SUZUKI SX4 S-CROSS JY 2013-2016 PRE-CHANGE Rear Centre Belt Tongue 84985-61M00

THEPARTPILOT

SUZUKI SX4 S-CROSS JY

Rear Centre Seat Belt Tongue / Stalk

84985-61M00

5-door S-Cross • rear middle seating position • fitment-first listing

⚠️ FITMENT CRITICAL — PLEASE READ BEFORE ORDERING

This exact part number is an early-production rear-centre tongue assembly. Catalogue data shows a production change during 2016 to a later 84985-61M01 reference on some vehicles. Registration year alone is therefore not enough around the changeover.

Best match method: compare the number 84985-61M00 on your existing part, compare the shape and mounting from the photos, then ask us through eBay Messages to verify by VIN if you are unsure.

The photographed label/marking shows 84985-61M00 / 8498561M00. The pictured item is also hand-marked S-CROSS 2016. This listing has therefore been written from the physical photo evidence first, then checked against catalogue fitment data.

🚗 CORRECT VEHICLE & FITTING-AREA REFERENCES

eBay Item Number	147492038839
Manufacturer	Suzuki
Vehicle	SX4 S-Cross, JY generation, 5-door crossover
Part Type	Rear-centre seat-belt tongue / stalk / anchorage assembly
Placement	Rear • centre / middle seating position
Part Number	84985-61M00 / 8498561M00
Catalogue Colour Variant	84985-61M00-5PK — black
Later Production Reference	84985-61M01-5PK appears after a 2016 production/VIN change; do not assume direct interchange
Interchange Part Number	No universal cross-model interchange confirmed
Superseded Part Number	No direct supersession confirmed; M01 is treated here as a later VIN-specific production reference
Colour / Finish	Black webbing and dark protective components; hand-written donor/stock marking visible
Visible Construction	Woven restraint webbing, metal tongue/anchorage components and moulded polymer protection; exact material grades are not marked on the item
Included	1 × rear-centre tongue/stalk assembly as pictured. No extra buckle, trim or hardware unless visible in the listing photos
Condition	Recycled / pre-owned factory-fit component. Please use the detailed photographs to judge cosmetic condition and markings
Warranty	30 days, subject to the listing terms and eBay protections

The table below deliberately uses a conservative early-production range rather than a broad year span. This is intended to reduce wrong orders.

Vehicle	Years	Status	What to check
Suzuki SX4 S-Cross JY 5DR • 1.6 petrol M16A	2013–2015	✅ CATALOGUE-SUPPORTED EARLY FITMENT	Match 84985-61M00 and the photographed mounting/tongue shape
Suzuki SX4 S-Cross JY 5DR • 1.6 diesel D16AA	2013–2015	✅ CATALOGUE-SUPPORTED EARLY FITMENT	Match 84985-61M00 and the photographed mounting/tongue shape
Suzuki SX4 S-Cross JY 5DR • early-production vehicles	2016	⚠️ PRODUCTION-CHANGE YEAR	The pictured part is donor-marked 2016, but M01 appears after a 2016 VIN change. Buy only when your existing number is M00 or we confirm the VIN through eBay Messages
Suzuki SX4 S-Cross JY • later production / facelift	2016–2021	❌ NOT A BLANKET FIT	Later catalogue data uses M01 after the production change. Do not order by model/year alone
New-generation S-Cross / later-market vehicles	2022 onward	❌ NOT CONFIRMED HERE	Do not assume cross-generation fitment from marketplace/recycler references; VIN and physical-number verification required

• Suzuki SX4 first generation (the earlier SX4 model, not S-Cross JY).
• Front seat-belt components.
• Rear outer left/right tongue assemblies — these are separate parts.
• Rear-centre buckle assembly — catalogue references for the buckle are separate from 84985-61M00.
• Any vehicle whose removed component carries a different part number unless interchange has been positively verified.

This component belongs at the rear-centre / middle seating position. It forms part of the mechanical restraint connection and helps provide the correct belt anchorage/engagement geometry for the centre passenger. It is not being sold here as an electronic module and no electronic control function is claimed.

Safety note: restraint components are safety-critical. Do not fit a component with crash loading, torn/frayed webbing, distortion, heavy corrosion, damaged latch surfaces or uncertain structural condition. If the vehicle has been involved in a collision, the complete relevant restraint system should be professionally inspected.

