SEAT Ibiza 6L 6J 6P 2002-2017 Heater Blower Fan Resistor 4 Pin 6Q0959263A
£13.42
Skip to product information
SEAT IBIZA 6L / 6J / 6P
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
SEAT Ibiza 6L 6J 6P 2002-2017 Heater Blower Fan Resistor 4 Pin 6Q0959263A
£13.42
THEPARTPILOT
AUTOMOTIVE PARTS • FITMENT SUPPORT • UK BASED BUSINESS
25,000+ PARTS IN STOCK
FITMENT SUPPORT
FITTING AVAILABLE*
Heater / Ventilation System
SEAT IBIZA 6L / 6J / 6P
HEATER BLOWER MOTOR FAN RESISTOR
2002–2017 APPLICATION WINDOW • 4-PIN FAMILY
Cross-reference family: 6Q0 959 263 A / 6Q0959263A
⚠️ PLEASE CHECK FITMENT BEFORE ORDERING
Do not purchase by registration year alone.
SEAT used different heater / air-conditioning configurations within the same model year.
Your original resistor, electrical connector, mounting arrangement and HVAC specification
must match the photographs and information below.
BEST MATCHING METHOD:
1. Compare your original part number.
2. Compare the 4-pin electrical plug.
3. Compare housing shape and fixing points.
4. Confirm your heater / air-conditioning control type.
5. If unsure, send us your registration/VIN and a clear photograph of your original part through eBay Messages before ordering.
1. Compare your original part number.
2. Compare the 4-pin electrical plug.
3. Compare housing shape and fixing points.
4. Confirm your heater / air-conditioning control type.
5. If unsure, send us your registration/VIN and a clear photograph of your original part through eBay Messages before ordering.
ACTUAL ITEM PHOTOGRAPHS
Compare the plug, housing, resistor board and fixing arrangement with your original part.
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
PHOTO VERIFICATION:
The photographed component carries Volkswagen Group mould markings and is stock-marked
“IBIZA 2014”. The complete factory reference number is not clearly readable
in these photographs, therefore 6Q0959263A is presented as a cross-reference family and
should be checked against the original component before ordering.
ITEM DETAILS & ENGINEERING INFORMATION
| Component | Heater blower motor / cabin fan resistor |
| Primary Vehicle | SEAT Ibiza |
| Chassis Families | 6L / 6J / late 6J-6P application family where matching resistor is installed |
| Advertised Application Window | 2002–2017 — HVAC specification must still match |
| Visible Stock Marking | IBIZA 2014 |
| Cross-reference Part Number | 6Q0959263A / 6Q0 959 263 A |
| Interchange Reference | 6Q0959263 / 6Q0 959 263 family — verify before use as interchange |
| Superseded Part Number | No additional supersession positively verified from the photographed component |
| Connector | 4-pin resistor family — visually compare connector keying |
| Colour / Marking | Black moulded housing with green resistor board; stock identification marking visible |
| Visible Construction | Moulded polymer housing, electrical resistor board, metal terminals and thermal protection components |
| Location | HVAC / heater blower housing behind the lower dashboard / glovebox-area trim; access varies by RHD/LHD and model |
| Function | Regulates electrical current to provide the selected cabin blower fan speeds |
| Condition | Pre-owned automotive component — please inspect all actual-item photographs |
| eBay Item Number | 147492038826 |
| VAT | Global Accounting / VAT margin scheme where applicable. VAT is not separately itemised and no separately reclaimable VAT amount is shown. |
SEAT IBIZA FITMENT GUIDE
The year range identifies the vehicle family. The resistor still has to match your vehicle's fitted HVAC system.
| Vehicle | Chassis / Body | Years | Fitment Requirement |
|---|---|---|---|
| SEAT Ibiza | 6L • 3-door hatchback | 2002–2009 | Match 4-pin resistor, connector, housing and HVAC configuration |
| SEAT Ibiza | 6L • 5-door hatchback | 2002–2009 | Match 4-pin resistor, connector, housing and HVAC configuration |
| SEAT Ibiza | 6J / facelift family • SC 3-door | 2008–2017 generation | Only where this 4-pin resistor type is installed |
| SEAT Ibiza | 6J / facelift family • 5-door hatchback | 2008–2017 generation | Only where this 4-pin resistor type is installed |
| SEAT Ibiza | 6J family • ST estate | Within 2008–2017 family | CHECK original part number and HVAC specification before purchasing |
IMPORTANT: Door count is not the primary compatibility factor for this electrical HVAC component.
