TOYOTA YARIS MK2 P9 2006-2011 06-11 FRONT ROOF MAP READING LIGHT 81260-0D030

Actual Item — High Resolution Reference

These photographs show the actual component reference used to build this listing. Use the stamped number and physical details as your strongest compatibility check.

Rear electrical and mounting structure

Factory mouldings, metal contact carrier and origin markings

Exact stamped number: 81260-0D030

Moulded housing and contact detail

Grey bezel with twin clear reading-light lenses

Side profile and retaining hardware

Item Details & Engineering Specification

Why Choose a Factory-Original Used Component?

Vehicle Compatibility — Exact Matching Required

Fitment-Era Vehicle Reference

These photographs show the correct XP90-generation styling era. They are visual generation/facelift references only — the exterior appearance of the car cannot confirm the roof lamp fitted inside it.

2006-2008 styling reference — XP90-generation Yaris

2009-2011 facelift styling reference — XP90-generation Yaris

Will Not Fit / Do Not Assume Compatibility

• Do not order if your original number is different from 81260-0D030 unless you have independently confirmed the substitution for your exact vehicle.
• Do not assume an 81260-0D030-E0 trim version is appearance-identical to this grey unit.
• Some 2009-2011 trim/equipment combinations use different map-lamp versions, including documented 81260-0D050-B0 and 81260-0D050-E0 LHD applications.
• Do not buy solely because your vehicle is registered between 2006 and 2011.
• Do not assume compatibility with an earlier Yaris Mk1 or later Yaris generation because the roof light looks similar.
• This is not a universal interior light.
• Automated vehicle-fitment dropdowns are useful aids but must not override a conflicting stamped number, connector or photograph.

Technical Mounting Reference

This component does not mount to a suspension or structural chassis rail. Its correct physical location is the front roof/headliner lamp aperture, so the locator below deliberately shows the true mounting path.

Professional Fitting Guide

Recommended tools

• Nylon / non-marring interior trim tool
• Small cross-head screwdriver where required
• Small protected flat trim tool where required
• Good inspection torch
• Clean work gloves
• Optional multimeter for electrical diagnosis

Step-by-step replacement

1. Switch the ignition off, remove the key and ensure the interior lamps are switched off. Allow any illuminated bulb area to cool.
2. Protect the surrounding headliner and trim before applying any tool.
3. Before removal, compare your existing lamp with the photographs and confirm the stamped part number.
4. Carefully release the lamp bezel/retaining points. Remove any applicable screw fastener before attempting to pull the assembly down.
5. Lower the lamp gently from the front headliner aperture. Do not pull on the wiring.
6. Release the electrical connector by its locking tab and unplug the unit.
7. Compare connector keying, mounting points, grey trim, electrical layout and 81260-0D030 marking side-by-side.
8. Connect the replacement unit and perform a controlled function test before fully seating it in the headliner.
9. Reinstall evenly, ensuring the headliner is not trapped and all mounting/retention points engage correctly.
10. Carry out a final left/right reading-light and switch-operation check.

Static Garage Labour Cost Guide

Based on the estimated 0.5-hour straightforward replacement time. Figures below are labour-only illustrations, not quotations.

Additional electrical diagnosis, connector repair, damaged trim, headliner work or seized/missing fixings would be charged separately by the chosen repairer.

Warehouse Stock & Dispatch

Professional automotive-parts warehouse reference image.

Workshop & Repair Support

Correct diagnosis is always valuable. If your original lamp does not illuminate, consider checking the relevant fuse, power supply, ground, connector condition and bulb/light-source condition before replacing parts unnecessarily.

Postage, International Delivery & Dispatch

For eligible items and destinations, eBay's Global Shipping Programme can provide international delivery to supported markets across Europe and destinations including the USA, Australia, Canada and many other participating countries. Eligibility and charges are determined by eBay at checkout.

Dispatch-process stock illustration — your order will be prepared for protected transit using packaging appropriate to the component.

VAT / Margin Scheme Information

Returns — Protect the Part & Verify Before Ordering

If you change your mind or order the incorrect variant, please follow the return process and the return terms displayed by eBay for this listing.

Where the seller is eligible under eBay seller-protection rules and an item is returned used, altered, damaged, incomplete or in a materially different condition from the condition in which it was dispatched, an appropriate deduction of up to 50% may be made from the refund solely to reflect the actual loss in item value.

No automatic 50% restocking deduction is applied merely because a buyer changed their mind or ordered the wrong version when the item is returned in the same condition.

Nothing in this description removes or reduces any statutory consumer rights or applicable rights provided through eBay.

How to Find Us / Customer Support