SKODA FABIA MK3 NJ 2014-2021 5DR REAR SCREEN WIPER ARM BLADE 5G9955707

SKODA FABIA MK3 NJ 2014-2021 5DR REAR SCREEN WIPER ARM BLADE 5G9955707

£22.54
Skip to product information
SKODA FABIA MK3 NJ 2014-2021 5DR REAR SCREEN WIPER ARM BLADE 5G9955707

SKODA FABIA MK3 NJ 2014-2021 5DR REAR SCREEN WIPER ARM BLADE 5G9955707

£22.54
THE PART PILOT
FACTORY-FIT RECYCLED VEHICLE PARTS
25,000+ PARTS IN STOCK • 30-DAY WARRANTY • FITTING MAY BE AVAILABLE
✓ Photo-checked ✓ 5-door hatchback ✓ Rear arm + blade ✓ Worldwide options via eBay
ŠKODA FABIA III / MK3 • TYPE NJ / NJ3 • 5-DOOR HATCHBACK

Rear Screen Wiper Arm + Blade Assembly

Rear tailgate wiper arm supplied with the pictured blade. Designed to transfer movement from the rear wiper motor spindle to the blade so the rear glass can be cleared of rain, spray and road dirt.

ACTUAL ITEM PHOTOS

The photos below are from this listing. Please compare the arm shape, spindle mounting end, blade attachment and cosmetic condition with your existing part.
Actual Skoda Fabia rear wiper arm and blade supplied
THEPARTPILOT
Actual rear wiper arm marked Fabia 2018
THEPARTPILOT
Actual close view of Fabia 2018 rear wiper arm and blade
THEPARTPILOT

ITEM DETAILS & SPECIFICS

eBay Item Number 147479020748
Vehicle Make Škoda
Vehicle Model Fabia III / Fabia Mk3
Chassis / Type NJ / NJ3
Production Fitment 2014-2021 Fabia III 5-door hatchback. UK-market registrations are commonly 2015-2021. Match by part shape, number and VIN before ordering.
Donor Identification Marked in the listing photos as Fabia 2018 rear wiper.
Body Style 5-door hatchback only
Placement Rear tailgate / rear window
Part Type Rear screen wiper arm with blade
Colour / Finish Black
Material Reinforced moulded arm construction with metal spindle interface and rubber wiping element.
Condition Pre-owned recycled factory-fit component. Expect normal storage/cosmetic marks. Review all actual-item photos.
Included Wiper arm and pictured rear blade. Only items shown in the listing photos are included.
Warranty 30 days, subject to the listing terms.
VAT Global Accounting VAT Margin Scheme. VAT is not shown separately and is not reclaimable.

ENGINEERING / CATALOGUE REFERENCES

Rear arm reference: 5G9 955 707 / 5G9955707 / 5G9955707 03C
Rear blade reference for Fabia III hatchback: 6V6 955 425 / 6V6955425
The moulded number is not clearly readable in the supplied listing photos. These are catalogue cross-references for the pictured Fabia III hatchback application, not a substitute for checking the number on your original part or confirming by VIN.

PARTS COMPATIBILITY TABLE

Make Model Years Body Status / Notes
Škoda Fabia III / Mk3 NJ / NJ3 2014-2021 5-door hatchback Confirmed application for this listing, subject to shape/number/VIN check.
Volkswagen / Škoda Other models using arm reference 5G9955707 Varies Varies Reference only. The arm number appears in other VAG applications, but blade length, park angle and body geometry can differ. This complete arm-and-blade set is sold as Fabia III hatchback fitment only unless we confirm otherwise through eBay Messages.
DO NOT ORDER FOR: Fabia Mk1 6Y, Fabia Mk2 5J, Fabia Mk4 PJ, Fabia III Estate/Combi, 3-door models, saloon models, front windscreen wipers, rear wiper motors, or any vehicle where your original arm/part number and mounting shape do not match.

CORRECT VEHICLE & FITTING LOCATION

The part fits at the centre-lower area of the rear window on the tailgate and attaches to the rear wiper motor spindle. The images below show a 2018 Fabia III 5-door hatchback and the rear wiper location. These are reference vehicle images, not the donor vehicle.

2018 Skoda Fabia III five door hatchback rear view showing rear wiper location
2018 Skoda Fabia III five door hatchback rear reference image
Reference photos: Vauxford / Wikimedia Commons / CC BY-SA 4.0.

WHAT THIS PART DOES

The arm clamps onto the splined rear wiper spindle. When the motor turns, the arm carries the blade across the glass. Correct arm geometry keeps the blade at the intended sweep angle and pressure, helping maintain rear visibility in rain and road spray.

FAULT SYMPTOMS

Loose or cracked arm, excessive play at the spindle, poor contact with the glass, smearing, skipping, chatter, incorrect park position, blade lifting at speed, or a motor that can be heard operating while the arm does not sweep correctly.

