Nissan Qashqai J11 2014-2017 Panoramic Roof Light Alarm Sensor 28436-4EA0B

Nissan Qashqai J11 2014-2017 Panoramic Roof Light Alarm Sensor 28436-4EA0B

£22.76
Skip to product information
Nissan Qashqai J11 2014-2017 Panoramic Roof Light Alarm Sensor 28436-4EA0B

Nissan Qashqai J11 2014-2017 Panoramic Roof Light Alarm Sensor 28436-4EA0B

£22.76
THEPARTPILOT
USED FACTORY CAR PARTS | UK STOCK | 25,000+ PARTS AVAILABLE

Nissan Qashqai J11 2014-2017 Panoramic Roof Light & Interior Alarm Sensor

PART NUMBER: 28436-4EA0B
IMPORTANT FITMENT CHECK: Nissan used several front roof-console designs on the Qashqai J11, and the 2017 registration year can include both pre-facelift and facelift vehicles. This version has the panoramic-roof blind switch, three front reading/courtesy lights, interior-intrusion sensor vents and the alarm-monitoring OFF button. Match part number 28436-4EA0B, colour, buttons and every electrical connector before ordering.

BUY THE CORRECT PART FIRST TIME

Send your registration or VIN and a clear photograph of your existing unit through eBay messages before purchase if there is any doubt. Visual configuration and the number printed on the old unit are more reliable than a broad vehicle selector alone. A registration check cannot override a different part number, plug or equipment specification.

ACTUAL ITEM PHOTOGRAPHS

Nissan Qashqai J11 front roof light intrusion alarm sensor console 28436-4EA0B front viewTHEPARTPILOT
Actual used roof-console assembly supplied
Panasonic intrusion sensor label showing Nissan part number 28436-4EA0BTHEPARTPILOT
Actual label: 28436-4EA0B | VDF2900B | Made in Japan
Nissan Qashqai roof console side and mounting detailTHEPARTPILOT
Actual side profile, mounting shape and trim colour
Nissan Qashqai roof console rear circuit board and connector viewTHEPARTPILOT
Actual rear electronics and connector arrangement

REFERENCE VEHICLE & FITTING LOCATION

Five door Nissan Qashqai J11 reference vehicleTHEPARTPILOT
Reference vehicle: Nissan Qashqai J11 five-door crossover
Reference photograph showing roof console installed above rear view mirrorTHEPARTPILOT
Reference location: front headlining, above the rear-view mirror
The installed-location photograph is a visual reference only. The supplied used item is shown in the actual-item photographs above. Always match the number, buttons and connectors.

DETAILED PART IDENTIFICATION

Specification Verified detail
Vehicle family Nissan Qashqai second generation, chassis code J11 pre-facelift
Generation years Fitment evidence supports 2014, 2015, 2016 and pre-facelift 2017 donor vehicles; exact equipment and part-number match remains essential
Body style Five-door crossover / SUV
Main Nissan number 28436-4EA0B (also searched without hyphen as 284364EA0B)
Supplier code on item Panasonic VDF2900B
Associated complete-lamp references 26430-4EA7B and 26430-4EA7C are seen on visually similar 2015-2016 complete assemblies containing 28436-4EA0B. Treat these as reference-only numbers, not automatic substitutes.
Label description SEN UNIT-INTRUDE - interior intrusion sensor unit
Position Front centre roof lining, immediately above the rear-view mirror
Colour Grey; compare shade with your headlining because Nissan offered different interior finishes
Included functions visible Three reading/courtesy-light controls, panoramic-roof electric blind switch, alarm intrusion-monitoring OFF switch and interior sensor module
Construction Moulded automotive plastic housing, clear prismatic lamp lens, circuit boards, contacts, wiring, electrical connectors and sensor module; exact plastic resin is not marked
Condition Used. Cosmetic marks, handling wear and storage marks may be present. Study every actual-item photograph before purchase.