A 3-door, 5-door or estate vehicle can use the same resistor if its blower system specification is identical.
Always prioritise the original component number, plug and HVAC arrangement over body style alone.
VEHICLE REFERENCE
The photographed resistor is stock-marked Ibiza 2014. Donor door-count is not visible on the component, so both body styles are shown for identification rather than pretending a donor body style is known.
2014 SEAT Ibiza 6J Facelift • 5-Door Reference
SEAT Ibiza 6J SC • 3-Door Reference
Reference photographs are for model/body-style recognition only and are not photographs of the donor vehicle.
WHERE IS THE BLOWER RESISTOR FITTED?
TYPICAL LOCATION:
The resistor inserts into the heater / ventilation blower housing in the lower-dashboard / glovebox area. It is positioned in the HVAC airflow so air passing through the heater unit helps control component temperature. Dashboard and trim access differs between left-hand-drive and right-hand-drive cars, so use this photograph as an interior-location reference rather than an exact dismantling diagram.
The resistor inserts into the heater / ventilation blower housing in the lower-dashboard / glovebox area. It is positioned in the HVAC airflow so air passing through the heater unit helps control component temperature. Dashboard and trim access differs between left-hand-drive and right-hand-drive cars, so use this photograph as an interior-location reference rather than an exact dismantling diagram.
WHAT DOES THIS PART CONTROL?
The heater blower resistor regulates the electrical current supplied to the cabin blower motor.
Different resistor paths allow the dashboard fan-speed selector to provide different ventilation speeds.
It is therefore directly involved in the operation of the vehicle's heating, demisting, ventilation and
air-conditioning airflow system.
WHY THE CORRECT TYPE MATTERS:
SEAT vehicles within the same year may use different HVAC control systems. A physically similar component can still be electrically incorrect, which is why matching the original resistor reference, pin layout and heater control specification is essential.
SEAT vehicles within the same year may use different HVAC control systems. A physically similar component can still be electrically incorrect, which is why matching the original resistor reference, pin layout and heater control specification is essential.
COMMON SYMPTOMS OF A FAULTY BLOWER RESISTOR
⚠️ Cabin fan operates only on its highest speed.
⚠️ One or more lower fan-speed settings stop working.
⚠️ Fan speed becomes intermittent or inconsistent.
⚠️ Heater fan appears completely inoperative on some settings.
⚠️ Overheating / hot electrical smell from the resistor or connector area.
DIAGNOSTIC NOTE:
These symptoms are not proof that the resistor is the only fault.
A blower motor, fan switch/control unit, fuse, wiring problem, overheated connector or restricted blower
can cause similar symptoms. If the connector is burnt or melted, inspect and rectify the underlying electrical
problem before fitting another resistor.
VOLKSWAGEN GROUP CROSS-REFERENCE GUIDE
These applications relate to the 6Q0959263A component family. Match the original number and connector before ordering.
| Vehicle Family | Years / Generation | Evidence / Ordering Status |
|---|---|---|
| SEAT Ibiza IV / SC family | 2008–2017 generation | Manufacturer catalogue cross-reference; verify original number/HVAC |
| Škoda Fabia I (6Y) | 1999–2007 generation | 6Q0959263A listed by resistor manufacturer; verify original component |
| Škoda Fabia II (5J) | 2007–2014 generation | 6Q0959263A listed by resistor manufacturer; verify original component |
| Volkswagen Polo | Multiple model years / HVAC variants | 6Q0959263A manufacturer cross-reference — exact year/variant must be confirmed from old part or VIN |
We deliberately do not advertise every Audi / Škoda / Volkswagen model sometimes associated
with this resistor family as confirmed fitment. If a vehicle is not positively supported by the available
manufacturer information, matching the original component number is required before ordering.
