Toyota Yaris Mk2 XP90 2005-2011 Fuel Filler Flap Lid + Cap 3/5Dr 77350-52130

This listing has been researched from the actual item photographs first and then checked against vehicle/parts catalogue references. Registration year alone is not sufficient, particularly for 2011 vehicles, because different Yaris generations can overlap by registration date.

For the safest match, compare the shape, hinge position, cap/tether arrangement, body style and chassis/model code with your existing part. If unsure, message us through eBay before purchase with your chassis/VIN details and clear photographs of your existing component.

The fuel flap is positioned on the rear quarter of the XP90-family hatchback and covers access to the fuel-filler neck. The following photographs are REFERENCE VEHICLES ONLY and are not photographs of the donor vehicle.

REFERENCE — XP90-family 5-door hatchback body

Public-domain reference image. Market specification/trim may differ. Use for body-shape and fuel-flap-location reference only.

REFERENCE — XP90-family 3-door hatchback body

Public-domain reference image. Market specification/trim may differ. Use for body-style identification only.

• Confirm your car is an XP90-family Yaris/Vitz hatchback.
• Compare your old flap shape and hinge arrangement with the actual item photographs above.
• Confirm whether your vehicle is 3-door or 5-door.
• For 2011 vehicles, identify the actual chassis/body generation rather than relying on registration year.
• Check your chassis/VIN/frame details against the catalogue reference where possible.
• Do not assume the silver/grey paint is an exact colour match — repainting may be needed.
• If anything differs, message us through eBay before buying.

The outer filler flap forms the painted exterior cover over the vehicle's fuel-filler opening. Its hinge allows the panel to swing open for refuelling and return flush with the rear bodywork when closed.

The fuel cap is the functional sealing component at the filler neck. It closes the filler opening and contributes to the fuel-vapour sealing system. The outer painted flap itself does not meter fuel or control engine operation.

A manufacturer-produced donor component starts with the geometry intended for the vehicle's body aperture, hinge position and surrounding panel profile. That can make it a better starting point for correct panel alignment than an inexpensive reverse-engineered alternative where dimensions or finishing may differ.

Choosing a quality pre-owned component can also reduce the cost of repairing an older vehicle. On selected components the saving compared with some new replacement prices can potentially be substantial — even approaching 70% in some cases — although the actual saving depends on the specific part, condition and new-price comparison and is not guaranteed.

Always judge this individual part from its photographs and fitment information rather than assuming every pre-owned component is identical in cosmetic condition.

• Small socket and ratchet set
• Phillips / flat trim screwdriver as required
• Plastic trim tool
• Small pick or pliers for tether/clip work where required
• Masking tape or clean protective cloth for surrounding paintwork
• Work light

Fastener type/size can vary by vehicle specification, so inspect the vehicle before starting.

1. Park safely on level ground, switch the engine off and protect the surrounding painted quarter panel.
2. Open the existing fuel flap and photograph its hinge alignment and panel gap before removal.
3. Inspect the filler cap/tether arrangement and transfer components only if required.
4. Support the existing flap while removing the hinge fasteners.
5. Withdraw the old assembly carefully without dragging it against the surrounding paint.
6. Position the replacement assembly and start the fasteners by hand before final tightening.
7. Align the circular flap so it sits evenly and flush with the quarter panel.
8. Tighten evenly and re-check opening, closing, hinge movement and panel clearance.
9. Confirm the cap and tether are secure and the cap tightens/seals correctly.

eBay does not allow the JavaScript needed for an interactive calculator, so this static chart gives the same calculation without active content. Labour estimate = hourly rate × time used.

Labour illustration only. Actual quotes vary by garage, location, additional repairs, supplies, diagnosis, tax treatment and the condition of the vehicle.

Subject to workshop availability. Please message us through eBay before ordering if you would like to ask about fitting for this component.

This listing currently uses eBay's international shipping programme where available. Destination eligibility, shipping charge, import charges and delivery estimate shown by eBay at checkout take priority over the information below.

Customers must ensure the delivery address selected at eBay checkout is correct. We cannot simply redirect an order to a different address after checkout. If you notice an address error, contact us through eBay as quickly as possible; cancellation and re-ordering may be required.

This item is sold under our Global Accounting VAT Margin Scheme treatment. VAT is accounted for under the scheme and is not separately itemised; no separate reclaimable VAT amount is shown on the invoice.

We have deliberately provided detailed fitment information, chassis references, actual-item photographs and a non-fitment guide to help customers purchase the correct part first time.

Returns are handled in accordance with the return policy displayed on the eBay listing, eBay's applicable rules and the buyer's statutory rights. Please return any item complete and in the same condition in which it was supplied.

If you are uncertain about compatibility, contact us through eBay before ordering. We would much rather help check a chassis/photo match before dispatch than have you receive the wrong component.

Buying a quality pre-owned vehicle component supports a local independent parts business while also extending the useful life of an existing component. Reusing serviceable vehicle parts can reduce demand for additional manufacturing, packaging and material consumption compared with replacing every component with a newly manufactured item.

🚗 Every correctly matched component kept in service is one less usable part unnecessarily discarded. Thank you for supporting ThePartPilot and helping us keep repairable vehicles on the road.

Stocked parts are checked against the order, prepared for transport and packed for dispatch. Please examine the actual-item photographs before ordering because cosmetic pre-owned components may show normal age-related marks.

WhatsApp QR for Fitment Help / Appointment Enquiries