COMPATIBILITY CHART

Make Model / generation Years Body Essential specification Status
Nissan Qashqai J11 pre-facelift 2014-2017 5 door Panoramic glass roof with electric blind; factory interior-intrusion alarm; identical grey console, buttons, connector layout and 28436-4EA0B COMPATIBLE WHEN ALL DETAILS MATCH

Engine and gearbox: the console is not selected by engine size, fuel type or transmission. Roof specification, alarm equipment, connector layout and part-number revision are the critical checks.

Other vehicles: no Juke, X-Trail, Pulsar, Renault or other model is confirmed for this exact numbered unit from the available evidence. Do not buy for another model based only on a similar shape.

THIS VERSION WILL NOT FIT

Vehicle / configuration Reason
Nissan Qashqai J10 or Qashqai+2, approximately 2007-2013 Different vehicle generation, roof trim and electronics
Late-2017-on Qashqai J11B facelift, including most 2018-2021 vehicles Later vehicles are found with different overhead-console assemblies and part-number revisions. Only order if the old unit is also 28436-4EA0B and every visual and connector detail matches.
Nissan Qashqai J12 new shape, introduced during 2021 Different generation and console system
J11 without panoramic glass roof / electric blind This console includes the blind-control switch
J11 without factory interior-intrusion alarm monitoring Different sensor, button and wiring configuration may be used
Any unit with a different connector count, pin layout, switch icons, trim shade or part number Not a safe direct-match purchase
Three-door vehicle The Qashqai J11 reference application shown here is the five-door body

WHERE IT IS FITTED & WHAT IT CONTROLS

Front cabin lighting

The clear centre lens and three switch positions provide front courtesy and map/reading-light operation, depending on vehicle wiring and settings.

Panoramic-roof blind

The upper rocker switch commands the electric sunblind fitted beneath the panoramic glass roof. The roof glass itself is fixed on many Qashqai J11 versions; this switch operates the blind.

Interior alarm monitoring

The Panasonic module marked SEN UNIT-INTRUDE monitors movement inside the cabin when the security system is armed. The lower car/OFF button permits temporary deactivation of interior monitoring where supported.

POSSIBLE FAULT SYMPTOMS

  • Front reading or courtesy lights do not illuminate, flicker or operate intermittently.
  • One or more lamp switches feel loose, jammed or fail to respond.
  • The panoramic-roof blind does not respond from the overhead switch, after the motor, fuse and wiring have been checked.
  • The interior-monitoring OFF button does not respond or its indicator function is inconsistent.
  • Vehicle alarm triggers without an obvious cause, or interior intrusion monitoring does not arm correctly.
  • Diagnostic trouble codes or communication faults relating to the interior sensor may be stored.
  • Broken lens, cracked trim, damaged mounting points, water staining or heat damage around the existing console.

Important: these symptoms can also be caused by bulbs, fuses, wiring, connectors, battery voltage, alarm configuration, blind motor faults or another control module. Diagnosis is recommended before replacing parts.

WHY CHOOSE A USED FACTORY-ORIGINAL PART?

Correct integration

Factory connector geometry, switch layout, mounting shape and electronics were designed for the vehicle system. Cheap copies may look similar while differing internally.

Original fit and finish

A matched used assembly can retain the original lamp lens shape, sensor vents, tactile switch action and headlining fit, helping avoid gaps and poor alignment.

Strong value

Buying a serviceable used component can cost substantially less than a new equivalent, with savings of up to 70% possible in some cases. Actual saving varies by part and current new price.

Lower environmental impact

Reusing a working part extends its service life and reduces demand for new raw materials, manufacturing, packaging and disposal.

FITTING GUIDE

Estimated fitting time: approximately 20-45 minutes

Time assumes a direct matching part, straightforward trim removal and no additional diagnosis, wiring repair, coding or seized fasteners.

