SSANGYONG TIVOLI X100 2015-2019 RHD CENTRE CONSOLE ARMREST STORAGE 77911-35500

THE PART PILOT

THEPARTPILOT

VEHICLE PARTS • FITMENT SUPPORT • FITTING SERVICE SUBJECT TO AVAILABILITY

⚠ CRITICAL FITMENT CHECK

PART NUMBER: 77911-35500

MOULDED IDENTIFICATION: X100 CONSOLE MAIN (RHD)

Do not order using registration year alone. Match the exact part number, RHD marking, console shape, openings and fixing points against your original part.

SSANGYONG TIVOLI X100 2015-2019 RHD
CENTRE CONSOLE • ARMREST • STORAGE

77911-35500

📸 EXACT ITEM PHOTOGRAPHS

These are photographs of the actual part offered for sale. Please inspect every image carefully.

🔎 FITMENT VERIFIED FROM THE PART ITSELF

🚙 VEHICLE & FITTING-LOCATION REFERENCE

Reference images are shown to help identify the X100 generation and understand where the centre console is positioned. They are not photographs of the vehicle this individual part was removed from.

ITEM DETAILS & SPECIFICS

✅ PARTS COMPATIBILITY CHART

Fitment is based primarily on the physical X100 / RHD / 77911-35500 identification. Because interior console specification can vary by production date, transmission and trim, the number and photographs must still be compared before purchase.

Vehicle	Year	Body	Steering	Fitment Status	Required Check
SsangYong Tivoli X100	2015	5-door	RHD	SUPPORTED	77911-35500 + matching console layout
SsangYong Tivoli X100	2016	5-door	RHD	MATCH REQUIRED	Verify exact number, RHD marking, apertures and mounts
SsangYong Tivoli X100	2017	5-door	RHD	MATCH REQUIRED	Verify exact number, RHD marking, apertures and mounts
SsangYong Tivoli X100	2018	5-door	RHD	MATCH REQUIRED	Verify exact number, RHD marking, apertures and mounts
SsangYong Tivoli X100	2019	5-door	RHD	CHANGEOVER YEAR	Exact 77911-35500 and identical shape mandatory
SsangYong Tivoli XLV	2016–2019	5-door extended body	RHD	CONDITIONAL CROSS-FIT	77911-35500 is cross-referenced to XLV; order only after exact number and console-shape match

❌ DO NOT ORDER FOR THESE APPLICATIONS WITHOUT FURTHER VERIFICATION

Left-hand-drive vehicles: this component is physically marked CONSOLE MAIN (RHD).

2019 facelift/changeover cars: do not assume compatibility from registration year alone.

2020-on facelift Tivoli: not claimed as compatible with this listing unless the removed component carries the exact 77911-35500 identification and is visually identical.

Later KGM-branded Tivoli versions: not listed as a confirmed fit.

Korando, Rexton, Musso and other SsangYong/KGM models: no confirmed direct fit has been established for this part number.

Any vehicle with a different centre-console part number, different top openings, different fastening pattern or different steering configuration: do not assume compatibility.

🎯 BUY THE CORRECT PART FIRST TIME

Before ordering, complete all six checks:

1. Your original console should show 77911-35500.

2. Confirm your vehicle is right-hand drive.

3. Compare the gear-selector / top-console openings with our photographs.

4. Compare all mounting tabs, screw positions and side profiles.

5. Check which trim pieces, switches, sockets, cupholder parts or liners must be transferred from your old console.

6. If anything differs, contact us through eBay Messages with a photograph of your original part number and console before ordering.

📍 WHERE THIS PART FITS & WHAT IT DOES

This is the main centre-console structure fitted over the transmission / centre tunnel between the driver's and front passenger's seats.

It provides the structural and cosmetic housing for the centre armrest and storage area, and supports surrounding centre-tunnel trim. Depending on vehicle specification, adjacent trim may interface with the gear-selector surround, cupholder area, accessory sockets or switch panels.

The main console shell itself is primarily a structural/interior-trim component rather than an electronic control module. Any switches, sockets or electrical equipment fitted around it remain vehicle-specification dependent.

