third-generation Outlander 5-door body. They are not the donor vehicle and are included only to show the correct vehicle family and front-right door location.
The reference vehicles are left-hand-drive market examples; the physical right-hand door position is still the same. In the UK, that right-hand front door is normally the driver's door.
06. Parts compatibility table
| Vehicle / model-code family | Exact years | Body / side | Compatibility decision |
|---|---|---|---|
| Mitsubishi Outlander MK3 / III petrol and diesel body family; catalogue codes can include GF2W, GF3W, GF4W, GF6W, GF6V, GF7W and GF8W depending on engine and market | 2012-2021 generation guide | 5-door; front right / RH | Conditional fit. The photographed shell is the correct Mk3 front-right body style, but complete-assembly matching requires the same plugs, handle/lock specification, window equipment, trim and market configuration. |
| Mitsubishi Outlander PHEV MK3 / III; catalogue codes GG2W and GG3W depending on year and market | UK PHEV guide: 2014-2021 | 5-door; front right / RH | Conditional fit only. Physical door shape belongs to the same generation, but PHEV wiring, keyless equipment and trim must be matched or transferred. Do not assume plug-and-play compatibility. |
| Another Outlander MK3 with the same year but different connector, handle, lock, mirror, audio or trim specification | 2012-2021 | 5-door; front right / RH | Transfer work may be required. Use your compatible loom, regulator, lock, handle, mirror, speaker and trim where needed. |
| Any other vehicle model | Any | Any | No other vehicle is confirmed. Do not buy for ASX/Outlander Sport, Eclipse Cross, Shogun/Pajero or another make. |
Known non-fit applications
- Outlander MK2 / CW generation, including vehicles commonly registered around 2007-2012.
- All-new Outlander MK4 / later-generation body, including 2021-on vehicles from markets using the newer shell.
- ASX / Outlander Sport, Eclipse Cross, Shogun/Pajero and any unrelated Mitsubishi model.
- Rear doors, front-left doors, or any 3-door application.
- A left-hand-drive vehicle where the buyer requires its driver's door; this item is physically the right-hand door.
- Any car whose wiring plugs, handle/keyless layout or equipment do not match unless compatible parts are transferred by a competent fitter.
07. Catalogue reference numbers - research guide only
The listing itself does not provide a manufacturer assembly number, and no readable number is visible on the photographed item. The numbers below are catalogue references that demonstrate year and specification changes within the same body generation.
| Reference | Catalogue description / period | Important limitation |
|---|---|---|
| 5700B672 | Front-right door panel assembly reference; one European GF7W catalogue application shows 2012.07-2015.05. Wider catalogues also list this reference across multiple GF-series Outlander and GG2W PHEV applications. | Not verified as the number on this item; VIN and specification matching remain essential. |
| 5700B844 | Front-right door panel assembly reference; one European GF7W catalogue application shows 2015.06-2020.04, with use varying by market and build specification. | Not verified as the number on this item. |
| 80100W040P | Later front-right door panel assembly reference shown in one European GF7W catalogue application for 2020.05-2020.10. | Research reference only; do not order by this number unless your VIN catalogue confirms it. |
| 5700B550 | Front-right outer door panel reference; one European GF7W catalogue application shows 2012.07-2015.05. | Outer-skin reference only; not a complete-door identification. |
| 5700B848 | Front-right outer door panel reference; one European GF7W catalogue application shows 2015.06-2020.10. | Outer-skin reference only; not proof of complete assembly or electrical compatibility. |
| Interchange number | No photo-confirmed interchange number is available for this assembly. | Match by photographs, connector layout and vehicle details. |
| Superseded number | No photo-confirmed superseded assembly number has been established. | Do not purchase from a catalogue number alone. |
Buy the correct part first time - matching checklist
Before purchase, compare the actual-item photographs and send the following through eBay Messages when assistance is needed:
- Vehicle registration and the last 8 characters of the VIN.
- Exact model year, engine/fuel type, transmission and PHEV/non-PHEV status.
- A clear exterior photograph confirming 5-door body style and the damaged front-right door.
- Close-up photographs of your original hinge-side connector plugs, wire colours and pin layout.
- Photographs of the exterior handle, keyless-entry button/blanking style, mirror plug and switch plug.
- Your vehicle paint-code label. W37 alone does not guarantee a perfect visible shade match.
Image matching takes priority over generic item specifics. Fitment help can reduce ordering errors, but final responsibility remains with the buyer and/or installer because vehicle equipment can vary within the same registration year.
08. Where this part fits and what it controls
The door mounts to the front-right side of the body shell, between the front wing/A-pillar area and the right rear door. It closes the front occupant opening and carries or supports the window glass, run channels, outer handle, latch, seals, mirror mounting area, wiring and interior trim.
Depending on the vehicle specification, door-mounted wiring may serve the electric window, central locking, keyless-entry handle, mirror adjustment/folding/heating, speaker, courtesy light and switch pack. Those features are controlled through the vehicle-side electrical system, so a full door replacement will not repair faults caused by the vehicle harness, fuse, control module, switch or body-side damage.
