Toyota Corolla E12 3 Door Front Right Seat Belt 73210-02130 2001-2004
Toyota Corolla E12 3 Door Front Right Seat Belt 73210-02130 2001-2004
TOYOTA COROLLA E12 FRONT RIGHT SEAT BELT ASSEMBLY
Factory Toyota Component • Used • Front Right Position
73210-02130 7321002130
Professionally sourced used vehicle component for the Toyota Corolla E12 family. Please match the stamped number, physical configuration, mounting points and electrical connections shown in the listing photographs before ordering.
PART IDENTIFICATION
| Specification | Listing Information |
|---|---|
| Manufacturer | Toyota |
| Part Type | Front Seat Belt / Retractor Assembly |
| Position | Front Right |
| Primary Part Number | 73210-02130 / 7321002130 |
| Vehicle Family | Toyota Corolla E12 |
| Source Listing Year | 2003 |
| Condition | Used vehicle component |
WHAT THIS COMPONENT DOES
This is the front-right occupant restraint belt and retractor assembly. The assembly uses high-strength woven seat-belt webbing together with a metal retractor mechanism, structural mounting hardware points and associated belt fittings.
Its primary function is to position and restrain the front-seat occupant. The retractor allows normal belt movement while its locking mechanism is designed to restrict rapid belt payout under appropriate operating conditions.
Seat belts form part of the vehicle's occupant restraint system. Some variants can incorporate additional restraint-system hardware or electrical connections. Never assume two assemblies are interchangeable simply because the vehicle model looks the same. Compare the exact number and connector/mounting configuration and obtain VIN-based confirmation where required.
WHY CHOOSE FACTORY VEHICLE PARTS?
Correct Engineering
Factory components were engineered around the vehicle's original mounting geometry, dimensions and operating requirements.
Premium Materials
Avoid low-grade copies where material quality, dimensions, fit and durability may differ from the vehicle's original specification.
Save Up To 70%
Premium recycled components can offer substantial savings compared with purchasing an equivalent brand-new factory component, with savings of up to 70% on selected parts.
OVER 25,000 PARTS PHYSICALLY IN STOCK ON OUR SHELVES
COMPATIBILITY & FITMENT REFERENCE
Fitment must not be determined from registration, model name or eBay's automated compatibility selector alone. For a safety-critical restraint component, verify the vehicle VIN against the manufacturer's parts catalogue and compare the exact stamped number and physical configuration before installation.
| Vehicle | Reference | Status |
|---|---|---|
| Toyota Corolla | E12 generation | Reference vehicle family |
| Body | 2/3-door hatchback donor reference | Verify before purchase |
| Series Period | 11/2001 – 02/2004 donor-series reference | Not a blanket fitment claim |
| Position | Front Right | Verify LHD/RHD application |
| Part Number | 73210-02130 / 7321002130 | Must be compared |
Front-right remains physically front-right, but driver/passenger terminology changes between right-hand-drive and left-hand-drive markets. Match by physical position, VIN and stamped part number.
3-DOOR vs 5-DOOR — CHECK BEFORE ORDERING
3-DOOR HATCHBACK
✓ Verified donor-style reference exists for 73210-02130.
Still compare your VIN, stamped number, mounting arrangement and listing photographs.
5-DOOR HATCHBACK
✕ DO NOT ASSUME INTERCHANGEABILITY.
Similar-looking E12 components may have different belt geometry, brackets or specifications. VIN/part-number verification is required.
WILL NOT FIT / EXCLUSION LIST
- Any vehicle where the installed part number does not cross-reference to 73210-02130 / 7321002130.
- Left-side assemblies when a front-right assembly is required.
- Vehicles with incompatible mounting brackets, belt geometry or electrical connectors.
- Similar-looking Corolla generations outside the E12 family unless the manufacturer catalogue specifically confirms the number.
- Corolla Verso or other body derivatives unless separately confirmed by VIN/manufacturer catalogue.
- Facelift or production-change vehicles where the manufacturer catalogue specifies a different restraint assembly.
Do not order from appearance alone. Toyota can change components during a production run. Exact stamped-number and VIN-based verification is the safest purchasing method.
TECHNICAL LOCATION REFERENCE
FRONT RIGHT OCCUPANT RESTRAINT POSITION
The outer front belt/retractor is normally installed within the structural side/B-pillar area adjacent to the applicable front seating position, with the belt routed through its specified upper and lower mounting points.
