Mitsubishi Outlander PHEV Mk3 2014-2022 RH Power Tailgate Trim 7224A156
£22.11
Precision fitment • premium recycled vehicle parts
THEPARTPILOT
Helping drivers identify the correct part first time
eBay Item Number: 147479020739
30-Day Warranty
25,000+ Parts in Stock
Tracked UK & International Delivery
Fitment Help via eBay Messages
Mitsubishi Outlander PHEV Right Upper Tailgate Trim
RH Power Tailgate / Boot Window Pillar Side Trim — 7224A156
For third-generation Mitsubishi Outlander and Outlander PHEV 5-door models equipped with the power tailgate, subject to exact number, side, shape, colour and clip-layout match.
CRITICAL FITMENT CHECK: The moulded number on your original trim should read 7224A156. The Mitsubishi catalogue/order reference is 7224A156XA. This listing is for the RIGHT-HAND trim and the catalogue identifies it for vehicles with a power liftgate.
Actual Item Photos — Supplied Part
THEPARTPILOTActual front face and colour/finish — compare carefully with your original.THEPARTPILOTActual rear face, mounting tabs and clips — visual layout is a key fitment check.THEPARTPILOTFull reverse profile showing curvature and mounting positions.THEPARTPILOTMoulded markings visible: 7224A156, TRIM T/G SIDE RH, material >PP<.THEPARTPILOTAdditional actual-item view. Any handwritten donor/stock marks do not form part of the manufacturer number.
Condition: Pre-owned factory-manufactured trim. Expect age-related cosmetic/storage marks consistent with the photographs. You will receive the pictured item and attached clips shown; no extra fixings are promised unless visible.
Item Details & Engineering Information
Vehicle ManufacturerMitsubishi
Part TypeUpper tailgate / boot side window-pillar interior trim
Engineering Number on Part7224A156
Catalogue / Order Reference7224A156XA
Interchange Part Number7224A156 / 7224A156XA
Superseded Part NumberNo separate superseded number confirmed; XA is the verified catalogue/order suffix
PlacementTailgate interior, upper right-hand side beside rear glass
MaterialPolypropylene — verified by moulded >PP< marking
Mould Marking4B45X visible on reverse; not presented as a paint code
Colour / FinishDark blue / navy-grey as photographed; compare under your vehicle lighting
Electrical ConnectionsNone — this is a non-electrical finishing/protection trim
Country Marked in ListingJapan
Warranty30 days, subject to the listing terms
IncludedOne RH trim panel with clips/fittings exactly as pictured
Where It Fits in the Vehicle
Approximate position: inside the open tailgate, upper RH edge beside the rear window.
Reference vehicle: third-generation 5-door Outlander PHEV. Exterior image is for body-shape/location guidance only; the actual item photographs above determine condition and colour.
Second 5-door reference example showing the correct third-generation rear body style.
What this trim does
This panel finishes the inner right-hand edge of the tailgate aperture, covers exposed metalwork and fasteners, helps protect routed wiring and clip points, and provides the correct finished appearance around the rear glass. The trim itself does not operate the tailgate motor, lock, wiper or heated glass.
Verified Compatibility Guide
Make / Model
Generation / Body
Model Years
Required Specification
Fitment Status
Mitsubishi Outlander PHEV
Third generation / Mk3, 5-door SUV; GG-series chassis varies by market
2014-2022 catalogue coverage
Powered tailgate; RH upper side trim; exact 7224A156 or 7224A156XA number and matching clip layout
YES — when every check matches
Mitsubishi Outlander
Third generation / Mk3, 5-door SUV; GF-series chassis varies by market
2014-2022 catalogue family
Only outgoing-generation body with powered tailgate and exact matching number/shape
CONDITIONAL — number and equipment match required
Mitsubishi Outlander / PHEV
Manual tailgate specification
Any year
Vehicle does not have a powered liftgate
NO — catalogue specifies power liftgate
Mitsubishi Outlander / PHEV
Left-hand side trim required
Any year
Your removed panel is LH or carries a different number such as a left-side catalogue variant
NO — this item is RH
Mitsubishi Outlander / PHEV
Fourth-generation body / GN-series
2022/2023-on depending market
Newer square-body vehicle or different clip/trim profile
NO — do not buy by registration year alone
Mitsubishi ASX / Outlander Sport
Different vehicle platform and tailgate
All years
Different body and panel shape
NO
YEAR ALONE IS NOT ENOUGH. Registration dates and model-year changeovers overlap between countries. Buy only after confirming: (1) Mk3 body shape, (2) 5-door vehicle, (3) power tailgate, (4) right-hand position, (5) 7224A156 / 7224A156XA, and (6) identical shape, colour and mounting points.
Why the current eBay compatibility table should not be your only check: this trim is determined mainly by tailgate equipment, body generation, side and engineering number — not by engine size alone. A VIN/registration check through eBay Messages can add confidence, but the buyer should still compare the removed part and photographs.
Buyer Matching Checklist — Reduce Wrong Orders
1
Read the moulded number. Remove or inspect your existing panel and confirm 7224A156. Do not rely only on an online registration lookup.
2
Confirm the side. This is the vehicle's right-hand side when sitting in the car and looking forward.
3
Confirm powered tailgate equipment. The verified catalogue description for 7224A156XA is RH side gate trim with power liftgate.