• Tongue will not insert fully into the correct mating buckle/connector.
• Poor or inconsistent positive engagement after the mating buckle has also been checked.
• Visible fraying, cuts, pulled threads, heat damage or contamination to the restraint webbing.
• Bent, worn, cracked or heavily corroded metal tongue/anchorage components.
• Damaged protective sleeve/housing or incorrect belt routing.
• Component has experienced collision loading or its history cannot be safely established.

A correctly matched factory-produced component retains the vehicle maker's intended mounting geometry, shape and interface. That matters on a restraint part where fit and engagement must be correct. A low-cost unverified aftermarket substitute may differ in geometry, materials, finish or tolerances.

Value: selected recycled factory parts can be priced as much as 70% below a current new-equivalent price, depending on the component, availability and market price. Always compare like-for-like part numbers and current pricing.

Important: origin alone does not make a safety component serviceable. Condition and correct fitment still matter, so use the photos, part number and professional inspection.

• Protective seat/trim covers and inspection lamp
• Trim-removal tools as required
• Correct-size socket and ratchet for the factory anchorage fastener
• Calibrated torque wrench
• Vehicle-specific workshop data for the anchorage tightening specification

1. Park safely, remove the key and protect the interior. Follow Suzuki workshop precautions for restraint-system work.
2. Move/fold/remove the rear bench or trim only as required to access the centre-belt anchorage.
3. Before removal, compare the existing part number, tongue shape, webbing length/orientation and mounting point with the replacement.
4. Remove the factory anchorage fastener using the correct tool. Inspect the fastener and surrounding body anchorage for damage or corrosion.
5. Install the replacement in the same orientation with the webbing flat and untwisted.
6. Tighten the restraint anchorage to the manufacturer workshop specification using a calibrated torque wrench. No unverified torque figure is supplied in this listing.
7. Refit trim/seat components and perform a careful latch, release, pull and routing inspection before the seat is occupied.

Fitting service: we may be able to provide fitting subject to workshop availability. Please contact us through eBay Messages before purchase/travel to confirm availability.

Labour-only examples based on the estimated 0.5–1.0 hour job time. Actual workshop charges vary by location, access, diagnosis and additional work.

Garage rate	0.5 hr	0.75 hr	1.0 hr
£50/hr	£25.00	£37.50	£50.00
£60/hr	£30.00	£45.00	£60.00
£70/hr	£35.00	£52.50	£70.00
£80/hr	£40.00	£60.00	£80.00
£90/hr	£45.00	£67.50	£90.00
£100/hr	£50.00	£75.00	£100.00
£120/hr	£60.00	£90.00	£120.00
£150/hr	£75.00	£112.50	£150.00

We hold more than 25,000 parts in stock/on the shelf at any one time. Our fitment-first approach is designed to help buyers compare part numbers, vehicle details and photographs before ordering.

Need a fitment check? Send your VIN, registration, current part number and a clear photo of your existing component through eBay Messages. For changeover-year vehicles, VIN and physical-part comparison are more reliable than registration year alone.

Fitting and repair work may be available subject to workshop capacity and the vehicle/part involved. Availability must be confirmed in advance through eBay Messages.

International delivery is available through eBay's international shipping programme where the item and destination are eligible. eBay will display the countries currently available, delivery price, import charges and checkout options for the buyer's destination.

Checkout address: please make sure your delivery address is correct before payment. We cannot manually redirect an order to a different address after checkout; if an address is wrong, use eBay's order/cancellation process as available and reorder with the correct address.

WhatsApp QR for Fitment Help / Appointment Enquiries 

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.       
     
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.  

To minimise returns, please compare the part number and photos before ordering and ask for a VIN check if unsure. Buyer-ordered-in-error returns are handled under the return policy shown on eBay.

Returned items should be in the same condition and complete. Where eBay seller protections permit, a deduction of up to 50% may apply only for actual loss in value where a returned item has been used, altered, damaged or returned incomplete. Valid faulty/not-as-described claims remain subject to eBay's applicable buyer-protection rules.

VAT is not separately itemised and no reclaimable VAT invoice is available. The item is sold under the applicable Global Accounting / margin-scheme treatment.

Buying a correctly matched recycled component can keep a serviceable part in use, reduce demand for replacement manufacturing, and help divert automotive material from premature disposal. It also supports a local parts business and the people who inspect, catalogue, store, pack and dispatch thousands of individual components.

Thank you for choosing ThePartPilot and for checking fitment carefully — the right part first time saves time, transport, packaging and unnecessary returns. 🚗♻️📦

Orders are prepared for dispatch with attention to protecting the component in transit. Packaging method can vary with the size, weight and fragility of the part.