REFERENCE ONLY: Exact mounting arrangement, trim removal sequence, electrical configuration and fastener torque must be taken from the Toyota workshop information applicable to the vehicle VIN.
PROFESSIONAL FITTING GUIDANCE
Typical Required Tools
- Appropriate trim-removal tools
- Correct metric socket and ratchet set
- Calibrated torque wrench
- Suitable electrical connector tools where applicable
- Vehicle-specific workshop information / torque data
- Suitable diagnostic equipment if required by the restraint system
Typical Workshop Sequence
- Confirm the replacement component against the vehicle VIN, stamped part number and physical configuration.
- Follow Toyota's specified safety procedure before disturbing any restraint-system component.
- Remove the relevant interior trim using the manufacturer procedure to avoid damaging clips or restraint hardware.
- Identify and inspect all belt anchor points, brackets and any fitted electrical connections.
- Remove the existing assembly in accordance with the workshop manual.
- Install the replacement assembly in the correct orientation, ensuring the webbing is not twisted, trapped or damaged.
- Tighten all safety-restraint fasteners to the exact VIN-specific manufacturer torque specification.
- Reassemble trim and complete the applicable restraint-system functional and diagnostic checks before returning the vehicle to service.
Typical workshop allowance: approximately 1.0–1.5 hours, depending on trim configuration, corrosion, access and vehicle specification. This is an estimate, not a manufacturer labour time.
ESTIMATED GARAGE LABOUR COST
Based on an estimated 1.0–1.5 hour installation window:
| Estimated Time | £40/hr | £60/hr | £80/hr | £100/hr |
|---|---|---|---|---|
| 1.0 hour | £40 | £60 | £80 | £100 |
| 1.5 hours | £60 | £90 | £120 | £150 |
Labour figures are illustrative only. Diagnostic work, damaged trim, seized fixings or additional restraint-system procedures may increase workshop time.
We also offer professional fitting at our repair facility, subject to technician and workshop availability. Please contact us through eBay Messages for current availability.
PROFESSIONAL AUTOMOTIVE SUPPORT
From dismantling and component identification through to professional workshop support, THEPARTPILOT is focused on helping customers obtain the correct component the first time.
25,000+ PARTS READY ON OUR SHELVES
THEPARTPILOT carries more than 25,000 vehicle parts in stock, covering mechanical, electrical, interior, exterior and structural component categories.
Need another component for the same vehicle? Browse our eBay shop or contact us through eBay Messages with the VIN and required component.
WE BUY CARS FOR CASH
Nationwide Collection & Same-Day Payment
Vehicle purchasing services are subject to inspection, valuation, availability and applicable terms. Please use the permitted eBay communication channels where applicable.
DELIVERY & INTERNATIONAL SHIPPING
UK DELIVERY
Postage is not free. Buyers pay the calculated shipping charge displayed by eBay at checkout.
WORLDWIDE
Eligible international orders can be securely processed through eBay's Global Shipping Programme or eBay International Shipping where enabled for the seller/item.
Eligible destinations can include the UK, Europe, USA, Australia, Canada and numerous other international markets. Availability and final postage/import charges are determined by the eBay checkout system for the buyer's destination.
CAREFULLY PACKED FOR DISPATCH
Components are prepared and securely packed for transport with the aim of protecting vulnerable mounting points and surfaces during delivery.
VAT MARGIN SCHEME
PLEASE VERIFY BEFORE ORDERING
Buyers are strongly urged to verify fitment using the high-resolution listing photographs, exact stamped part number, mounting arrangement and electrical connections rather than relying solely on automated eBay item-specific or vehicle-compatibility dropdowns.
Where a statutory or eBay return right applies, returns will be handled in accordance with applicable UK consumer law and the return policy displayed on the eBay order. Buyers are responsible for taking reasonable care of returned goods. Where legally permitted, any refund deduction will be limited to an amount justified by diminished value caused by handling beyond what is reasonably necessary to establish the item's nature, characteristics and suitability. No fixed restocking deduction is automatically applied merely because a buyer changes their mind or orders the incorrect variant.
USED COMPONENT CONDITION
This is a previously used automotive component. Normal age-related cosmetic marks, storage marks and signs of prior installation may therefore be present.
The listing photographs form an important part of the description. Please examine them carefully before purchasing, particularly all labels, stamped numbers, connectors, brackets and mounting points.
HOW TO FIND US / CUSTOMER SUPPORT
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.