❌ DO NOT ORDER THIS PART IF...
Your original resistor has a different electrical connector or number of terminals.
Your original housing / fixing arrangement differs from the photographs.
Your vehicle uses an electronic final-stage blower controller rather than this resistor type.
Your original part number is incompatible with the 6Q0959263A family.
You are matching only from registration year without comparing the actual component.
Your vehicle is a later Ibiza generation unless the original reference and connector positively match.
WHY CHOOSE AN ORIGINAL FACTORY-FIT COMPONENT?
When the reference is correctly matched, an original factory-fit component retains the housing geometry,
electrical connector configuration and mounting arrangement engineered for the vehicle.
This can remove some of the uncertainty associated with very low-cost, unverified pattern alternatives.
CORRECT GEOMETRY
Original mounting and connector architecture when properly matched. VALUE
Pre-owned parts can provide substantial savings compared with buying the equivalent part new. LESS WASTE
Reusing a serviceable automotive component keeps useful material in circulation.
Original mounting and connector architecture when properly matched. VALUE
Pre-owned parts can provide substantial savings compared with buying the equivalent part new. LESS WASTE
Reusing a serviceable automotive component keeps useful material in circulation.
VALUE POTENTIAL:
On selected automotive parts, choosing a pre-owned factory-fit component can offer savings of up to
around 70% compared with current new-part pricing. Actual savings vary by component, availability
and current retail pricing.
BASIC FITTING GUIDE
1. Switch off the ignition, remove the key and allow the electrical system / resistor to cool.
2. Disconnect the battery negative terminal where appropriate, observing vehicle security/radio requirements.
3. Remove the lower passenger-side dashboard / glovebox trim necessary to access the HVAC blower housing.
4. Locate the blower resistor by following the heater blower housing and electrical loom.
5. Release the electrical connector carefully. Do not pull directly on the wiring.
6. Release the retaining screw, clip or locking mechanism fitted to your particular HVAC housing.
7. Remove the old resistor and inspect the electrical connector for heat damage, corrosion or melted terminals.
8. Check that the blower motor rotates correctly and that excessive restriction/debris is not present.
9. Install the replacement resistor fully into the HVAC airflow path and secure it correctly.
10. Reconnect the plug, refit trim and test every blower speed before completing the repair.
This is a general fitting guide rather than a vehicle-manufacturer workshop procedure.
Fasteners and access arrangements can differ. If you are not confident working on vehicle electrical
systems, installation by a competent technician is recommended.
TOOLS & ESTIMATED REPAIR TIME
| Suggested Tools | Torx T20/T25 set, trim-removal tool, small screwdriver, socket/ratchet set, inspection light |
| Optional Diagnostic Tool | Digital multimeter for electrical checks |
| DIY Planning Time | Approximately 30–60 minutes depending on trim access and experience |
| Workshop Planning Time | Approximately 0.5–1.0 labour hour, excluding diagnosis or wiring repair |
ESTIMATED GARAGE LABOUR COST
Static calculator: hourly labour rate × estimated repair time. No JavaScript is used.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50 / hour | £25.00 | £37.50 | £50.00 |
| £70 / hour | £35.00 | £52.50 | £70.00 |
| £90 / hour | £45.00 | £67.50 | £90.00 |
| £120 / hour | £60.00 | £90.00 | £120.00 |
| £150 / hour | £75.00 | £112.50 | £150.00 |
Labour-only planning examples. Diagnostic charges, minimum workshop charges, VAT and additional wiring/trim repairs can alter the final price.
🔧 FITTING SERVICE AVAILABLE
ThePartPilot can offer fitting and repair assistance on selected parts
subject to workshop availability, vehicle condition and location.
Please contact us through eBay Messages before travelling or arranging fitting.
Representative workshop image for illustration — not a photograph of ThePartPilot premises.
25,000+ AUTOMOTIVE PARTS IN STOCK
We hold more than 25,000 automotive parts in stock and on the shelf at any one time,
helping us supply a wide range of replacement components for vehicles across the UK and beyond.
Representative automotive-parts stock image — not a photograph of ThePartPilot premises.
