Renault Twingo II 2007-2014 1.2 Thermostat Housing 8200660882 7700110716
Renault Twingo II 2007-2014 1.2 Thermostat Housing 8200660882 7700110716
Renault Twingo II 2007-2014 1.2
Thermostat / Coolant Housing
Used original-manufacturer Renault cooling-system component removed from a vehicle and offered as a replacement part. Please match the part number, casting, connections and your VIN before ordering.
Vehicle model and registration alone are not sufficient to guarantee compatibility. Renault used different cooling-system components according to engine, production date and vehicle specification.
Please compare the photographs of the actual item with your existing component and check the number 8200660882. If you are unsure, send us your full 17-character VIN through eBay Messages and we can check compatibility before purchase.
PART IDENTIFICATION
| Manufacturer | Renault |
| Component | Coolant Thermostat / Thermostat Housing |
| Primary Part Number | 8200660882 |
| Number shown in listing | 82 00 660 882 A |
| Associated reference | 7700110716 — verify against VIN before interchange |
| System | Engine cooling system |
| Thermostat specification | 89°C catalogue specification |
| Housing material | Synthetic / moulded material construction |
| Condition | Used — expect normal age and cosmetic marks |
RENAULT TWINGO II FITMENT GUIDE
| Vehicle | Years | Engine | Body | Check |
| Twingo II CN0 | 2007-2014 | 1.2 petrol | 3-door hatchback | VIN / number |
| Twingo II CN0 | 2007-2014 | 1.2 16V petrol | 3-door hatchback | VIN / number |
| Twingo II CN0 | 2007-2014 | 1.2 Turbo petrol | 3-door hatchback | VIN / number essential |
Twingo II 1.5 dCi diesel or Twingo Renaultsport 1.6 16V simply because the vehicle is a Twingo II. Do not order for these applications without a confirmed VIN/part-number match.
CROSS-MODEL APPLICATION INFORMATION
Catalogue references for 8200660882 also appear across selected vehicles below. This is provided to help identify the component — it is not permission to order by model alone. Engine and VIN confirmation remain required.
| Make | Model Family | Relevant Engine Family | Verification |
| Renault | Clio II | Selected 1.2 petrol | VIN required |
| Renault | Clio III | Selected 1.2 petrol / D4F | VIN required |
| Renault | Modus / Grand Modus | Selected 1.2 petrol | VIN required |
| Renault | Kangoo I | Selected 1.2 petrol | VIN required |
| Renault | Twingo I | Selected 1.2 petrol | VIN required |
WHAT DOES THIS PART DO?
The thermostat assembly forms part of the engine cooling circuit. It helps regulate coolant flow between the engine and radiator so that the engine reaches and maintains its intended operating temperature.
When the engine is cold, thermostat control helps the engine warm efficiently. As coolant temperature increases, coolant flow through the radiator is regulated to prevent excessive engine temperature.
Correct thermostat operation is therefore important for engine temperature control, cabin-heater performance, fuel efficiency and protection against overheating.
🔧 POSSIBLE SYMPTOMS OF A FAULT
- Coolant leaking around the thermostat housing or sealing surface
- Engine taking unusually long to reach operating temperature
- Engine running hotter than normal
- Temperature gauge behaving inconsistently
- Poor or inconsistent cabin heater performance
- Coolant level repeatedly dropping
- Visible cracking, distortion or deterioration around the housing
- Cooling-system warning or overheating symptoms
These symptoms can also be caused by other cooling-system faults. Proper diagnosis should therefore be carried out before replacing components.
WHY CHOOSE AN ORIGINAL-MANUFACTURER USED PART?
An original-manufacturer component was engineered around the vehicle's original cooling-system geometry, hose connections, mounting points and operating requirements.
Correctly identified used original parts can offer excellent value compared with purchasing the equivalent component new, while also reusing an existing serviceable component rather than manufacturing another replacement.
Depending on the component and current new-part price, purchasing used vehicle parts can represent substantial savings — in some cases as much as 70% compared with new.
