Suzuki Grand Vitara Rear Right Bumper Retainer Support Holder Bracket RH
Suzuki Grand Vitara Rear Right Bumper Retainer Support Holder Bracket RH
Suzuki Grand Vitara Rear Right Bumper Retainer / Support Holder
The existing listing photographs do not show a readable moulded Suzuki part reference or donor VIN. For that reason we will not invent a year range or guarantee compatibility from model name alone.
Please verify by VIN before ordering. We can cross-check the VIN against the Suzuki parts catalogue. Buyers should also compare the shape, mounting holes, tabs, clips and overall profile shown in the actual-item photographs below with the part being replaced.
| Part Detail | Information |
|---|---|
| Brand | Suzuki |
| Part Type | Rear bumper retainer / support holder / locating bracket |
| Position | Rear right-hand side (RH) |
| Material | Moulded black polymer / plastic. Exact resin grade is not readable from the available photographs. |
| Condition | Used original Suzuki donor component. Please inspect all photographs for cosmetic condition, clips, mounting points and storage marks. |
| ThePartPilot Stock Reference | 238511 |
| Manufacturer Reference | Not readable in the current listing photographs. VIN verification required before an exact reference is advertised. |
Actual Item Photographs
These are photographs of the actual used component offered for sale. They are hosted on eBay's own secure image servers for maximum listing reliability.
Where Is This Part Fitted?
RH means the vehicle's right-hand side when sitting in the vehicle and facing forwards. This avoids confusion between driver/passenger terminology in right-hand-drive and left-hand-drive markets.
What does it do?
This component mechanically supports, locates and retains the rear bumper cover. Its moulded guides and fixing points help keep the bumper corner correctly aligned with the surrounding bodywork. It does not electronically control any vehicle system.
Compatibility & Fitment Control
| Vehicle / Generation | Status | What You Must Check |
|---|---|---|
| Suzuki Grand Vitara | VIN verification required | Existing photographs strongly indicate a Grand Vitara application, but the exact year/body-style range is not certified without the donor VIN or readable Suzuki reference. |
| Suzuki Escudo | Do not order by model name alone | Some related Suzuki catalogue references cross into Escudo markets. Exact VIN/reference confirmation is required. |
| Earlier Grand Vitara generation | Do not assume fit | Earlier vehicles use different rear bumper bracket designs. Year alone is not sufficient evidence. |
| 3-door versions | Do not assume fit | Bumper mounting components can differ from 5-door versions. VIN and exact bracket design must be checked. |
| 5-door versions | Not yet certified | Strong catalogue lead exists, but body style will only be advertised as confirmed after VIN/reference verification. |
For the lowest risk of a wrong order, provide the full VIN through eBay Messages. We will verify the catalogue application before confirming fitment.
Common Symptoms of a Damaged Bumper Retainer
- Rear bumper corner sits proud of the body instead of clipping flush.
- Uneven panel gap between bumper cover and rear quarter area.
- Bumper corner drops, sags or moves when lightly pressed.
- Rattling or vibration from the bumper area while driving.
- Bumper repeatedly pops away after being pushed back into position.
- Broken locating tabs or fixing points after minor impact damage.
- Damage discovered during previous bumper removal or body repair.
A factory-fit donor component retains the mounting geometry, moulding profile, clip positions and body-interface design originally developed for the vehicle. Low-cost replacement copies can vary in moulding tolerances, material feel and fixing alignment. A correctly matched used original component can therefore be an economical way to restore proper bumper location without unnecessary waste.
Buying quality used vehicle parts can also produce substantial savings compared with purchasing the equivalent component new. On some parts, savings of up to 70% may be possible; the actual saving naturally varies by component, availability and current new-part pricing.
General Fitting Guide
Typical Tools
- Plastic trim-removal tools
- Metric socket and ratchet set
- Suitable screwdrivers
- Small extension bar
- Pliers where required for trim clips
- Workshop light / inspection lamp
- Protective tape for adjacent painted panels
- Replacement bumper clips if existing clips are damaged
Typical Procedure
- Confirm VIN, side and physical bracket shape before dismantling the vehicle.
- Park safely on level ground, apply the parking brake and switch the ignition off.
- Protect adjacent painted edges before removing trim or the bumper cover.
- Remove the applicable wheel-arch, underside and rear bumper fixings.
- Support the bumper cover while releasing its side locating points.
- If the vehicle has sensors, lights or other wiring in the bumper, disconnect them carefully before moving the cover away.
- Remove the damaged RH bumper holder/retainer.
- Place the removed and replacement parts side-by-side and compare every hole, tab, clip, bend and mounting point.
- Install the replacement without forcing it into position.
- Reinstall the bumper cover and associated fasteners using the correct manufacturer tightening information where specified.
- Check that the bumper sits flush and has an even panel gap.
- Reconnect and test any electrical equipment that was disconnected during bumper removal.
Estimated Workshop Time
Planning allowance: approximately 0.5 to 1.5 labour hours for a competent workshop where fasteners release normally. Corrosion, previous accident damage, damaged clips, tow-bar equipment, parking sensors or other modifications may increase the time required.
ThePartPilot fitting / repair service may be available subject to workshop capacity.
Garage Labour Cost Estimator
No script or active content is used. Select your garage's hourly labour rate and compare it with the likely repair time.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour | 1.5 Hours |
|---|---|---|---|---|
| £60/hr | £30 | £45 | £60 | £90 |
| £80/hr | £40 | £60 | £80 | £120 |
| £100/hr | £50 | £75 | £100 | £150 |
| £120/hr | £60 | £90 | £120 | £180 |
| £150/hr | £75 | £112.50 | £150 | £225 |
Labour figures are estimates only and exclude the part, additional clips, diagnostics, body repair, seized fasteners and any other work discovered after dismantling.
Ordering Correctly First Time
- Check the full VIN.
- Compare the replacement part with your existing component.
- Compare every mounting hole, tab, guide and fixing point.
- Do not rely solely on registration year or vehicle appearance.
- If uncertain, request a fitment check through eBay Messages before purchase.
Please make certain the delivery address shown at eBay checkout is completely correct before completing payment. We cannot simply redirect an order to a different address after checkout.
Returns & Part Condition
Returns are handled under the return terms displayed on this eBay listing and applicable eBay policy. Please carry out all fitment checks before installation.
A part being returned should be kept in the same condition in which it was supplied. Where eBay policy permits a seller deduction because an item has lost value through installation, use, alteration, damage, missing components or inadequate return packaging, an appropriate deduction may be applied in accordance with eBay's return process.
This is why we provide detailed photographs and offer VIN-based fitment checking before purchase: our aim is to get the correct component to you first time.
Collection, Fitting & Dispatch
| Collection | Collection available 7 days a week until 8pm by prior appointment, including bank holidays by prior appointment. |
| Fitting / Repairs | Workshop fitting and vehicle repair service available subject to appointment and workshop capacity. |
| Stock | ThePartPilot holds more than 25,000 vehicle parts in stock and on the shelf at any one time. |
| International Orders | International delivery may be available where eBay checkout offers it for this item and destination. Available destinations, postage charges, customs charges and import taxes are determined at checkout. |
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
VAT Information
Used Parts: Better Value, Less Waste
Choosing a correctly matched used original vehicle component can keep a serviceable part in use, reduce demand for newly manufactured replacement components and help reduce unnecessary material and packaging waste.
By purchasing from ThePartPilot you are also supporting an independent UK vehicle parts business focused on recovering, checking, storing and supplying reusable components rather than sending serviceable automotive parts unnecessarily into the waste stream.
Thank you for supporting reuse, responsible vehicle repair and local small business.