The steel shell and internal reinforcement also contribute to weather sealing, occupant protection and correct latch alignment. A distorted door or hinge area should be measured before installation.
09. Symptoms and damage that can require replacement
Body and sealing symptoms
- Accident damage, a twisted shell or severe denting that prevents economical repair.
- Corrosion at the lower seam, edge, hinge mount or latch area.
- Poor shut lines, wind noise, water ingress or a door that sits proud of the body.
- Cracked window frame, damaged glass channel or distorted mirror mounting area.
Mechanical and electrical symptoms
- Door difficult to latch, unlock or open because of damaged internal mounting points.
- Window regulator, lock, handle or wiring damage following impact or water ingress.
- Broken check-strap or hinge-area metal causing excessive movement or sag.
- Intermittent window, mirror, speaker or central-locking operation caused by a damaged door loom.
Always diagnose before replacing. A misaligned A-pillar, bent hinge, body-side wiring fault, control-module fault or fuse issue may remain after the door is changed.
10. Materials and visible construction
| Area | Typical / visible material | Purpose |
|---|---|---|
| Outer and inner shell | Pressed and welded steel construction with painted exterior finish | Provides shape, mounting points and structural support. |
| Window | Automotive safety glass | Visibility, weather protection and occupant separation. |
| Seals and channels | Rubber/elastomer sections | Guide the glass and reduce water, dust and wind entry. |
| Wiring loom | Insulated copper wiring with moulded plastic connectors | Carries low-voltage signals and power for fitted door equipment. |
| Barrier and sound pads | Flexible moisture membrane and bonded acoustic material | Helps control water paths, vibration and cabin noise. |
11. Why choose a factory-fit donor component
A correctly matched factory-fit donor door retains the mounting geometry, panel profile, glass-channel layout, seal interfaces and latch/hinge locations originally designed for this vehicle family. That can reduce fabrication and adaptation compared with some low-cost pattern panels, provided the correct variant is selected and the vehicle body is straight.
| Factory-fit donor component | Low-cost pattern alternative |
|---|---|
| Original body contours and aperture relationships for the donor vehicle family. | Manufacturing tolerances and mounting detail can vary by supplier. |
| Existing glass frame, handle aperture, seal channels and internal mounting points. | May arrive as a bare shell requiring more transfer, preparation and adjustment. |
| Allows reuse/transfer of correctly matched original trim and electrical equipment. | May need additional clips, drilling, alignment work or refinishing depending on product quality. |
| Potentially lower waste and lower purchase cost than replacing every component with new-equivalent parts. | New manufacture may still be appropriate where exact new condition is essential. |
Potential saving: selected pre-owned components may cost as much as 70% less than a comparable new-equivalent part. Actual savings vary by component, condition, availability and current retail pricing; this is not a fixed saving guarantee.
12. Fitting instructions
Safety first
A complete door is heavy and awkward. Use a padded door stand or suitable lifting support and at least two competent people. Follow the vehicle workshop manual. On PHEV vehicles, do not work on or disturb orange high-voltage components; this procedure concerns the low-voltage door assembly only.
- Pre-match the replacement. Compare side, body shape, glass, handle, plug layout, lock equipment, mirror wiring and trim mounting points before dismantling the vehicle.
- Prepare the vehicle. Park level, switch the ignition off, protect the wing, A-pillar, sill and adjacent panels with blankets and masking tape. Preserve any required settings or security information.
- Isolate low-voltage power. Disconnect the 12V battery negative terminal in accordance with the workshop manual and observe the specified waiting period before unplugging door circuits.
- Remove transferable trim/equipment. Remove the original door card, switch pack, mirror, speaker and any vehicle-specific components that must be transferred. Keep fixings labelled.
- Support the old door. Use a padded stand or lifting aid. A second person must stabilise the door throughout removal.
- Disconnect the door. Unplug the hinge/A-pillar wiring connectors, release the harness grommet and disconnect the check strap. Do not pull on the wires.
- Mark alignment. Mark hinge positions where appropriate. Remove hinge fasteners while the door remains fully supported, then lift the old door away without contacting the body.
- Transfer required parts. Move compatible mirror, trim, speaker, switch pack, keyless handle/lock, loom, regulator or seals as required. Reseal the moisture barrier using suitable automotive sealing material.
- Install and align. Offer the replacement door to the body, start fasteners by hand, align shut lines and latch engagement, then tighten to the manufacturer's workshop-manual specifications. Do not invent or guess torque values.
- Test fully. Reconnect the 12V battery, initialise one-touch window or locking functions if required, and test opening, closing, latch, locks, handle, window, mirror, speaker, seals and water drainage before road use.
Recommended tools
- Padded door stand, lifting table or protected trolley jack.
- Second competent person for lifting and alignment.
