Nissan Micra K14 2017-2021 ABS Pump Control Module Bosch 47660-5FP0B
Nissan Micra K14 2017-2021 ABS Pump Control Module Bosch 47660-5FP0B
Nissan Micra K14 2017-2021 ABS Pump Control Module
Part number 47660-5FP0B • Bosch-type hydraulic ABS control assembly • supplied exactly as photographed
Critical fitment check before ordering
Best verification method: send your full 17-character VIN and a clear photo of the label on your existing unit through eBay Messages before purchase. Registration lookup alone is not sufficient for this component.
Actual item photographs
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
5-DOOR K14 REFERENCE
The vehicle photograph identifies the correct K14 five-door body generation. It is not a photograph of this exact donor vehicle. The ABS assembly itself is shown in the first three actual listing photographs.
Part identification and construction
Compatibility chart — exact-number verification required
| Vehicle | Reference years | Engine / version | Fitment status |
|---|---|---|---|
| Nissan Micra V / K14 / Mk5, 5-door | 2017-2018 | 0.9 IG-T 90, HR09DET, commonly manual | Verified reference applications exist for 47660-5FP0B. Exact label, connector, ports and VIN catalogue result must match. |
| Nissan Micra V / K14 / Mk5, 5-door | 2019-2020 | 1.0 IG-T 100, HR10DET / H4D variants | Verified reference applications exist for 47660-5FP0B. Configuration-specific; confirm by VIN and original-unit number. |
| Nissan Micra V / K14 / Mk5, 5-door | 2021 | 1.0 IG-T 92, H4D-family variants | Reference application found. Buy only where the exact Nissan number or an official VIN-confirmed supersession matches. |
K14 / Mk5 5-door only Petrol turbo applications Exact number required
What this listing is not confirmed to fit
Confirmed exclusions
- Nissan Micra K13 / Mk4
- Any three-door Micra body
- Any unit with different electrical connector, hydraulic port layout or mounting arrangement
- Other Nissan or Renault models unless a manufacturer catalogue explicitly confirms the same part number for the VIN
Not automatically compatible
- K14 1.0 naturally aspirated versions
- K14 1.5 dCi diesel versions
- Cars carrying 47660-5FA0A, 47660-5FA0B or 47660-5FP0A
- Later K14 variants outside the reference applications above
These may use related hardware, but must not be treated as interchangeable unless the VIN catalogue confirms a formal supersession.
What the ABS pump controls
The assembly monitors commands from the vehicle braking and stability systems, then uses electrically controlled valves and a pump to modulate hydraulic pressure at individual wheels. Depending on vehicle equipment, it supports anti-lock braking, electronic brake-force functions, traction control and stability-control intervention.
Warning lamps
ABS, traction-control or stability-control warning lamps may remain illuminated.
Stored faults
Diagnostic trouble codes may report pump motor, internal valve, control-module or communication faults.
Reduced assistance
ABS and stability functions may become unavailable even though basic hydraulic braking can remain.
Why choose an original manufacturer part
- Correct connector design, hydraulic port layout and mounting geometry when the part number matches
- Designed around the vehicle's braking, traction and stability-control architecture
- Avoids the unknown calibration, materials and dimensional tolerances sometimes found in low-cost unverified copies
- Reusing a serviceable original part can cost substantially less than buying new; savings vary by part, condition and current new-list price
- Purchasing by exact number and VIN reduces incorrect orders, installation delays and avoidable returns
Professional fitting guidance
Typical workshop sequence
- Carry out a full diagnostic scan; record DTCs, coding/configuration and live-data findings.
- Confirm the replacement number, connector, hydraulic pipe layout and mounting points against the removed unit.
- Disconnect the 12-volt battery and follow the manufacturer's brake-system safety procedure.
- Protect painted surfaces, clean the working area and contain brake fluid safely.
- Label the brake pipes, disconnect the electrical plug and remove the unit without contaminating open hydraulic lines.
- Install the replacement assembly and tighten brackets and pipe unions to the exact Nissan specifications for the VIN.
- Refill with the specified brake fluid and complete the pressure-bleed and scan-tool ABS bleed routine.
- Code/configure the module and complete any required steering-angle, yaw-rate or related calibration.
- Clear faults, check live data, inspect for leaks, verify pedal feel and carry out a controlled safety test.
Required workshop equipment
Professional diagnostic scan tool with Nissan ABS service functions, battery support unit, pressure brake bleeder, flare-nut spanners, suitable sockets and ratchet, calibrated torque wrench, brake-fluid catch equipment, correct-specification brake fluid, line caps/plugs and personal protective equipment.
Estimated labour time and static cost guide
Estimated workshop time: approximately 2-4 labour hours, depending on access, seized unions, diagnostic work, bleeding and coding. This is a planning estimate, not a fixed quotation.
Formula: workshop hourly rate × 2-4 hours = estimated labour charge. Parts, fluid, diagnostics, coding and VAT charged by the fitting workshop may be additional.
| Garage hourly rate | 2 hours | 3 hours | 4 hours |
|---|---|---|---|
| £50/hour | £100 | £150 | £200 |
| £75/hour | £150 | £225 | £300 |
| £100/hour | £200 | £300 | £400 |
| £125/hour | £250 | £375 | £500 |
THEPARTPILOT fitting and repair services may be available by prior arrangement. Availability, diagnosis and quotation must be confirmed through eBay Messages before travelling.
Stock, collection and dispatch
25,000+ stocked parts
A broad range of used vehicle components is held on the shelf for fast order processing.
Careful dispatch
Orders are checked against the listing, protected for transit and dispatched to the checkout address supplied to eBay.
Workshop support
Fitting and vehicle-repair services are subject to workshop availability and prior confirmation.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
Collections: available seven days a week until 8pm by appointment, including bank holidays by prior appointment. Arrange and confirm collection through eBay Messages before travelling.
Delivery address: ensure the address selected at eBay checkout is complete and correct. The seller cannot manually redirect the order to a different address after purchase.
Worldwide delivery through eBay
International shipping availability is determined by eBay at checkout under the Global Shipping Programme or eBay International Shipping, depending on seller enrolment, item eligibility, destination restrictions and the buyer's delivery address.
The checkout result is authoritative because eBay can change programme coverage and exclude particular items, territories or postal codes.
Returns, fitment responsibility and VAT
Returns
Returns are governed by the return policy displayed by eBay on this listing and applicable consumer law. No blanket restocking fee is stated here. Where eBay and the law permit, a condition-based deduction may apply only for actual loss in value caused by installation, damage, contamination, dismantling, coding attempts or handling beyond what is necessary to inspect the item.
To minimise returns, verify the VIN, original-unit number, connector and hydraulic port layout before purchase. Do not install the item merely to test whether it fits.
VAT treatment
Sold under the second-hand goods Global Accounting / VAT margin scheme where applicable. VAT is not separately itemised on the invoice and is not reclaimable as input VAT by the buyer.
Vehicle purchasing
THEPARTPILOT also operates a vehicle-purchasing service with nationwide collection and same-day payment, subject to valuation, ownership checks and availability. Enquiries must be made through eBay Messages.
Support a small business and reuse quality parts
♻️ Choosing a serviceable used component helps keep usable materials in circulation, reduces demand for replacement manufacturing and supports a local independent automotive business. Every correctly matched reused part represents one less component discarded unnecessarily.
Thank you for checking the fitment information carefully. Accurate ordering protects the buyer, the vehicle, the environment and the time of everyone involved.