Peugeot 308 MK1 T7 2007-2014 Fuel Filler Flap Cover Door 9680363377 3/5DR
Peugeot 308 MK1 T7 2007-2014 Fuel Filler Flap Cover Door 9680363377 3/5DR
Fuel Filler Flap / Fuel Door Cover
Used original-equipment Peugeot component removed from a vehicle and offered as a replacement for the corresponding Peugeot 308 Mk1/T7 fuel filler flap.
Compare the photographs, flap shape, mounting arrangement and reference number before ordering. If you are unsure, contact ThePartPilot with your 17-character VIN before purchase. We do not recommend ordering from registration number alone.
🚘 Vehicle Reference — Peugeot 308 Mk1 / T7
Reference vehicle photographs are supplied to help identify the correct generation/body. They are not photographs of the donor vehicle or the item being sold.
✓ COMPATIBILITY GUIDE
| Make | Model | Generation | Years | Body | Reference |
|---|---|---|---|---|---|
| Peugeot | 308 | Mk1 / T7 / 308 I | 2007–2014* | Hatchback 3/5 door* | 9680363377* |
Known 308 I/T7 engine families represented in the existing compatibility data include:
1.4 16V petrol • 1.6 16V petrol • 1.6 HDi diesel • 2.0 HDi diesel. Fuel-flap fitment is primarily determined by body/chassis and component design rather than engine capacity, but engine selection alone must never be used as proof of compatibility.
✕ Do NOT assume it fits:
✕ Peugeot 308 SW unless your existing assembly/reference is positively confirmed identical
✕ Peugeot 308 CC without positive reference/VIN confirmation
✕ Peugeot 307, 3008 or other Peugeot models merely because the colour looks similar
✕ Any vehicle where the mounting points, flap profile or reference differ
✕ A vehicle selected solely by registration lookup without checking the actual component
Unsure? Send us your VIN and, ideally, a clear photograph of the existing flap/hinge and its number. We will help verify the application before you order.
📍 Where Is This Part Fitted?
The fuel filler flap is installed into the vehicle's rear quarter-panel fuel-filler aperture. It forms the exterior body-coloured access door covering the fuel filler area.
⚙️ What Does It Do?
The flap provides the finished exterior closure for the fuel-filling aperture. It protects the filler area from direct exposure to dirt and road contamination while maintaining the intended exterior appearance and body profile of the Peugeot 308.
⚠️ Symptoms of a Damaged Fuel Flap
Common reasons for replacement include a cracked or broken flap, damaged hinge or mounting points, flap sitting proud of the bodywork, difficulty opening or closing, impact damage, missing flap, severe scratches, paint damage or a replacement being required following rear-quarter body repairs.
Why Choose an Original-Equipment Used Part?
A used factory-supplied component gives you the same fundamental design, mounting geometry and body profile originally engineered for the relevant vehicle application. Cheap pattern copies can vary in moulding, mounting accuracy, surface finish and material quality.
Reusing a serviceable original-equipment component can also represent a substantial saving compared with purchasing a new replacement. Depending on the component and current new-part pricing, used automotive parts can offer very significant savings — in some cases approaching 70%.
Important: this is a used body component. Expect normal age/storage marks consistent with a previously fitted item. Always inspect the listing photographs for the actual condition and colour. Paint shade can vary because of age, UV exposure and previous paintwork.
🔧 Fitting Guide
Typical difficulty: DIY / light mechanical-bodywork task, depending on the supplied assembly.
- Park safely, switch the ignition off and secure the vehicle.
- Open the existing fuel filler flap.
- Inspect the hinge/retaining arrangement and compare it directly with the replacement.
- Protect the surrounding painted quarter panel with suitable masking/protection.
- Release the appropriate retaining clips/fasteners without forcing the surrounding filler housing.
- Remove the existing flap or assembly.
- Transfer any required reusable clips or trim only where applicable.
- Install the replacement into the original mounting points.
- Check panel alignment and ensure the flap opens and closes freely.
- Before driving, confirm the fuel filler cap and filler area remain correctly secured.
Typical Tools
Plastic trim-removal tool • small flat trim tool • suitable Torx/socket tools where applicable • protective tape • gloves • inspection light.
💷 Garage Labour Estimator
A simple flap replacement may be a relatively short body/trim operation. Allow approximately 0.25–0.50 labour hour as a planning estimate where no additional repair, paintwork or damaged mounting hardware is involved.
| Garage Rate | 15 Minutes | 30 Minutes | 1 Hour |
|---|---|---|---|
| £50/hour | £12.50 | £25 | £50 |
| £75/hour | £18.75 | £37.50 | £75 |
| £100/hour | £25 | £50 | £100 |
| £125/hour | £31.25 | £62.50 | £125 |
| £150/hour | £37.50 | £75 | £150 |
Formula: garage hourly rate × labour time. Estimates are illustrative only; obtain a quotation from your chosen repairer.
ThePartPilot can also offer fitting/repair services subject to workshop availability and prior arrangement.
Workshop & Fitting Support
Need more than the part? Ask about our fitting and vehicle repair service. All workshop appointments are subject to availability and must be arranged in advance.
🏭 More Than 25,000 Parts In Stock
With more than 25,000 automotive parts on the shelf at any one time, ThePartPilot specialises in helping motorists keep vehicles on the road using quality reusable components.
Warehouse image is illustrative/reference imagery and does not depict ThePartPilot's actual premises.
📦 Collection Available 7 Days A Week
Collections available by prior appointment until 8:00 PM, 7 days a week, including Bank Holidays by prior arrangement.
Scan the QR code with your phone camera to contact ThePartPilot on WhatsApp for collection, fitting or compatibility enquiries.
🌍 International Delivery
International delivery is available through eBay's eligible international shipping programme where offered for the item and buyer destination. Eligibility, charges, customs duties and availability are determined at checkout.
Typical GSP destinations currently include Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, USA, New Zealand, Japan, Hong Kong, Singapore, South Korea, UAE, Switzerland, Norway and numerous additional supported destinations.
📮 Important Delivery Address Information
Please check your delivery address carefully BEFORE completing checkout. For transaction security, orders must be dispatched to the address supplied through the eBay order. We cannot simply redirect an order to a different address after checkout.
↩️ Returns & Correct-Part Ordering
Our objective is to supply the correct part first time. Please use the photographs, reference numbers, compatibility information and VIN verification service before ordering.
Returns are handled in accordance with the return terms shown on the eBay listing, eBay Money Back Guarantee requirements and applicable consumer law. Where an eligible returned item has been used, damaged, altered or otherwise returned in a condition that causes a loss in value, any permitted deduction will be handled strictly in accordance with eBay's rules.
VAT / MARGIN SCHEME
Used goods may be supplied under the applicable VAT margin scheme. Where the margin scheme applies, VAT is not separately itemised or reclaimable on the purchase price.
WE BUY CARS FOR CASH
Selling a vehicle? ThePartPilot also buys cars with nationwide collection and same-day payment, subject to vehicle assessment and agreed terms.
Support Reuse. Support Small Business.
Buying a quality used vehicle component keeps an existing part in productive use, reduces unnecessary waste and can reduce demand for manufacturing and transporting a replacement component. It also supports an independent UK automotive parts business.
Thank you for choosing ThePartPilot. 💚
📦 Carefully Prepared For Dispatch
Components are prepared for dispatch with the aim of protecting vulnerable mounting points, trims and surfaces during transportation.
Warehouse/dispatch photograph is illustrative and does not depict ThePartPilot's premises.
Reference vehicle images are for model identification only.
Manufacturer names and trademarks remain the property of their respective owners.