FITTING OVERVIEW
Estimated workshop time: approximately 0.75-1.5 hours depending on engine specification, access, corrosion and workshop equipment.
Typical tools:
- Socket and ratchet set
- Suitable extensions
- Hose-clamp pliers / suitable pliers
- Torque wrench
- Coolant drain container
- Cleaning materials
- Manufacturer-approved coolant
- Suitable replacement seals/gaskets where required
General procedure:
- Allow the engine to become completely cold.
- Safely depressurise the cooling system.
- Drain sufficient coolant into an appropriate container.
- Remove components obstructing access where required.
- Disconnect the relevant coolant hoses.
- Remove the thermostat/housing fasteners.
- Remove the old assembly and inspect the sealing surface.
- Install the replacement component with appropriate seals.
- Tighten fasteners to the manufacturer's specification for the exact engine.
- Reconnect hoses and removed components.
- Refill with the correct coolant.
- Bleed the cooling system according to the vehicle repair procedure.
- Run to operating temperature and carefully inspect for leakage.
- Recheck coolant level once completely cold.
💷 ESTIMATED GARAGE LABOUR COST
eBay descriptions cannot safely use JavaScript, so the table below provides an instant labour estimate instead. Actual quotations vary by garage and vehicle.
| Hourly Rate | 0.75 Hour | 1 Hour | 1.5 Hours |
| £50/hr | £37.50 | £50 | £75 |
| £70/hr | £52.50 | £70 | £105 |
| £90/hr | £67.50 | £90 | £135 |
| £120/hr | £90 | £120 | £180 |
Formula: Garage hourly labour rate × actual fitting time = estimated labour charge.
We can also provide fitting and vehicle repair services subject to workshop availability. Please contact us through eBay Messages before travelling or making arrangements.
BUY THE CORRECT PART FIRST TIME
One of the most common reasons vehicle parts are returned is incorrect compatibility identification. We want to prevent that before your order leaves our warehouse.
- Your existing part number.
- The shape and mounting points against our actual-item photographs.
- Hose and electrical connections where applicable.
- Your exact engine specification.
- Your VIN where any uncertainty remains.
If you are uncertain, send your full 17-character VIN through eBay Messages before purchasing. We would rather verify the application first than have you order an incorrect component.
RETURNS & PART CONDITION
Please use the fitment information and actual-item photographs before ordering. Returns are handled in accordance with the return policy shown on this eBay listing and applicable eBay rules.
Items should be returned in the condition received. Where an eligible return is received used, altered, damaged or incomplete, any permitted reduction in refund will be assessed according to eBay's applicable returned-item condition rules and the actual loss in value.
📦 DELIVERY & INTERNATIONAL ORDERS
UK delivery is available through the postage services displayed on this listing. Eligible international orders may be processed through eBay's international shipping programme. Destination availability and charges are determined by eBay at checkout.
Important: Please ensure your delivery address is completely correct before checkout. Orders must be dispatched to the address supplied with the eBay transaction and we cannot manually substitute a different delivery address after purchase.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
This used item is supplied under the applicable margin scheme. VAT is not separately charged or shown as a recoverable VAT amount on the item price.
ThePartPilot maintains a substantial inventory of used vehicle components ready for picking, packing and dispatch. If you require another component for the same vehicle, please view our other eBay listings or contact us through eBay Messages.
ThePartPilot also purchases vehicles for cash, with nationwide collection and same-day payment available subject to vehicle assessment and agreed terms. Please contact us through the appropriate eBay communication channel where applicable.
REUSE PARTS • REDUCE WASTE • SUPPORT SMALL BUSINESS
Choosing a serviceable used component keeps an existing vehicle part in productive use and can reduce demand for newly manufactured replacements. Reusing automotive components helps extend the useful life of vehicles and prevents suitable parts from being unnecessarily discarded.
Every purchase also supports an independent UK automotive parts business and the people involved in identifying, storing, picking, packing and dispatching thousands of components. Thank you for supporting ThePartPilot.