Nissan Qashqai J10 2007-2013 5 Door Rear Bumper Orange Free Postage
£160.22
Skip to product information
Nissan Qashqai J10 2007-2013 5 Door Rear Bumper Orange No PDC Free Postage
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Nissan Qashqai J10 2007-2013 5 Door Rear Bumper Orange Free Postage
£160.22
🔍
PHOTO-LED CHECKS
Shape and equipment verified first
📦
CAREFUL DISPATCH
Large-panel packing procedures
🔧
FITTING AVAILABLE
Subject to workshop availability
♻
REUSE & SAVE
Keep serviceable parts in use
Critical engineering-number correction
85071-JD000 identifies the small tow-eye finisher, not the full bumper fascia.
The moulded number on the main bumper shell is not legible in the listing photographs. Catalogue fascia families for this J10 shape include 85022-JD00H and 85022-BR00H; sensor-equipped variants use different references such as 85022-JD10H / 85022-BR10H. These references are matching leads, not a substitute for checking your own moulded number, VIN, body length, sensor specification and lamp layout.
Actual listing photographs
Study Every Photograph Before Ordering
The photographs form the main condition record. Ten direct eBay-hosted images are embedded below.
Colour marking: orange / copper-red metallic painted upper section with a dark blue-grey / charcoal textured lower section. The paint code is not visible, and age, fading, lighting and previous refinishing can alter appearance. Plan for preparation and paint if an exact colour match is required.
Reference vehicle photographs
Where This Part Fits on the Vehicle
Both examples show the correct five-door Nissan Qashqai J10 body family. They are body-shape guides only and are not included in the sale.
Reference vehicle photographs: Corvettec6r via Wikimedia Commons, released to the public domain. The rear-view photograph is included to show the fitting location; colour and trim may differ from the item offered.
Item identity
Detailed Item Specifications
Use the photographs and the matching table together. Do not order from colour or registration year alone.
Engineering references
Part-Number Matching Guide
Match the number moulded into your original bumper whenever possible. Catalogue references can vary by date, market and equipment.
Compatibility chart
Exact Production Ranges and Body Requirements
A registration year is not enough. The body length, bumper shape, sensor specification, lamp layout and moulded number must all agree.
| Vehicle / phase | Exact production guide | Engines / driveline represented in J10 catalogues | Fitment status |
|---|---|---|---|
| Qashqai J10 Phase 1 short body, 5 seats, 5 doors |
December 2006 to January 2010 production UK registrations are commonly 2007-2010. |
1.5 dCi K9K; 1.6 petrol HR16DE; 2.0 petrol MR20DE; 2.0 dCi M9R; 2WD or 4WD where offered. | Candidate fit only when the original bumper has the same short-body shape, no PDC holes, round side reflectors, centre lower lamp/reflector and matching shell number. |
| Qashqai J10 Phase 2 / facelift short body, 5 seats, 5 doors |
March 2010 to November 2013 production UK registrations are commonly 2010-2013. |
1.5 dCi K9K; 1.6 petrol HR16DE; 1.6 dCi R9M (2011-2013); 2.0 petrol MR20DE; 2.0 dCi M9R; 2WD or 4WD where offered. | Candidate fit only when all visible features and the moulded number agree. February 2010 transition vehicles need VIN-level checking. |
| Nissan Dualis J10 cross-market model name |
Market-dependent J10 production dates | Powertrain and trim vary by market. | Catalogue association only. Do not order without an exact moulded-number, body-shape and equipment match. |
✔ ORDER ONLY WHEN ALL OF THESE MATCH
J10 short-body five-seat shell; five doors; rear-bumper shape identical to the photos; no factory PDC apertures; round side reflectors; centre lower lamp/reflector position; tow-eye-cover position; lower-trim profile; mounting edges; and the moulded fascia number or VIN catalogue result.
✖ THIS LISTING IS NOT FOR
Qashqai+2 / JJ10 seven-seat long body; Qashqai J11 (2014-on body); Qashqai J12 (2021-on body); cars requiring factory parking-sensor holes; any different lamp, reflector, tow-eye or lower-trim layout; a front bumper; a metal reinforcement beam; or a three-door vehicle.
Three checks that prevent most wrong orders
- Body: confirm J10 short five-seat body, not the longer Qashqai+2 / JJ10.
- Equipment and shape: compare sensor holes, side reflectors, centre lamp, tow-eye cover, lower trim and every outer contour with the photographs.
- Engineering identity: compare the moulded shell number on your original bumper or send your VIN and clear rear-bumper photographs through eBay Messages before purchase.
What the part does
Location, Function and Replacement Symptoms
This is an exterior bumper skin, not the structural metal impact beam.
📍 Where it is fitted
Across the lower rear exterior of the vehicle, below the tailgate and rear lamps. It wraps around both rear corners and clips/bolts to side retainers, wheel-arch edges and lower mounting points.
⚙ What it carries
The outer bumper shape, dark lower trim, side reflectors, tow-eye access finisher and centre lower lamp/reflector arrangement as photographed. It does not operate the engine or vehicle electronics.
⚠ Common replacement signs
Cracks or splits; sharp exposed edges; impact distortion; sagging corners; broken side retainers or tabs; poor panel gaps; loose lower trim, reflectors or lamp; rattles; and heavy cosmetic damage that cannot be economically repaired.
Why a correctly matched factory-fit recycled panel matters: the original mounting geometry, contour, trim interfaces and lamp cut-outs are designed around the J10 body. A correctly identified recycled panel can reduce modification compared with an unverified low-cost pattern panel. Depending on the new dealer price, condition and repair work required, purchasing recycled can potentially save up to 70%; actual savings vary.
