Nissan Juke F15 2011-2017 Rear Right Window Regulator Motor 5 Door Electric

The listing itself currently shows "Does not apply" for the manufacturer part number, so an exact stamped number cannot honestly be asserted from the live listing data alone. Cross-reference research identifies the right-hand rear regulator-motor family as 82731-CV01B, with 82731-CV01C listed as the later replacement/superseding number; 82731-1FA0A is also catalogued as an earlier number. Match the number stamped on your existing unit and the connector/rail geometry before purchase.

Quality used Nissan Juke F15 rear right electric window regulator with motor, intended for the rear door glass lifting mechanism. The assembly combines the metal regulator mechanism, drive gear and electric motor so the rear door glass can move up and down under power from the vehicle's window switch and wiring system.

This type of assembly is mounted inside the rear door behind the door trim and controls the vertical travel of the rear door window glass. Exact mounting and connector configuration matter: the wrong side, wrong generation or wrong motor/connector can leave the window inoperative or make the unit impossible to install without modification.

The strongest OE catalogue evidence found for the rear-right regulator motor family identifies 82731-CV01B / 82731-CV01C for the Nissan Juke F15, with related applications also catalogued on certain Nissan Cube and Nissan Leaf models. Those other applications are shown separately below and are not presented as confirmed complete-mechanism fitment for this specific listing without matching the physical part number.

Estimated repair time: typically 1.0–1.5 hours for an experienced technician; allow up to 2 hours where trim fasteners, corrosion or glass alignment require additional time. Actual time varies by vehicle condition and technician.

Typical tools: plastic trim-removal tools, crosshead/Phillips screwdriver, Torx driver set, metric socket set, small ratchet, glass-support tape or suitable glass support, protective gloves and a trim-fastener tool. Exact fastener type should be checked against the vehicle before dismantling.

1. Disconnect the vehicle battery where required by the vehicle repair procedure and confirm the glass is secure.
2. Remove the rear door trim carefully, retaining all clips and fasteners.
3. Support the window glass so it cannot drop into the door.
4. Disconnect the regulator/motor electrical connector.
5. Release the regulator fixing points and remove the assembly from the rear door shell.
6. Compare the replacement unit side-by-side with the removed unit: rail shape, motor connector, fixing points and stamped number.
7. Install the replacement regulator/motor, reconnect the electrical plug and check free movement before refitting the trim.
8. Operate the window through its full travel, verify alignment/seal contact and refit the door trim.

Important: do not force the glass or regulator if the mechanism binds. A poorly aligned regulator can overload the motor and damage the glass, door frame or mechanism.

No JavaScript or active content is used in this eBay description. Use the table below as a simple hourly-rate calculator for an estimated 1.0–1.5 hour repair.

We can also offer a fitting service subject to availability. Please contact us before purchase so we can confirm vehicle compatibility, parts availability and an appointment time.

International delivery: where the listing is eligible, eBay's Global Shipping Programme / its transitioning international shipping service handles the international leg, customs processing and tracking. eBay is moving GSP sellers toward eBay International Shipping in phases from August 2026, so exact country availability can change.

Current eBay GSP destination list published for UK sellers:

Destination eligibility, prohibited items and import charges are controlled by eBay and the destination country. International buyers should review the final delivery and import information presented by eBay at checkout.

VAT: seller states that sales are made under the Global VAT Scheme and that no VAT is charged on this listing.

Checkout address: please make sure your eBay checkout address is correct before paying. We cannot amend the delivery address for you after checkout.

Returns: please check the compatibility table, photos and part-number guidance carefully before ordering. Where permitted by eBay rules and applicable law, a restocking deduction may apply to certain avoidable return categories. Any statutory consumer rights and eBay's applicable buyer-protection policies take precedence over this seller policy.

Need a fitment check? Send the full VIN and, where possible, a clear photo of the existing part label/connector. We would rather verify the part before dispatch than have you order the wrong component.

Buying from a local independent business helps keep skilled people, knowledge and employment in the local economy. Choosing a quality used car part also keeps usable components in service instead of sending them prematurely to waste. Reusing tested parts reduces the need for new raw materials, manufacturing energy and transport associated with producing replacement components.

Every correctly matched used part is another component kept in circulation — helping customers repair vehicles affordably while supporting a more circular approach to automotive parts.