- Metric socket and ratchet set; commonly used sizes may include 10, 12 and 14 mm, but verify first.
- Extensions, suitable screwdrivers/Torx bits and plastic trim-removal tools.
- Torque wrench, marker pen, masking tape, protective blankets and clip pliers.
- Automotive butyl/sealing material, cleaning products and corrosion/paint protection as needed.
- Multimeter or diagnostic tool where electrical faults must be confirmed.
Estimated workshop time
- 1.5-2.5 hours: like-for-like complete assembly with minor transfer and normal alignment.
- 2.5-4.0 hours: transferring loom, lock, handle, regulator, trim, mirror and equipment, plus detailed alignment.
- Additional time: body repair, hinge/A-pillar correction, paint preparation, refinishing, blending, diagnostics or seized fasteners.
Fitting service: available subject to workshop capacity, vehicle condition and parts required. Enquire through eBay Messages before travelling or arranging delivery.
13. Static garage labour calculator
No active content is used. Calculate estimated labour with: garage hourly rate x booked hours = estimated labour charge.
| Garage hourly rate | 1.5 hours | 2 hours | 2.5 hours | 3 hours | 4 hours |
|---|---|---|---|---|---|
| £60/hour | £90 | £120 | £150 | £180 | £240 |
| £80/hour | £120 | £160 | £200 | £240 | £320 |
| £100/hour | £150 | £200 | £250 | £300 | £400 |
| £120/hour | £180 | £240 | £300 | £360 | £480 |
Illustrative labour only. Excludes parts transfer beyond the assumed work, paint/bodywork, consumables, diagnostics, wheel alignment, recovery, storage and any tax treatment applied by the chosen repairer. Obtain a written quote from the garage.
14. UK and worldwide delivery information
Free UK postage
Free UK postage is shown on this listing. The delivery service, address eligibility and any remote-area limitation displayed by eBay at checkout are final. Large body panels must be handled carefully on arrival; inspect the package before disposal.
Checkout address must be correct before payment. For payment and seller-protection reasons, we cannot manually redirect a paid order to a different address. If an address is wrong, the order may need to be cancelled and placed again using the correct checkout details.
International delivery: where eBay's Global Shipping Programme or successor international service accepts the item, eBay calculates international postage, tracking, customs and import charges at checkout. Because a complete door is a large parcel, final acceptance depends on packed size, weight, destination and programme rules. A country appearing below is programme coverage, not a guarantee that this particular oversized item can be sent there.
EU programme destinations
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Non-EU programme destinations
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Island, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.
15. Returns, warranty and buyer care
30-day warranty: the listing states a 30-day warranty. Warranty and returns are administered through the eBay order and the terms shown on the live listing.
Return condition: return the exact item complete, unmodified, securely packed and in the same condition in which it was received. Installation marks, paintwork, damage, missing components, cut wiring or inadequate return packaging can reduce the item's value. Where eBay rules permit, any refund deduction must reflect the actual loss in value rather than an automatic fitment charge.
Fitment responsibility: the compatibility table and buyer checklist are provided to prevent wrong orders. Ask for help through eBay Messages before purchase when plugs, body style, side or equipment are uncertain. Do not fit, paint, dismantle or modify the item until the match has been checked.
16. VAT margin / global accounting information
This pre-owned component is sold under the VAT margin/global accounting scheme where applicable. VAT is not separately itemised and no reclaimable VAT invoice is available. Where a qualifying sales invoice is issued under the scheme, it is treated as a global accounting invoice.
17. Stock, fitting and careful dispatch
ThePartPilot states that more than 25,000 vehicle parts are held in stock and on the shelf at any one time. The licensed images below are illustrative only; they are not photographs of our premises, staff or this order.
Large parts inventory
Broad stock coverage helps us source replacement components across many makes and models. Send the vehicle details through eBay Messages when a related part is required.
Photo: ATD-Sportscars, CC BY-SA 4.0, Wikimedia Commons.
Fitting and repair support
Fitting service may be available subject to workshop capacity, the condition of the vehicle and any additional parts or paintwork required. Arrange availability in advance through eBay Messages.
Photo: ProjectManhattan, CC BY-SA 3.0, Wikimedia Commons.
Protected packing and dispatch
Large painted panels require edge protection, secure restraint and careful courier handling. Keep packaging until the item has been inspected and fitment is confirmed.
Photo: Bench Accounting, CC0, via Wikimedia Commons.
18. Support a local small business and reuse serviceable parts
🛠️ Supporting a specialist local business: every correctly matched order helps a small automotive-parts business invest in stock control, careful photography, customer support, packing and skilled fitting services.
♻️ Keeping useful components in service: reusing a serviceable door can extend the working life of an existing part and reduce premature disposal. It can also reduce demand for manufacturing and transporting a full new replacement assembly.
🌱 Buy once, buy correctly: please use the fitment chart, actual-item photographs and connector checklist. Accurate matching protects the vehicle, saves workshop time and helps avoid unnecessary transport and returns.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.