Suggested tools

  • Non-marking plastic trim-removal levers
  • Small screwdriver or suitable Torx driver only where the vehicle has retaining screws
  • 10 mm spanner for battery terminal, where battery disconnection is appropriate
  • Protective gloves, clean cloth and inspection light
  • Optional diagnostic scan tool for alarm fault-code checks

General installation sequence

  1. Park safely, switch off the ignition, remove the key from the vehicle area and protect the seats and headlining.
  2. Follow the Nissan workshop procedure for battery isolation where required. Be aware that battery disconnection can reset windows, clock and stored settings.
  3. Use a plastic trim tool to release the console carefully. Remove any visible fastener before levering and do not bend the headlining.
  4. Lower the console gently and support it. Photograph the original plugs before disconnecting them.
  5. Release each connector by its locking tab; never pull on the wires.
  6. Compare old and replacement numbers, switches, mounting points, colour, plugs and pin layout side by side.
  7. Connect the replacement and test courtesy lights, reading lights, blind switch and alarm-monitoring OFF function before fully refitting.
  8. Press the console evenly into its retainers, refit fasteners, reconnect the battery if removed and check for stored fault codes.

Safety note: work around headlining trim can be close to curtain-airbag wiring. Stop and use a qualified technician if the removal method, wiring or alarm diagnosis is uncertain. Fitting and garage repair services are available subject to appointment and capacity; enquire through eBay messages.

STATIC GARAGE LABOUR ESTIMATOR - NO ACTIVE CONTENT

ESTIMATED LABOUR = HOURLY RATE x 0.33 TO 0.75 HOURS

Garage labour rate Approx. 20 minutes Approx. 45 minutes
£40 per hour £13.20 £30.00
£60 per hour £19.80 £45.00
£80 per hour £26.40 £60.00
£100 per hour £33.00 £75.00
£120 per hour £39.60 £90.00

Illustrative labour only. Garage minimum charges, diagnosis, coding, electrical repair, VAT, consumables and the part price are excluded.

THEPARTPILOT STOCK, WORKSHOP & DISPATCH

Illustrative warehouse stock and organised parts logisticsTHEPARTPILOT
25,000+ parts held in stock and ready for order processing
Illustrative vehicle workshop and repair serviceTHEPARTPILOT
Fitting and vehicle repairs available subject to workshop availability
Illustrative boxed items prepared for dispatchTHEPARTPILOT
Orders are packed for safe tracked dispatch
Warehouse, workshop and dispatch photographs in this section are illustrative stock imagery and are not photographs of the exact item.

COLLECTION, DELIVERY & CHECKOUT ADDRESS

Collection

Collection is available by prior appointment seven days a week until 8 pm, including bank holidays when arranged in advance. Use eBay messages to agree availability before travelling.

UK and international delivery

Worldwide delivery is available to eligible destinations through eBay's Global Shipping Programme. eBay calculates the available service, international postage, duties and taxes at checkout.

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

CURRENT EBAY GLOBAL SHIPPING PROGRAMME DESTINATIONS

EU: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

Non-EU: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.

Destination coverage, item eligibility, value limits and services are controlled by eBay and can change. The definitive availability and total cost are those displayed to the buyer at checkout.

VAT, RETURNS & WARRANTY INFORMATION

VAT: Where applicable, this used item is sold under the Global Accounting VAT Margin Scheme. VAT is accounted for within the margin and is not shown separately or reclaimable by the buyer.

Returns: Returns are governed by the return policy displayed on the eBay listing and applicable consumer law. Choose an accurate return reason and return the complete item in the condition supplied. Faults, damage in transit or listing errors are handled through the eBay return process.

Warranty: The listing item specifics show a 30-day seller warranty. Warranty does not cover incorrect purchase, external wiring faults, water ingress from the vehicle, misuse, accidental damage or fitting damage.

Fitment support: Ask through eBay messages before purchase. Provide the VIN, registration, old part number, connector photographs and a clear view of the complete existing roof console.

SUPPORT A LOCAL SMALL BUSINESS & REUSE WORKING PARTS

Every reused component helps keep a serviceable part in circulation and can reduce the raw materials, energy, packaging and transport associated with manufacturing a new replacement. Your purchase supports a local independent automotive recycler while helping another vehicle remain on the road.

REUSESAVE MONEYREDUCE WASTESUPPORT SMALL BUSINESS

You may also like