Workshop guide
Fitting Instructions, Tools and Estimated Time
General guidance only. Fastener type and position can vary by production date and previous repairs; consult vehicle-specific workshop information.
Required tools
Trim-clip removal tool; metric socket and ratchet set; commonly used 8 mm and 10 mm sockets subject to verification; Torx, Phillips and flat drivers; masking tape; inspection light; gloves; containers for clips; and a second person to support the panel.
Estimated repair time
Approximately 1.0-2.0 labour hours for a straightforward remove-and-refit when retainers and fixings release normally. Add time for transferring trim, repairing tabs, replacing brackets, wiring checks, surface preparation or paint. This is an estimate, not a manufacturer flat-rate time.
General fitting sequence
- Park on level ground, apply the handbrake, switch the ignition off and protect adjacent paint with masking tape.
- Open the tailgate and remove the accessible upper, lower and wheel-arch fasteners, screws and clips. Keep each fixing grouped by location.
- Support the bumper with a second person. Release each side carefully from its retaining guide instead of pulling the painted corner sharply.
- Move the bumper rearward and disconnect the centre lower lamp and any wiring actually present on the vehicle. This photographed bumper has no factory PDC apertures.
- Compare both parts side by side. Transfer compatible trim, reflectors, lamp, tow-eye finisher and brackets only after checking for cracks and damaged tabs.
- Inspect and replace broken body-side guides or clips. Offer the replacement panel up evenly, reconnect wiring, engage both sides and align the gaps before tightening.
- Refit all fasteners to the correct workshop specification. Check lamp operation, secure engagement, wheel clearance and consistent panel gaps before road use.
Static garage labour estimate
Estimate = hourly rate × labour time. Paint, materials, clips, brackets, diagnosis and additional repairs are excluded.
| Garage rate | 1.0 hour | 1.5 hours | 2.0 hours |
|---|---|---|---|
| £50/hour | £50 | £75 | £100 |
| £60/hour | £60 | £90 | £120 |
| £70/hour | £70 | £105 | £140 |
| £80/hour | £80 | £120 | £160 |
| £90/hour | £90 | £135 | £180 |
| £100/hour | £100 | £150 | £200 |
Fitting and repair service: workshop fitting may be available subject to diary capacity, vehicle condition, paint requirements and location. Ask through eBay Messages before travelling or purchasing on the assumption that a fitting slot is available.
Delivery information
Free UK Postage, Address Checks and International Delivery
Large body panels need careful packing. International eligibility is decided by eBay at checkout.
🚚 Free UK postage
Free UK postage is shown for this listing. Remote-area or service restrictions shown by eBay at checkout still apply. Dispatch timing and tracking are supplied through the eBay order.
🏠 Check the checkout address
For payment and delivery security, the parcel can only be sent to the address shown on the completed eBay order. If it is wrong, request cancellation before dispatch and place a new order with the correct address. The address cannot be manually rerouted for you.
Important GSP size warning for a bumper:
eBay's Global Shipping Programme advertises delivery to more than 100 markets, but a parcel must meet the programme limits. The current UK help page states a maximum longest side of 120 cm, a maximum weight of 30 kg and a maximum volume of 125,000 cm³. A packed rear bumper may exceed the longest-side limit. International delivery is therefore available only when eBay confirms this exact item, destination and price at checkout; the buyer pays the international delivery amount shown there.
eBay's Global Shipping Programme advertises delivery to more than 100 markets, but a parcel must meet the programme limits. The current UK help page states a maximum longest side of 120 cm, a maximum weight of 30 kg and a maximum volume of 125,000 cm³. A packed rear bumper may exceed the longest-side limit. International delivery is therefore available only when eBay confirms this exact item, destination and price at checkout; the buyer pays the international delivery amount shown there.
Current programme destination list — subject to item eligibility
The list below reflects eBay UK's published programme destinations at the time this description was prepared. It is not a guarantee that an oversized body panel can be sent to every market.
European Union: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Other destinations: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Islands, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.
Before checkout
Returns, Fitment Verification and VAT Information
Clear matching protects both the buyer and the part. Ask through eBay Messages before ordering when any detail differs.
Returns and condition
This listing shows 30-day returns. Return the same item in the same condition, with identification and security markings intact, using the eBay return process. Do not paint, cut, drill, plastic-weld or fit the part until the shape, equipment and engineering identity have been checked. Statutory rights and the eBay Money Back Guarantee remain unaffected.
Global Accounting / second-hand margin scheme
Where applicable, the sale is accounted for under the Global Accounting / second-hand margin scheme. VAT is not separately itemised and no reclaimable VAT invoice is available. The amount shown at checkout is the selling price for the item and applicable delivery.
Why buy from us
ThePartPilot — Stock, Workshop Support and Responsible Reuse
A local small business helping motorists keep vehicles on the road with correctly identified recycled components.
🏭
25,000+ PARTS
Stocked and shelved at any one time
🔧
WORKSHOP SUPPORT
Fitting and repairs subject to availability
📦
PACKED FOR DISPATCH
Boxed, protected and tracked where available
♻
RESPONSIBLE REUSE
Reducing avoidable waste and demand for new materials
Thank you for supporting a local small business. Reusing a serviceable vehicle component can extend the useful life of an existing part, reduce waste and lower the demand for the energy and raw materials needed to manufacture a new replacement. Careful photo-led identification and the compatibility chart above are designed to help you buy the correct part first time. 🚗 🔧 📦 ♻
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
THEPARTPILOT
Message us through eBay before purchase for VIN and photograph-based fitment assistance. No off-platform contact details are included in this listing.
BRAND-PROTECTED LISTING • ITEM 147412623420 • THEPARTPILOT