🔧 COMMON REASONS THIS PART MAY NEED REPLACEMENT

🧪 MATERIAL & CONSTRUCTION

The actual moulding is marked >PP TD20 EPDM<. This identifies a polypropylene-based automotive moulding incorporating EPDM modification and a TD20 mineral-filled grade. This type of compound is selected for a balance of dimensional stability, toughness and durability in moulded automotive trim.

Material description is based on the physical moulding code visible on the supplied component.

⭐ BENEFITS OF AN ORIGINAL MANUFACTURER COMPONENT

Choosing a previously fitted original manufacturer component can be preferable to a low-cost replica when accurate interior fit and appearance are important.

♻ VALUE BENEFIT: selected previously fitted vehicle parts from our wider range can offer savings of up to 70% compared with the cost of a new replacement. Actual saving varies by component and current new-part pricing.

🛠 FITTING GUIDE

Important: This is a general fitting overview rather than a substitute for model-specific workshop information. Fasteners, trim panels and electrical equipment can vary by specification.

Typical tools required

• Plastic automotive trim-removal tools
• Suitable Phillips / cross-head screwdriver bits
• Torx bit set as required by your vehicle
• Small metric socket and ratchet set
• Extension bar where access is restricted
• Magnetic parts tray for screws and clips
• Inspection torch / work light
• Protective cloths or masking protection for adjacent trim

Typical removal & installation sequence

1 — Prepare the vehicle: park safely on level ground, apply the parking brake, switch the ignition off and remove the key.

2 — Protect surrounding trim: cover vulnerable seat edges and adjacent console/dashboard surfaces. Photograph your existing console before dismantling so every trim piece and connector can be returned to its original position.

3 — Remove upper trim carefully: use plastic trim tools to release the gear-selector surround, cupholder/top-console trim and other removable inserts fitted to your particular specification. Never force a panel if a hidden screw or clip may still be fitted.

4 — Electrical connectors: where accessory sockets or switches are attached, identify and disconnect their plugs only after access is available. If electrical isolation is required, follow appropriate repair data for your vehicle before disconnecting the battery.

5 — Expose console fasteners: move the front seats as necessary and inspect the front, rear and storage-compartment areas for console retaining screws or bolts.

6 — Remove the existing console: once all confirmed fasteners are removed, lift/reposition the assembly carefully. Stop immediately if wiring, a hidden clip or another fixing resists movement.

7 — Transfer required components: compare both consoles side-by-side. Transfer any required clips, liners, inserts, gear-surround pieces or other components that are not included with this listing.

8 — Trial fit: position the replacement without forcing it. Confirm every fixing location and trim opening aligns correctly before fully tightening fasteners.

9 — Reconnect & reassemble: reconnect any disturbed electrical plugs, secure the console and refit the upper trim in reverse order.

10 — Final inspection: ensure the gear selector moves freely, no wiring is trapped, surrounding trim is secure and any disturbed switches or accessory sockets operate correctly.

⏱ ESTIMATED FITTING TIME

Experienced fitter: approximately 0.75–1.5 hours

DIY installation: approximately 1.5–2.5 hours

Estimates only. Actual time depends on trim level, transmission configuration, electrical equipment, previous repairs, clip condition and technician experience.

💷 STATIC GARAGE LABOUR COST ESTIMATOR

eBay descriptions cannot use an interactive JavaScript calculator, so use this simple static table: Hourly labour rate × time = estimated labour cost.

Garage Rate	0.75 Hour	1.0 Hour	1.5 Hours
£40 / hour	£30	£40	£60
£60 / hour	£45	£60	£90
£80 / hour	£60	£80	£120
£100 / hour	£75	£100	£150
£120 / hour	£90	£120	£180

Labour figures are examples only and do not include parts, diagnostics, additional repairs, consumables or other charges that an individual garage may apply.

🔧 FITTING SERVICE AVAILABLE

We can offer a fitting / repair service for selected parts and vehicles, subject to workshop availability.

Please contact us through eBay Messages to check availability before making travel arrangements.

🌍 INTERNATIONAL DELIVERY THROUGH EBAY

Eligible international orders may be delivered through eBay's Global Shipping Programme and/or eBay International Shipping where offered at checkout. Destination availability, import charges, restrictions and delivery pricing are controlled by eBay and can vary by item and destination.

