Toyota Aygo 2014-21 Citroen C1 Peugeot 108 2014-22 Centre Vent 55404-0H010
Buy by the moulded part number and physical design, not by registration year alone. Your existing component should show 55404-0H010 or 554040H010 and should match the photographs below.
Front and visible surface
|
Rear shape and mounting points
|
|
Reference vehicle: second-generation five-door Toyota Aygo
|
The part fits above the centre display at the top of the centre dashboard
|
| Part type | Centre upper dashboard air vent grille and trim panel |
| Main part number | 55404-0H010 |
| Alternative number format | 554040H010 |
| Position | Front upper centre dashboard |
| Side | Centre; not left or right handed |
| Colour | Black or dark charcoal |
| Finish | Textured matte plastic |
| Material marking | PP+E/P-TD15 moulded thermoplastic |
| Electrical connections | None |
| Programming or coding | Not required |
| Supplied | The dashboard vent and trim shown in the actual photographs |
This component forms the upper centre section of the dashboard. Its grille allows heating, ventilation and air-conditioning airflow to enter the passenger compartment while the outer panel provides the correct factory-shaped finish around the centre display area.
It is a passive mechanical component. It does not contain a motor, control unit, sensor, switch or wiring. Its function is to guide airflow, cover the dashboard opening and hold the correct visual alignment of the centre fascia.
| Vehicle | Production range | Body and engine notes | Required check |
|---|---|---|---|
|
Toyota Aygo Mk2 AB40 / KGB40 |
2014–2021 | Three-door and five-door hatchback; 1.0 petrol; pre-facelift and facelift. Dashboard part is not selected by door count. | Existing number and grille shape must match 55404-0H010. |
| Citroën C1 Mk2 | 2014–January 2022 | Three-door, five-door and Airscape versions; 1.0 and 1.2 petrol where the same centre-dashboard design is installed. | Match the moulded number, vent pattern, finish and mounting tabs. |
| Peugeot 108 | 2014–January 2022 | Three-door, five-door and TOP! fabric-roof versions; 1.0 and 1.2 petrol where the same dashboard design is installed. | Match the moulded number, visible profile and clip arrangement. |
| Toyota Aygo Mk1 | 2005–2014 first-generation model |
| Toyota Aygo X | 2022-on crossover model with a different dashboard |
| Citroën C1 Mk1 | 2005–2014 first-generation model |
| Peugeot 107 | 2005–2014 predecessor to the Peugeot 108 |
| Different trim variants | Any car whose original number, grille design, finish or rear mounting points differ |
This is a previously fitted factory-produced component. Expect normal age-related cosmetic wear, light surface marks, dust or handling marks. Please enlarge every actual item photograph and judge its cosmetic condition before ordering.
Dismantling or identification markings on the concealed rear surface are not normally visible after installation. Mounting points, vent openings and the visible finish should be compared closely with the component currently fitted to your vehicle.
| Cracked or damaged grille | Visible damage and an untidy dashboard appearance |
| Broken retaining tabs | Panel may lift, move, vibrate or rattle while driving |
| Warped outer trim | Uneven gaps around the centre dashboard and screen |
| Blocked or damaged openings | Airflow may be restricted or directed incorrectly |
| Heavy scratches or staining | Interior can appear poorly maintained even when mechanically sound |
A factory-produced replacement was designed around the original dashboard opening, retaining clips, surface texture and adjoining panels. This normally provides a more consistent fit than an inexpensive universal or copied trim piece.
Reusing a serviceable original component can also cost substantially less than purchasing a newly manufactured replacement. Actual saving depends on current dealer pricing, availability and the condition of the used component.
|
✓
Correct moulded profile
|
✓
Matching texture and vents
|
♻
Reduced manufacturing waste
|
| 1 | Switch off the ignition and remove the key. Protect the surrounding fascia with a clean cloth. |
| 2 | Compare the replacement part number, outer profile and every retaining point before removing the old panel. |
| 3 | Insert a plastic trim tool carefully beneath an accessible edge of the existing vent panel. |
| 4 | Release the retaining clips progressively. Do not twist one corner sharply or lever against the screen. |
| 5 | Remove loose debris from the dashboard opening and inspect the receiving slots for old broken clip pieces. |
| 6 | Align all replacement tabs with their corresponding slots before applying pressure. |
| 7 | Press evenly around the perimeter until securely seated, then check panel alignment and ventilation airflow. |
| Suggested tools | Plastic trim-removal tools, clean cloth and inspection light |
| Typical fitting time | Approximately 15–30 minutes |
| Difficulty | Basic to intermediate interior-trim work |
| Coding | None normally required because the component has no electronics |
| Garage rate | 15-minute estimate | 30-minute estimate |
|---|---|---|
| £50 per hour | £12.50 | £25.00 |
| £75 per hour | £18.75 | £37.50 |
| £100 per hour | £25.00 | £50.00 |
| £125 per hour | £31.25 | £62.50 |
Estimates cover labour only. A garage may apply a minimum booking charge, diagnostic charge or additional labour when clips or adjoining trim are damaged.
| 1. Check your vehicle generation | It must be Aygo Mk2, C1 Mk2 or Peugeot 108 |
| 2. Remove or inspect the old component | Find its moulded identification number |
| 3. Match the number | Confirm 55404-0H010 or 554040H010 |
| 4. Compare photographs | Check grille slots, outer profile, rear tabs and colour |
| 5. Ask before buying | Send the registration, VIN and old-part photograph through eBay Messages |
|
📦
More than 25,000 parts stocked
|
🛠
Over 25 years of parts experience
|
|
|
🚚
Tracked dispatch for qualifying orders completed before 3pm
|
🌍
International delivery through eBay where eligible
|
🔧
Fitting service subject to availability
|
Collection is available by appointment seven days a week, including bank holidays, until 8pm. Arrange collection through eBay Messages.
UK delivery: postage service and charge are shown separately within the listing and during checkout. Free postage is not promised by this description.
International delivery: offered through eBay’s international shipping service to destinations shown as eligible during checkout. Availability, import charges, restrictions and delivery times are controlled by eBay and the destination country.
Checkout address: buyers must confirm that the delivery address is complete and correct before payment. The seller cannot change an address after checkout.
Warranty: 30-day seller warranty, matching the current listing details. Warranty does not cover incorrect ordering, accidental damage, misuse or damage caused during installation.
Global Accounting VAT margin scheme: VAT is accounted for under the applicable margin scheme. No separate VAT amount is shown or available for the buyer to reclaim.
Please complete every fitment check before purchase. A registration lookup alone may not identify a dashboard trim variation, particularly where vehicles have been registered later than their production date.
Returns are handled in accordance with the formal listing return policy, eBay requirements and applicable consumer law. Where a buyer changes their mind or orders the wrong component, return postage responsibility is determined by the listing policy.
Items that arrive damaged, faulty or materially different from the listing are handled under the applicable eBay buyer-protection process. Returned components must be securely packed and sent back in the same condition in which they were supplied.
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Purchasing a quality used vehicle component helps extend the useful life of an existing part, reduces avoidable waste and lowers demand for new raw materials and manufacturing. Your order supports an independent automotive recycling and parts business while helping keep another vehicle on the road.
Orders are selected from stocked inventory, checked against the listing and packed to protect the component during transit.