Peugeot 1007 2005-2009 Lower Centre Console Handbrake Cup Holder Trim

Factory-fit style lower centre floor console / handbrake-surround trim with integrated storage and cup-holder recesses. This is the long moulded console shown in the actual photographs below.

Confirmed vehicle family: Peugeot 1007, chassis family KM_, model years 2005-2009, 3-door body with sliding side doors. The 1007 was not a 5-door model.

Photos and physical shape take priority over automated compatibility data. Compare the complete outline, long handbrake opening, cup/storage recesses, side vent detail, mounting points and colour/texture with your existing console before buying.

If anything differs, do not order until fitment has been checked through eBay Messages using your VIN/registration and a clear photo of your old part.

ACTUAL ITEM PHOTOGRAPHS

These photographs are from eBay item 147479020733. Inspect them closely for exact shape, colour marking, clip positions and cosmetic condition.

THEPARTPILOT • ACTUAL ITEM

THEPARTPILOT • ACTUAL ITEM

THEPARTPILOT • ACTUAL ITEM

THEPARTPILOT • ACTUAL ITEM

REFERENCE VEHICLE & WHERE THIS PART FITS

Reference images are supplied only to identify the correct Peugeot 1007 3-door body and the centre-console area. They are not photographs of the donor vehicle.

Correct body reference: Peugeot 1007, 3-door with sliding side doors. Image: Dogs.barking.duster.rolling, Wikimedia Commons, CC BY-SA 4.0.

Location reference: the lower centre tunnel / handbrake-console area between the front seats. This reference cabin is left-hand drive; use it for location only. Image: Affemitwaffe, Wikimedia Commons, CC BY-SA 3.0.

ITEM DETAILS & SPECIFICS

PART NUMBER / REFERENCE CHECK

9641006877 is repeatedly listed against visually matching Peugeot 1007 centre consoles and appears on 1007 donor listings from multiple model years. However, that number is not visible in the photographs of this exact item, and the same number is also used in some marketplace data for visually different Citroën interior pieces.

Therefore 9641006877 is provided as a reference-to-check, not as a guaranteed manufacturer part number for this exact item. Match your existing console by photograph, mounting layout and any number moulded into the rear/underside before ordering.

Other comparison IDs seen on a matching commercial listing: 18M6302016, 96595, 6282035. These are not verified manufacturer supersession numbers. No confirmed superseded part number has been established.

PARTS COMPATIBILITY CHART

The confirmed vehicle family is the Peugeot 1007 KM_ 3-door, 2005-2009. This lower trim is not an engine-management component, so engine size is not the primary fitment discriminator. Final fitment is conditional on your old console having the same physical layout, colour/texture and fixing points as the item photographed.

1007 ENGINE REFERENCES — ENGINE AVAILABILITY VARIED BY YEAR / MARKET

DO NOT ASSUME FITMENT TO THESE VEHICLES

Other confirmed vehicle models: none found that can be safely advertised from the available photographs and reference data. This is deliberately conservative to reduce wrong orders and returns.

BUYER MATCHING CHECKLIST — ORDER CORRECTLY FIRST TIME

WHERE IT FITS, WHAT IT DOES & WHEN TO REPLACE IT

This moulded trim fits along the centre floor tunnel between the front seats, surrounding the handbrake/parking-brake area and providing storage/cup-holder recesses while covering fixings and unfinished lower-tunnel areas.

It is not an electronic control module and does not control the engine, airbags, sliding doors, gearbox or other vehicle electronics.

Typical reasons for replacement:

A correct factory-fit style recycled component is designed around the vehicle's original mounting geometry, texture and clip positions. Very low-cost pattern alternatives can differ in stiffness, finish or fixing accuracy. Matching the original physical design helps restore a secure fit and reduce rattles or misalignment.

FITTING GUIDE, TOOLS & ESTIMATED REPAIR TIME

Estimated workshop time: approximately 0.5-1.0 hour for a competent fitter, depending on seized fixings, broken clips, trim already removed and whether inserts need transferring. This is an estimate rather than a manufacturer flat-rate time.

Recommended tools: plastic trim-removal tools, 10mm socket and ratchet/extension, small pick or protected flat screwdriver, torch and protective cloth. Keep a 13mm socket/spanner and small Torx set available for adjacent trim variations; verify every fastener size before applying force.

Fitting service: fitting may be available subject to workshop capacity. Please ask through eBay Messages before purchase to check availability.

GARAGE LABOUR COST CALCULATOR — STATIC / NO ACTIVE CONTENT

Formula: hourly labour rate × estimated time. Example range below is based on 0.5-1.0 hour labour only and excludes the part, consumables, diagnostics and any taxes/fees applicable to the garage.

WHY CHOOSE A RECYCLED FACTORY-FIT PART?

A recycled factory-fit component was designed for the original vehicle's mounting points, clearances, clip locations and surrounding trim. Correct physical fit can be a major advantage over a low-cost pattern copy where material stiffness, texture, colour, shape or fixing detail may differ.

Recycled parts can also cost substantially less than equivalent new components. Depending on the part and the current new-part price, savings can sometimes approach 70%. Always compare current pricing for the specific component.

INTERNATIONAL DELIVERY THROUGH EBAY

This listing is enrolled for eBay international delivery. eBay is upgrading UK GSP sellers to eBay International Shipping in phases from August 2026, so the programme shown at checkout may vary. Checkout availability is definitive and may change by item, category, destination or programme eligibility.

Current published GSP EU destinations:

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

Current published GSP non-EU destinations:

Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, El Salvador, Egypt, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Russia, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad & Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA, Vietnam.

ORDER, ADDRESS & RETURN-REDUCTION NOTICE

Delivery address: make sure the address shown at eBay checkout is correct before payment. We cannot amend the delivery address after checkout on your behalf.

Fitment responsibility: use the photographs and matching checklist above before ordering. If uncertain, ask us through eBay Messages so we can help check fitment before dispatch.

Returns: returns are handled under the return settings shown on the eBay listing and applicable consumer law. Please return any approved item in the same condition in which it was received, with all supplied components.

SUPPORT A LOCAL SMALL BUSINESS • REUSE MORE • WASTE LESS

Buying a quality recycled vehicle component helps keep serviceable parts in use, reduces demand for new raw materials and prevents perfectly usable components being discarded prematurely. Every correct-fit purchase also supports an independent local automotive parts business and helps us continue inspecting, cataloguing, protecting and dispatching parts to customers in the UK and worldwide.

WhatsApp QR for Fitment Help / Appointment Enquiries