Current GSP eligible EU destinations

Austria • Belgium • Bulgaria • Croatia • Cyprus • Czech Republic • Denmark • Estonia • Finland • France • Germany • Greece • Hungary • Ireland • Italy • Latvia • Lithuania • Luxembourg • Malta • Netherlands • Poland • Portugal • Romania • Slovakia • Slovenia • Spain • Sweden

Current GSP eligible non-EU destinations

Antigua and Barbuda • Aruba • Australia • Bahamas • Bahrain • Bangladesh • Barbados • Belize • Bermuda • Bolivia • Brazil • Brunei Darussalam • Cambodia • Canada • Cayman Islands • Chile • China • Colombia • Costa Rica • Dominica • Dominican Republic • Ecuador • Egypt • El Salvador • French Guiana • Grenada • Guadeloupe • Guatemala • Guernsey • Honduras • Hong Kong • Iceland • Indonesia • Israel • Jamaica • Japan • Jersey • Jordan • Kuwait • Liechtenstein • Macau • Malaysia • Maldives • Martinique • Mexico • Monaco • Montserrat • New Zealand • Nicaragua • Norway • Oman • Pakistan • Panama • Paraguay • Peru • Philippines • Qatar • Reunion • Saint Kitts and Nevis • Saint Lucia • Saudi Arabia • Singapore • South Africa • South Korea • Sri Lanka • Switzerland • Taiwan • Thailand • Trinidad and Tobago • Turks & Caicos Island • UAE • Ukraine • Uruguay • USA • Vietnam

International programme coverage changes over time. The delivery destinations and charges displayed by eBay at checkout take priority over this information.

📦 CHECK YOUR DELIVERY ADDRESS BEFORE PAYMENT

Please make sure the delivery address shown during eBay checkout is complete and correct before placing the order. For transaction security, we cannot simply redirect an order to a different address after checkout.

↩ RETURNS & FITMENT RESPONSIBILITY

This listing provides unusually detailed fitment information because our goal is to help customers identify the correct component before ordering and reduce unnecessary returns.

Please compare the 77911-35500 number, RHD moulding, photographs, fixing points and console openings before purchase.

Returns are handled in accordance with the return settings shown on this eBay listing, applicable eBay rules and your statutory rights.

Where an item is returned materially altered, damaged, incomplete or in a different condition from the condition in which it was dispatched, any permitted deduction will only be considered where eBay policy and applicable law allow it.

VAT INFORMATION

Eligible second-hand stock is sold under the VAT Global Accounting / margin-scheme rules where applicable. VAT is not separately itemised, and no separately reclaimable VAT amount is available on qualifying Global Accounting sales.

🏭 MORE THAN 25,000 PARTS IN STOCK

Our operation holds more than 25,000 vehicle parts on the shelf at any one time, covering a wide range of makes, models and component categories.

💚 SUPPORTING A LOCAL SMALL BUSINESS

Thank you for supporting ThePartPilot. Every order supports a growing independent vehicle-parts business and helps us continue identifying, stocking and supplying useful components that may otherwise go to waste.

♻️ Reusing a serviceable vehicle part can extend the useful life of an existing component, reduce demand for unnecessary replacement manufacturing and keep usable material in circulation for longer.

🚗 ➜ 🔧 ➜ 📦 ➜ 🚙
Recover • Inspect • Reuse • Keep Vehicles Moving

📦 FROM OUR SHELF TO YOUR VEHICLE

Parts are selected from warehouse stock, checked against the listing, prepared for transport and dispatched to the delivery address supplied through eBay checkout.

🏭   🔍   📦   🚚   🚙

UNSURE? CHECK BEFORE YOU BUY

Send us a clear photograph of your original centre console and its manufacturer part number through eBay Messages.

The best match is:
77911-35500 • X100 CONSOLE MAIN (RHD) • IDENTICAL SHAPE & FIXING POINTS

THEPARTPILOT

PARTS • KNOWLEDGE • FITMENT

THEPARTPILOT BRANDING • LISTING REFERENCE 147493783030