📦 DELIVERY INFORMATION
UK DELIVERY:
Delivery services, price and estimated dates are shown in the eBay postage section for this listing.
INTERNATIONAL DELIVERY:
International shipping is available through eBay's international shipping programme where the item
and destination are eligible. eBay displays the available countries, delivery price, import charges
and estimated delivery information to each buyer at checkout.
CHECK YOUR ADDRESS BEFORE PAYMENT:
Please ensure the delivery address supplied at eBay checkout is complete and correct. Orders must be dispatched using the address provided through the eBay transaction and we cannot manually substitute a different delivery address after checkout.
Please ensure the delivery address supplied at eBay checkout is complete and correct. Orders must be dispatched using the address provided through the eBay transaction and we cannot manually substitute a different delivery address after checkout.
RETURNS & FITMENT RESPONSIBILITY
Our goal is to prevent incorrect orders before they happen.
Please use the compatibility tables, photographs and matching checklist above before installation.
If you are unsure, ask us to help verify the part through eBay Messages.
Returns are handled in accordance with the return terms shown on the eBay listing and applicable buyer rights. No separate restocking fee is charged. Where eBay permits a seller deduction because a returned component has suffered an actual loss in value through installation, alteration, damage, missing components or handling beyond what is reasonably necessary to inspect it, any such adjustment will be handled through the eBay returns process.
Returns are handled in accordance with the return terms shown on the eBay listing and applicable buyer rights. No separate restocking fee is charged. Where eBay permits a seller deduction because a returned component has suffered an actual loss in value through installation, alteration, damage, missing components or handling beyond what is reasonably necessary to inspect it, any such adjustment will be handled through the eBay returns process.
VAT INFORMATION
Where applicable, qualifying stock is sold under the
Global Accounting / VAT Margin Scheme.
VAT is not separately itemised and a separately reclaimable VAT amount is not shown.
🚗 ♻️ SUPPORT A LOCAL AUTOMOTIVE BUSINESS ♻️ 🚗
Buying a serviceable pre-owned automotive component helps support a UK business while keeping
useful parts in circulation. Reusing an existing component can reduce demand for additional
manufacturing, packaging and premature disposal of usable automotive materials.
Every correct-fit recycled part represents another component being put back to useful work rather than unnecessarily becoming waste.
Thank you for supporting ThePartPilot. 💙
Every correct-fit recycled part represents another component being put back to useful work rather than unnecessarily becoming waste.
Thank you for supporting ThePartPilot. 💙
📦 STOCKED • PICKED • PACKED • DISPATCHED
Representative warehouse / boxed-stock image — not a photograph of ThePartPilot premises.
FINAL CHECK BEFORE YOU CLICK BUY
✅ Correct SEAT Ibiza generation / application window?
✅ Original part number matches the 6Q0959263A family where applicable?
✅ Same 4-pin plug and connector keying?
✅ Same black housing / green resistor-board layout?
✅ Same mounting arrangement?
✅ Correct heater / blower control system?
✅ Delivery address at checkout is correct?
If any answer is uncertain, message ThePartPilot through eBay before ordering. We would rather verify the component first than have you lose time fitting the wrong part.
✅ Original part number matches the 6Q0959263A family where applicable?
✅ Same 4-pin plug and connector keying?
✅ Same black housing / green resistor-board layout?
✅ Same mounting arrangement?
✅ Correct heater / blower control system?
✅ Delivery address at checkout is correct?
If any answer is uncertain, message ThePartPilot through eBay before ordering. We would rather verify the component first than have you lose time fitting the wrong part.
THEPARTPILOT
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
SEAT and associated vehicle marques are the property of their respective owners.
Marks are displayed only to identify the vehicle application; no manufacturer endorsement is implied.
Vehicle reference imagery: Wikimedia Commons —
Rudolf Stricker / CC BY-SA 2.0 DE;
SEAT Ibiza SC image / Creative Commons;
interior image by Hugo Cadavez / Creative Commons.
Representative automotive-parts and warehouse images: Wikimedia Commons / applicable Creative Commons licences.
© ThePartPilot • Listing content and layout prepared for ThePartPilot brand presentation.