Peugeot 1007 1.4 HDi 2005-2009 MAF Sensor Air Flow Meter 9647144080 VDO 5WK97004

Peugeot 1007 1.4 HDi 2005-2009 MAF Sensor Air Flow Meter 9647144080 VDO 5WK97004

£23.53
Skip to product information
Peugeot 1007 1.4 HDi 2005-2009 MAF Sensor Air Flow Meter 9647144080 VDO 5WK97004

Peugeot 1007 1.4 HDi 2005-2009 MAF Sensor Air Flow Meter 9647144080 VDO 5WK97004

£23.53
THEPARTPILOT
FITMENT-FIRST USED VEHICLE PARTS
PEUGEOT 1007 1.4 HDi
MAF SENSOR / AIR FLOW METER
9647144080   |   Siemens VDO 5WK97004
IMPORTANT - FITMENT VERIFIED FROM THE PHYSICAL PART NUMBER
The physical label visible on this item identifies it as PSA 9647144080 / Siemens VDO 5WK97004. Fitment in this description is based on that photographed identification, not simply on an eBay model/year entry.
PRIMARY APPLICATION:
Peugeot 1007 (KM_) 1.4 HDi 68 hp - 2005 to 2009
DO NOT order this part simply because you own a Peugeot 1007. Your engine, VIN, connector and existing part number must agree.
Actual Item - Identification Photographs
Actual Siemens VDO MAF label showing 9647144080 and 5WK97004 Actual used MAF air flow meter supplied
These photographs show the actual used component. Please compare the label, connector and housing with your old part before ordering.
Correct Peugeot 1007 Body-Style Reference
The primary application is the distinctive Peugeot 1007 3-door hatchback with sliding side doors. These photographs are for body-style reference only and are not photographs of the donor vehicle.
Peugeot 1007 reference vehicle Peugeot 1007 reference vehicle showing sliding side door
Public-domain Peugeot 1007 reference photographs. Reference vehicle only - not the item or donor vehicle.
Part Identification & Technical Details
Part Type Mass Air Flow Meter / MAF Sensor Assembly
PSA Number On Item 9647144080
Siemens VDO Number 5WK97004
Connector 4 pin
Housing Diameter Approx. 60 mm catalogue specification
Material Marking PBT-GF30 marking visible on component
Country Marking Made in Germany marking visible on label
Position Engine air-intake system, downstream of air-filter housing
Condition Used - supplied as photographed
Warranty 30 days, as stated in this listing
Where Is This Part Fitted?
The MAF is installed in the engine's intake-air path immediately after the air-filter section and before the downstream intake/turbo system.
AIR FILTER THIS MAF SENSOR TURBO / INTAKE ENGINE
The sensor measures incoming air so the engine-management system can use airflow information as part of its fuelling and air-management strategy. Exact control strategy varies by engine calibration.
Primary Peugeot 1007 Fitment
Vehicle Engine Power Years
Peugeot 1007 (KM_) 1.4 HDi / DV4TD / 8HZ application 68 hp 2005-2009
1007 EXCLUSIONS: This listing does not claim compatibility with a Peugeot 1007 merely because the vehicle is within the model range. It is specifically listed around the 1.4 HDi 68 hp application and the physical references 9647144080 / 5WK97004. Petrol engines, other diesel engines, a different connector or a different airflow-meter reference must not be assumed compatible.
CHECK BEFORE ORDERING - REDUCE WRONG-PART RETURNS
1. Compare your existing sensor number with 9647144080 / 5WK97004.
2. Compare the 4-pin electrical connector and complete housing shape.
3. Confirm your exact engine application, not only registration year.
4. If there is any doubt, send us your full 17-character VIN and a clear photograph of your existing sensor through eBay Messages before ordering.