4
Compare the photographs. Match every curve, tab, clip position, lower point and upper hook against your removed trim.
5
Check colour and finish. This item appears dark blue/navy-grey. Interior shades can differ between trims and production batches.
6
Ask before buying when unsure. Send the vehicle registration/VIN, a clear photo of your original part and its moulded number through eBay Messages.
Common Reasons for Replacement
Broken mounting clipsLoose or rattling panelCracked trimLarge gapsScratches or impact marksMissing panel
Symptoms you may notice
Rattling over bumps, a panel that drops away when the tailgate opens, visible fasteners/wiring, poor alignment beside the rear glass, sharp damaged edges, or a visibly incomplete boot interior.
Why a matching factory-manufactured part matters: correct curvature, grain, mounting positions and rigidity are important for a secure fit. Cheap universal or copied trim may have inaccurate clip geometry, inconsistent texture, weak tabs or a shade mismatch. A clean pre-owned original-specification panel can offer a more accurate fit while costing substantially less than a new dealer part; compare current prices before purchase.
Fitting Guide, Tools & Estimated Time
Fitting service may be available
Subject to workshop capacity, vehicle inspection and prior arrangement. Ask through eBay Messages before purchase. The workshop photograph is illustrative and does not show this exact trim repair.
Estimated fitting time: approximately 20-45 minutes for an experienced technician, assuming adjacent trim and clips release normally.
Recommended tools
Plastic trim-removal lever set
Small non-marring trim pick
Phillips screwdriver and/or 10 mm socket if neighbouring trim/handle fasteners require removal
Protective gloves and clean cloth
Replacement clips only if your originals are damaged or missing
Skill level
Moderate DIY trim work. Plastic tabs can become brittle with age or cold weather. Work in a warm environment and apply force close to each clip rather than bending the panel. Professional fitting is recommended if you are unsure.
1
Park securely, switch the vehicle off and open/support the tailgate fully. Protect the painted aperture and rear glass.
2
Remove any overlapping upper/lower tailgate trim or pull-handle fasteners only where necessary. Photograph the original arrangement before removal.
3
Starting at an accessible edge, insert a plastic trim tool close to each clip and release clips one at a time. Do not pull hard from the centre.
4
Compare both panels side by side. Transfer any reusable clip or foam pad only where the mounting design is identical.
5
Align upper and lower locating tabs first, then press directly over each clip until securely seated. Check that no wiring is trapped.
6
Refit adjacent trim and fasteners. Open and close the powered tailgate through a full cycle and listen for rubbing or rattling.
Safety: This is a general guide, not a vehicle workshop manual. Powered tailgates can move unexpectedly and trim edges can be sharp. Stop if resistance is abnormal. Electrical isolation may be required if powered components or wiring are disturbed; use manufacturer repair information or a qualified technician.
Static Garage Labour Estimate
Because eBay does not permit JavaScript/active calculators in descriptions, this compliant table shows estimated labour only. It assumes 0.5-0.75 hour. Actual charges vary by garage, seized/broken clips, diagnostic time and local rates.
Garage Labour Rate
0.5 Hour Estimate
0.75 Hour Estimate
£50 per hour
£25.00
£37.50
£75 per hour
£37.50
£56.25
£100 per hour
£50.00
£75.00
£125 per hour
£62.50
£93.75
Illustrative labour calculation only. Parts, clips, consumables, diagnostics and any applicable taxes/fees are excluded.
Stock, Inspection, Packing & Dispatch
More than 25,000 parts on the shelf
Our organised stock system helps us identify, photograph, pick and pack vehicle parts efficiently. The actual item photographs remain the definitive visual record for this listing.
Parts are checked against visible engineering numbers where available, then securely packed to reduce movement and impact during transit.
Delivery, Address, Returns & VAT Information
UK & International DeliveryDelivery services and charges are shown in the eBay listing and at checkout. International orders may be handled through eBay's Global Shipping Programme where the item and destination are eligible.
Worldwide AvailabilityeBay's programme serves eligible destinations across more than 100 markets. The live checkout result is authoritative because countries, restrictions and charges can change.
Checkout AddressPlease confirm the complete delivery address before payment. For security and seller-protection reasons, we cannot redirect an order or replace the address supplied through checkout.
Tracking & CustomsTracking and customs handling depend on the service selected by eBay. International duties, import charges and delivery estimates are displayed at checkout where applicable.
ReturnsReturns are handled under the return settings shown on the live eBay listing and eBay rules. Return the same item, securely packed and in the condition received. Any deduction is limited to actual loss in value and only where eBay policy and law allow.
VAT Global Accounting / Margin SchemeVAT is not separately itemised and no reclaimable VAT invoice is available for this second-hand margin-scheme item.
Ordering the wrong side, colour, tailgate type or generation can create avoidable cost and delay. Please complete the six-point fitment checklist before purchase. Nothing in this description removes statutory rights or eBay buyer protections.
Support a Local Parts Business & Reuse More
♻️ 🚗 📦 🔧
Buying a serviceable pre-owned vehicle part supports a local small business, keeps usable components in circulation and can reduce demand for new raw materials, manufacturing and disposal. Thank you for helping extend the useful life of automotive parts.
Fitment support and fitting-service enquiries: please use eBay Messages.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability. For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
Approximate position: inside the open tailgate, upper RH edge beside the rear window.