DIAGNOSIS NOTE: A failed motor, seized spindle, damaged wiring, blown fuse, washer fault or damaged tailgate loom will not be repaired by replacing the arm alone. Check the complete rear wiper system before ordering.

WHY CHOOSE A FACTORY-FIT RECYCLED PART?

A factory-fit donor component is made around the vehicle’s original spindle, sweep angle and tailgate geometry. Compared with low-cost pattern copies, it can provide a better match for arm profile, blade pressure, mounting taper and parked position when the correct reference is selected.

Buying a quality recycled part can also cost substantially less than buying new while keeping a serviceable component in use. Actual savings vary by part and current retail pricing.

FITTING GUIDE

Required tools
13 mm socket or spanner, ratchet, small trim tool or flat screwdriver, masking tape/marker, cleaning cloth, protective gloves and a small wiper-arm puller if the old arm is seized.
Estimated time
20-40 minutes for a straightforward replacement. Allow longer where the arm is corroded onto the spindle or diagnosis is required.
  1. Park safely, switch the ignition off and confirm the rear wiper is in its normal parked position.
  2. Use masking tape to mark the existing blade position on the glass.
  3. Lift the spindle cap carefully and remove the retaining nut with the correct socket.
  4. Rock the old arm gently while pulling upward. Use a proper wiper-arm puller if seized. Do not lever against the glass.
  5. Clean the spindle splines and inspect the spindle, nut and surrounding glass/seal for damage.
  6. Fit the replacement arm at the same parked angle and refit the retaining nut.
  7. Tighten to the vehicle manufacturer’s workshop specification. Do not overtighten the spindle or load the rear glass.
  8. Refit the cap, wet the glass and test the sweep. Stop immediately if the blade contacts the bodywork or glass edge.
Installation should be completed by a competent person. ThePartPilot may offer fitting subject to availability; please enquire through eBay Messages before purchase.

ESTIMATED GARAGE LABOUR COST

Static estimate based on approximately 0.25-0.50 labour hours. This is not a quotation and excludes diagnosis, seized-part removal, VAT where applicable and additional parts.

Garage Rate 15 Minutes 30 Minutes
£60/hour £15 £30
£80/hour £20 £40
£100/hour £25 £50
£120/hour £30 £60

BUYER MATCHING CHECKLIST — ORDER CORRECTLY FIRST TIME

✓ Confirm your vehicle is a Fabia III / Mk3 NJ or NJ3 5-door hatchback.
✓ Confirm the production year falls within 2014-2021.
✓ Compare your arm shape, spindle end, blade attachment and parked angle with the actual photos.
✓ Match 5G9955707 / 5G9 955 707 where visible on your original arm or parts data.
✓ Match blade reference 6V6955425 where applicable.
✓ Send your registration or 17-digit VIN through eBay Messages if uncertain.
✓ Check your eBay checkout address before payment; the seller cannot change the delivery address after checkout.

RETURNS & FITMENT RESPONSIBILITY

Please complete the matching checklist before ordering. If uncertain, contact us through eBay Messages so we can help check the part against your registration, VIN, original number and photos.

Returns are handled under the return policy shown on the eBay listing, eBay rules and applicable consumer law. Any permitted deduction can only reflect actual diminished value caused by handling, damage, incomplete return or use beyond what is reasonably necessary to inspect the item.

POSTAGE & INTERNATIONAL DELIVERY

UK and international delivery options are shown by eBay at checkout. International orders may be sent through eBay’s Global Shipping Programme where available.

Eligible destinations, postage prices, delivery times, customs charges and import taxes are controlled by eBay and depend on the buyer’s address and the item. Please rely on the checkout information shown for your location.

STOCK, FITTING & DISPATCH

ThePartPilot keeps more than 25,000 vehicle parts in stock. Parts are selected, checked, packed and dispatched from shelf. Fitting and repair support may be available subject to workshop capacity.

Reference image of stocked warehouse shelving
Large stocked warehouse
Reference image of a vehicle repair workshop
Workshop support subject to availability

WhatsApp QR for Fitment Help / Appointment Enquiries 

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.       
      
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.  
Reference image of boxed goods prepared for dispatch
Careful packing and dispatch
Warehouse and workshop reference images: Pexels contributors Tiger Lily and Artem Podrez.

SUPPORT A LOCAL SMALL BUSINESS ♻️🚗📦

Thank you for supporting ThePartPilot. Reusing serviceable vehicle parts helps reduce manufacturing demand, packaging waste and the number of components sent for disposal. Every correctly matched recycled part keeps useful materials in circulation and supports a more resource-efficient approach to vehicle repair.

THE PART PILOT
Please use eBay Messages for fitment checks, fitting availability and order support.
Vehicle reference images are illustrative. Actual supplied item is shown in the listing photographs above.

You may also like