We can use the VIN and physical part identification to verify fitment. Never rely solely on a registration lookup or broad model/year description where a part-number check is available.
Part-Number Cross-Application Chart
The applications below are catalogue cross-applications for this MAF part-number family. They are provided to help identify compatible vehicles, but they do not override a VIN and old-part-number check. Manufacturing changes can occur within a production run.
Make / Model Engine Catalogue Application
Peugeot 1007 (KM_) 1.4 HDi 68 hp 2005-2009 - PRIMARY
Citroen C1 (PM_, PN_) 1.4 HDi 54 hp Jun 2005-Sep 2014
Citroen C2 (JM_) 1.4 HDi 68 hp Jul 2003-Dec 2009
Citroen C2 (JM_) 1.4 HDi 69 hp Sep 2003-Apr 2005
Citroen C2 Enterprise (JG_) 1.4 HDi 68 hp Sep 2006-Dec 2009
Citroen C2 Enterprise (JG_) 1.4 HDi 69 hp Nov 2003-Apr 2005
Citroen C3 I (FC_, FN_) 1.4 HDi 68 hp Feb 2002-Dec 2009
Citroen C3 I (FC_, FN_) 1.4 HDi 75 hp May 2005-Dec 2009
Citroen C3 II (SC_) 1.4 HDi 70 / 68 hp Nov 2009-Sep 2016
Citroen C3 II Hatchback Van (SC_) 1.4 HDi 68 hp Jun 2010-Sep 2016
Ford Fiesta V (JH_, JD_) 1.4 TDCi 68 hp Nov 2001-Jun 2008
Ford Fiesta V Van 1.4 TDCi 68 hp Oct 2003-Dec 2010
Ford Fiesta VI (CB1, CCN) 1.4 TDCi 68 hp Aug 2008-Sep 2012
Ford Fiesta VI (CB1, CCN) 1.4 TDCi 70 hp Jul 2010-Sep 2012
Ford Fiesta VI Van 1.4 TDCi 68 hp Jan 2009-Apr 2017
Ford Fusion (JU_) 1.4 TDCi 68 hp Aug 2002-Dec 2012
Peugeot 107 (PM_, PN_) 1.4 HDi 54 hp Jun 2005-May 2014
Peugeot 206+ (2L_, 2M_) 1.4 HDi eco70 68 hp Jan 2009-Jun 2013
Peugeot 206 Hatchback (2A/C) 1.4 HDi 69 hp Sep 2002-Feb 2007
Peugeot 206 Hatchback (2A/C) 1.4 HDi eco70 68 hp Sep 2001-Apr 2009
Peugeot 206 SW (2E/K) 1.4 HDi 68 hp Jul 2002-Feb 2007
Peugeot 206 Van 1.4 HDi 68 hp Sep 2001-Mar 2009
Peugeot 207 (WA_, WC_) 1.4 HDi 68 hp Feb 2006-Dec 2015
Toyota Aygo (B1 / WNB10) 1.4 D-4D 54 hp Jul 2005-Aug 2010
Certain additional 1.4 HDi applications such as some Bipper/Nemo derivatives are cross-referenced in parts catalogues, but they are deliberately not assigned an exact fitment claim here because the source data reviewed did not provide a sufficiently precise derivative/date range. Contact us with the VIN and old-part photograph instead.
Reference Numbers
PRIMARY NUMBERS VISIBLE / RELEVANT TO THIS ITEM
PSA 9647144080
Siemens VDO 5WK97004
Catalogue cross-references include:

PSA: 1920GG
Siemens: 5WK97004Z
Ford: 1348615, 1333637, 2S6Q12B579BA, 2S6Q12B579BB
Hella: 8ET009142111
Delphi: AF10188-12B1
Pierburg: 7.22184.29, 7.22184.29.0
Valeo: 366293
Secondary reference numbers are included to assist identification. Do not order solely because one secondary number appears in another catalogue. Match the physical component and VIN wherever possible.
Possible Symptoms Of A Faulty MAF Sensor
Engine-management warning light Reduced power or poor acceleration
Rough running, unstable idle or stalling Increased fuel consumption
Incorrect airflow readings MAF-related diagnostic codes such as P0100-P0104
These symptoms can also be caused by wiring faults, intake leaks, air-filter problems and other engine-management faults. Proper diagnosis should be carried out before replacing parts.
Why Choose A Matching Original Manufacturer-Spec Used Part?
A correctly matched original manufacturer-spec used component preserves the factory-style connector, housing dimensions, airflow path and part-number reference used for the vehicle application.
This is particularly important with engine-management sensors, where buying an unknown-spec alternative solely because it looks similar can introduce uncertainty over calibration, connector configuration and physical fit.
Buying a quality used component can also provide a substantial saving over purchasing the equivalent part new. The exact saving varies by vehicle, component and current new-part market price, so we do not make a fixed percentage saving claim for every item.
General Fitting Guide
The following is a general MAF replacement guide. It is not a substitute for the manufacturer workshop procedure for your exact VIN.
STEP 1
Switch the ignition off, remove the key and allow the engine to cool.
STEP 2
Locate the MAF in the intake duct immediately downstream of the air-filter housing. Compare the old sensor number, housing and 4-pin connector first.
STEP 3
Release the electrical connector carefully using its locking mechanism. Inspect the terminals and wiring for corrosion or damage.
STEP 4
Release the intake-hose clamps and any retaining fasteners fitted to your exact vehicle. Fastener type and size can vary by application.
STEP 5
Remove the old unit without touching or contaminating the sensing area. Note the airflow orientation before removal.
STEP 6
Inspect the air-filter installation, intake hoses, seals and clamps. Air leaks should be rectified before diagnosis is considered complete.
STEP 7
Install the replacement in the same orientation, refit the ducting, reconnect the electrical plug and secure all clamps/fasteners correctly. Do not overtighten plastic components.
STEP 8
Start the engine, check the intake for leaks and use suitable diagnostic equipment to recheck or clear relevant fault codes where appropriate.
Typical Tools & Estimated Repair Time
Typical Tools Basic ratchet/socket set, suitable screwdriver/driver for intake clamps, connector/trim pick if required, torch
Recommended Diagnostic Tool OBD diagnostic scanner
Planning Time Approx. 15-30 minutes for a straightforward replacement
This is a planning estimate, not a manufacturer flat-rate labour time. Corroded fittings, access issues, diagnosis, damaged wiring or intake repairs can increase workshop time.
Garage Labour Cost Estimator
No JavaScript calculator is used because active content is not used in our eBay description. Use the static guide below: garage hourly rate x labour time = estimated labour charge.
Garage Rate 15 Minutes / 0.25 hr 30 Minutes / 0.50 hr
£50/hr £12.50 £25.00
£60/hr £15.00 £30.00
£75/hr £18.75 £37.50
£90/hr £22.50 £45.00
£100/hr £25.00 £50.00
£120/hr £30.00 £60.00
£150/hr £37.50 £75.00
Illustration only. Diagnosis, parts, consumables, taxes and additional repairs are not included.
Fitting Service May Be Available
We may be able to provide fitting or repair assistance subject to workshop availability. Please ask through eBay Messages before purchase if fitting is required. Fitting is not included in the item price unless specifically agreed.
UK & International Delivery
International delivery may be available through eBay's Global Shipping Programme. Destination eligibility, shipping price, customs/import charges and any product restrictions are ultimately determined by eBay at checkout.
EU destinations currently listed by eBay:
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Other eligible destinations currently listed by eBay:
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
Destination list checked August 2026. eBay can change programme eligibility, restrictions and destination availability; the checkout result is final.

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

Local Collection
Collection available 7 days a week until 8pm by prior appointment.
Bank-holiday collection may also be possible by prior appointment. Please arrange collection through eBay Messages. Collection remains subject to availability and eBay's collection/payment procedure.
VAT Information
Where applicable, this used item is sold under the VAT Global Accounting / margin scheme. VAT is accounted for under the scheme and is not shown separately on the sales invoice.
Returns & Fitment Responsibility
Our priority is helping customers order the correct part first time. Please use the part number, photographs, compatibility chart and VIN-check service before purchase.
Returns are handled in accordance with the return policy shown on the eBay listing and applicable eBay/consumer requirements. Where eBay permits a deduction because an item is returned used, altered, damaged, incomplete or otherwise in a different condition, any deduction will reflect the actual loss in value and the amount permitted by eBay.
There is not an automatic fixed 50% deduction simply because a buyer selected a particular return reason.
Unsure about compatibility? Send your 17-character VIN and a clear photograph of your old part/label through eBay Messages before ordering.
THEPARTPILOT
More Than 25,000 Parts In Stock & On The Shelf
Our focus is accurate part identification, detailed compatibility information and helping buyers select the correct component before dispatch. If you are uncertain, ask us for a VIN and part-number check through eBay Messages before buying.
Support Reuse. Support A Local Small Business.
Choosing a serviceable used vehicle component keeps an existing part in productive use rather than automatically replacing it with a newly manufactured component.
Reusing parts can help reduce unnecessary waste, extend the useful life of existing vehicle components and support the circular economy. Your purchase also supports an independent local automotive-parts business.
REUSE   |   REPAIR   |   RECYCLE
ORDER THE CORRECT PART FIRST TIME
Match 9647144080 / 5WK97004 + connector + physical shape + engine application. If uncertain, send your full VIN and old-part photograph through eBay Messages.
THEPARTPILOT
Fitment-first used vehicle parts | Detailed identification | International eBay delivery

You may also like